Hyper Tough 6-Outlet Surge Protector

1. Selelekela

This manual provides instructions for the safe and effective use of your Hyper Tough 6-Outlet Surge Protector. This product is designed to protect your electronic devices from power surges and spikes, ensuring their longevity and safe operation. This package includes two (2) surge protectors.

Setšoantšo sa 1.1: Pele view of the Hyper Tough 6-Outlet Surge Protector, showing the six grounded outlets, the 2.5-foot power cord, and the illuminated on/off switch with integrated circuit breaker.

2. Boitsebiso ba Tšireletseho

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or property damage.

• BAKENG SA TŠEBELETSO EA KA HARARE FEELA: Do not use this surge protector outdoors or in wet environments.
• LITEKANYETSO TSA MOTSI: Do not exceed the electrical ratings of 120V/15A/60Hz. Overloading the surge protector can cause the circuit breaker to trip or create a fire hazard.
• DO NOT DAISY-CHAIN: Do not plug one surge protector into another.
• HO SEBELISA: Ensure the surge protector is plugged into a properly grounded 3-prong outlet.
• TŠIRELETSO EA NGANA: Boloka moo bana ba ka fihlang teng.
• HLAHLOBA HANGATA: Periodically inspect the surge protector and connected cords for damage. Discontinue use if any damage is found.

3. Likahare tsa Sephutheloana

Netefatsa hore lintho tsohle li teng ka har'a sephutheloana sa hau:

• Two (2) Hyper Tough 6-Outlet Surge Protectors (Model: PS682B_2PKW)

4. Likarolo

Your Hyper Tough 6-Outlet Surge Protector includes the following features:

• Tšireletso ea Surge: Protects electronics from power surges and spikes with 500-Joule protection.
• Libaka tse ngata: Provides six (6) grounded outlets for connecting multiple devices.
• Moralo oa Compact: Rectangular shape designed to take up minimal space.
• Kaho e Ts'oarellang: Made from tough plastic material for lasting use.
• Tšireletso e netefalitsoeng: Meets UL standards for surge protection.
• Sekhahla se Kopantsoeng sa Potoloho: Lighted on/off switch with a built-in 15A circuit breaker to prevent overloading.
• Mohala oa Matla: Features a 2.5-foot (76cm) 14-gauge, 3-prong power cord.

5. Ho seta le ho kenya

1. Sebaka: Choose a dry, indoor location for the surge protector, away from heat sources or direct sunlight.
2. Hokela: Insert the surge protector's 3-prong plug firmly into a standard 120V AC grounded wall outlet.
3. Hokela Lisebelisoa: Plug your electronic devices into the six available outlets on the surge protector. Ensure the total power draw does not exceed the surge protector's rating (15A).
4. Matlafatsa: Press the lighted on/off switch to the "ON" position. The switch will illuminate when power is supplied to the outlets.
5. Boikhethelo ba ho Homaha Lebota: The surge protector features keyhole slots on the back for wall mounting.
   

   Setšoantšo sa 5.1: Morao view of the Hyper Tough 6-Outlet Surge Protector, illustrating the keyhole slots for optional wall mounting.

   To mount, measure the distance between the keyhole slots, install two screws (not included) into the wall at the measured distance, leaving the screw heads slightly protruding. Align the keyhole slots with the screw heads and slide the surge protector down to secure it.

6. Ts'ebetso

The Hyper Tough 6-Outlet Surge Protector is designed for simple operation:

• Taolo ea Matla: Use the lighted on/off switch to control power to all connected devices. When the switch is illuminated, power is supplied.
• Tšireletso ea Surge: The surge protector continuously monitors incoming power and diverts excess voltage away from your connected electronics during a power surge or spike.
• Setsi sa Breaker: In the event of an overload (when connected devices draw more than 15 amps), the built-in circuit breaker will automatically trip, cutting power to the outlets to prevent damage. The on/off switch will no longer be illuminated.

7. Tlhokomelo

Ho netefatsa ts'ebetso e nepahetseng le bophelo bo bolelele ba mosireletsi oa hau oa surge:

• Ho hloekisa: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Wipe with a dry, soft cloth. Do not use liquid or aerosol cleaners.
• Tlhahlobo: Periodically check the power cord and the surge protector housing for any signs of damage, such as frayed wires, cracks, or discoloration. If damage is observed, discontinue use immediately.

8. Ho rarolla mathata

No power to connected devices / On/Off switch is not illuminated.

Seo e ka bang Sesosa: Sekhechana sa potoloho se khoptjoa ka lebaka la moroalo o mongata.

Tharollo: Disconnect some devices from the surge protector. Press the on/off switch firmly to reset the circuit breaker. If the switch does not reset or immediately trips again, reduce the number of connected devices or ensure they do not exceed the 15A rating. If the issue persists, try plugging the surge protector into a different wall outlet to rule out an issue with the original outlet.

Surge protector feels warm.

Seo e ka bang Sesosa: Normal operation or slight overload.

Tharollo: A slight warmth during operation is normal. However, if the surge protector feels excessively hot, immediately disconnect it from the wall outlet and all devices. This could indicate an overload or internal fault. Reduce the load or discontinue use.

9. Litlhaloso

10. Tiisetso le Tšehetso

For warranty information or technical support regarding your Hyper Tough 6-Outlet Surge Protector, please refer to the documentation included with your purchase or contact the manufacturer directly. Manufacturer contact details are typically available on the product packaging or their official websebaka.

Ka kopo, boloka bopaki ba theko ea hau bakeng sa likopo tsa tiisetso.