SKYTECH ST-194D Digital Radio User Manual

1. Selelekela

Kea leboha ha u rekileasing the SKYTECH ST-194D Digital Radio. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new radio. Please read this manual thoroughly before using the device to ensure optimal performance and longevity. Keep this manual for future reference.

2. Boitsebiso ba Tšireletseho

Ho netefatsa ts'ebetso e bolokehileng le ho thibela tšenyo, ka kopo ela hloko mehato e latelang:

• Do not expose the radio to extreme temperatures, direct sunlight, or high humidity.
• Qoba ho liha kapa ho beha sesebelisoa tlas'a tšusumetso e matla.
• Do not attempt to disassemble or modify the radio. This will void the warranty and may cause damage.
• Use only the specified battery type (if applicable) and ensure correct polarity during installation.
• Beha sesebelisoa hole le metsi kapa maro a mang.
• Hloekisa radio ka lesela le bonolo, le omileng. U se ke ua sebelisa li-cleaner tse khorofo kapa li-solvent.

3. Likahare tsa Sephutheloana

Ka kopo, sheba sephutheloana sa lintho tse latelang:

• SKYTECH ST-194D Digital Radio
• Bukana ea mosebelisi (tokomane ena)

Note: Batteries may not be included and might need to be purchased separately.

4. Sehlahisoa Overview

Familiarize yourself with the components and controls of your SKYTECH ST-194D Digital Radio.

Setšoantšo sa 1: Pele view of the SKYTECH ST-194D Digital Radio. The image displays the silver-colored radio with its telescopic antenna extended. On the front, a speaker grille is visible on the left, and a digital display with control buttons is on the right. Below the display are buttons for alarm and time settings, along with switches for DX/Local reception and AM/FM band selection. A black wrist strap is attached to the side.

Taolo le Likarolo:

• Antenna ea Telescopic: For improved radio signal reception.
• Sepikara Grille: Tlhahiso ea molumo.
• Pontšo ea Dijiti: Shows time, frequency, and alarm status.
• AL SET Button: E sebedisetswa ho seta nako ya alamo.
• Konopo ea HORA: Adjusts the hour for time and alarm settings.
• Konopo ea TIMA: Powers off the radio.
• TIME SET Button: E sebedisetswa ho beha nako ya jwale.
• MIN Konopo: Adjusts the minute for time and alarm settings.
• AL ON/OFF Button: E tima kapa e bulela alamo.
• TUNE Button: Adjusts the radio frequency.
• DX.LOCAL Switch: Selects between distant (DX) and local signal reception.
• AM ON Switch: Activates the AM radio band.
• FM ON Switch: Activates the FM radio band.
• Leqhoa la Letsoho: For portable carrying.

5. Seta

5.1 Ho kenya Betri

The SKYTECH ST-194D is battery-powered. To install batteries:

1. Locate the battery compartment cover on the back or side of the radio.
2. Thellela kapa u hule sekoahelo ho bula phaposi.
3. Insert the required batteries (e.g., AA or AAA, check compartment for type) according to the polarity indicators (+ and -).
4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

Note: Ensure batteries are inserted correctly. Incorrect installation can damage the device.

6. Litaelo tsa Ts'ebetso

6.1 Ho Matlafatsa/Ho tima

• To power on the radio, ensure batteries are installed and slide the AM ON or FM ON fetohela boemong ba 'ON'.
• To power off the radio, press the TLOA konopo.

6.2 Tuning the Radio (FM Band)

The SKYTECH ST-194D supports FM radio reception.

1. Eketsa antenna ea telescopic bakeng sa kamohelo e nepahetseng.
2. Tsamaisa the FM ON fetohela boemong ba 'ON'.
3. Sebelisa le TUNE button to scan for and select your desired FM station. The frequency will be displayed on the digital screen.
4. Adjust the antenna position for the clearest signal.

6.3 Ho Ipehela Nako

1. Tobetsa o hatelle NAKO SEBETSO button until the hour display starts flashing.
2. Tobetsa ea HORA konopo ho fetola hora.
3. Tobetsa ea NAKO SEBETSO button again, and the minute display will flash.
4. Tobetsa ea MIN konopo ho fetola motsotso.
5. Tobetsa NAKO SEBETSO hape ho netefatsa le ho tswa mokgweng wa ho seta nako.

6.4 Ho Hlophisa Alamo

1. Tobetsa o hatelle AL SET button until the alarm hour display starts flashing.
2. Tobetsa ea HORA konopo ho fetola hora ea alamo.
3. Tobetsa ea AL SET button again, and the alarm minute display will flash.
4. Tobetsa ea MIN konopo ho fetola motsotso oa alamo.
5. Tobetsa AL SET hape ho netefatsa le ho tswa mokgweng wa ho seta alamo.
6. Ho kenya kapa ho tima alamo, tobetsa konopo AL ON/NOA button. An alarm icon will typically appear on the display when the alarm is active.

6.5 DX.LOCAL Switch

The DX.LOCAL switch helps optimize reception:

• Beha ho SEBAKA for strong, nearby radio stations. This setting helps reduce interference from distant signals.
• Beha ho DX (Distant) for weaker, far-away radio stations. This setting increases sensitivity to pick up fainter signals.

7. Tlhokomelo

7.1 Ho hloekisa

Wipe the radio with a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the surface or internal components.

Tlhokomelo ea Battery

• Tlosa libeteri haeba radio e ke ke ea sebelisoa nako e telele ho thibela ho lutla.
• Lahla libeteri tse sebelisitsoeng ka boikarabelo ho latela melao ea sebaka.

8. Ho rarolla mathata

9. Litlhaloso

10. Tiisetso le Tšehetso

This product is designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.