Selelekela
This manual provides essential information for the proper installation, maintenance, and care of your Vision SW60B wheel. Please read these instructions thoroughly before proceeding with installation or use to ensure safety and optimal performance.
Sehlahisoa se Felletseview
Image: The Vision SW60B black steel wheel, featuring multiple circular cutouts for ventilation and a central hub bore.
The Vision SW60B is a durable one-piece aluminum wheel designed for various vehicle applications. It features a black finish and is engineered to meet specific load and fitment requirements.
- Boitsebiso: One Piece Aluminum
- Mmala: Ntsho
- Moralo: Steel-style appearance with multiple ventilation holes.
Ho seta le ho Kenya
Proper installation is critical for safety and performance. It is highly recommended that wheel installation be performed by a qualified professional.
Important Pre-Installation Checks:
Image: A notice emphasizing the importance of test fitting wheels before mounting tires and verifying compatibility.
- Verify Fitment: Before mounting tires, always test fit the wheel on your vehicle's hub to ensure proper clearance and fit. Pay close attention to the wheel's center bore diameter (71.5mm for this model) and compare it to your vehicle's hub diameter. An incorrect fit can lead to vibrations, premature wear, or unsafe driving conditions.
- Bolt Pattern Match: Confirm that the wheel's bolt pattern (5x114.3mm or 5x4.5 inches) matches your vehicle's lug pattern.
- Clearance Check: Ensure adequate clearance between the wheel and brake calipers, suspension components, and fender wells.
- Tire Mounting: Once tires are mounted, the wheels are considered used and may not be returnable. Ensure all checks are completed prior to tire mounting.
Mehato ea ho Kenya:
- Netefatsa hore koloi e phahamisitsoe ka mokhoa o sireletsehileng 'me e tšehetsoa holim'a li-jack stand.
- Clean the vehicle's hub mounting surface to remove any rust, dirt, or debris.
- Carefully place the wheel onto the hub, ensuring it sits flush against the mounting surface.
- Install lug nuts and hand-tighten them in a star pattern.
- Lower the vehicle until the tires just touch the ground, then torque the lug nuts to the vehicle manufacturer's specified torque settings using a torque wrench. Always follow the recommended tightening sequence (star pattern).
- Fully lower the vehicle.
- After the first 50-100 miles of driving, re-torque all lug nuts to ensure they remain properly tightened.
Tataiso ea Ts'ebetso
While wheels do not have "operating" functions in the traditional sense, adhering to certain guidelines ensures their longevity and safe performance.
- Tlhahlobo ea Kamehla: Periodically inspect wheels for any signs of damage, such as bends, cracks, or excessive corrosion.
- Khatello ea Tire: Maintain correct tire pressure as specified by your vehicle manufacturer. Incorrect pressure can affect wheel integrity and vehicle handling.
- Qoba ho Tlameha: Do not exceed the wheel's maximum load rating (1550 LBS) or your vehicle's Gross Vehicle Weight Rating (GVWR).
- Mekhoa ea ho Khanna: Avoid hitting potholes, curbs, or other road hazards at high speeds, as this can cause wheel damage.
Tlhokomelo le Tlhokomelo
Proper maintenance will preserve the appearance and structural integrity of your Vision wheels.
- Ho hloekisa: Clean wheels regularly using mild soap and water. Avoid harsh abrasive cleaners, acid-based cleaners, or stiff brushes, which can damage the finish.
- Ho omisa: Dry wheels thoroughly after washing to prevent water spots and corrosion.
- Tshireletso: Consider applying a non-abrasive wheel sealant or wax to protect the finish.
- Polokelo: If storing wheels, ensure they are clean and dry, and store them in a cool, dry place away from direct sunlight and extreme temperatures.
Ho Rarolla Mathata a Tloaelehileng
This section addresses common concerns related to wheel performance.
| Hlahisa | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Vibration after installation |
|
|
| Premature wear on lug nuts/studs |
|
|
| Corrosion/Finish degradation |
|
|
Litlhaloso
| Tšobotsi | Boleng |
|---|---|
| Mohlala | SW60B |
| Nomoro ea Karolo ea Moetsi | SW60-7665B39 |
| Boholo | Li-inchi tse 17x6.5 |
| Mohlala oa Bolt | 5x114.3 mm (5x4.5 inches) |
| Offset | 39 limilimithara |
| Setsi Bore | 71.5 limilimithara |
| Backspace | 5.29 inch |
| Approximate Wheel Weight | 30 LBS |
| Wheel Load Rating | 1550 LBS |
| Lintho tse bonahalang | One Piece Aluminum |
| Mmala | Ntsho |
| UPC | 886821172979 |
Warranty le Tšehetso
Specific warranty details for Vision wheels are typically provided at the point of purchase or on the manufacturer's official websebaka. Ka kopo, boloka bopaki ba theko bakeng sa likopo life kapa life tsa tiisetso.
For technical support, installation questions, or warranty inquiries, please contact Vision customer service or your authorized dealer. Contact information can usually be found on the manufacturer's websaete kapa litokomane tseo u li rekileng.
