WORX Xceed EX52BC 4-in-1 Gasoline Multi-Tool User Manual

1. Selelekela

This manual provides comprehensive instructions for the safe and effective use of your WORX Xceed EX52BC 4-in-1 Gasoline Multi-Tool. This versatile tool combines a brush cutter, pole saw, hedge trimmer, and string trimmer into a single unit, powered by a robust 52 cm³ 2-stroke engine. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper function and user safety. Keep this manual for future reference.

2. Litemoso tsa Bohlokoa tsa Polokeho

TLHOKOMELISO: Failure to follow these safety instructions can result in serious injury or death. Always exercise extreme caution when operating power tools.

• Kamehla roala thepa e loketseng ea ho itšireletsa (PPE), ho kenyeletsoa likhalase tsa tšireletso, tšireletso ea kutlo, liatlana, le lieta tse tiileng.
• Be aware of flying debris. Ensure bystanders and pets are kept at a safe distance (at least 15 meters / 50 feet) from the work area.
• Do not operate the tool in wet conditions or in the presence of flammable liquids or gases.
• Before performing any maintenance, cleaning, or attachment changes, always turn off the engine and ensure all moving parts have stopped.
• Inspect the tool for damage before each use. Do not operate if any parts are damaged or missing.
• Use only the fuel mixture specified (1:40 gasoline to 2-stroke oil).
• Keep hands and feet away from cutting attachments while the engine is running.
• Never modify the tool or use non-approved attachments.

3. Likahare tsa Sephutheloana

Verify that all items listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

Setšoantšo sa 3.1: Fetileview of the WORX Xceed EX52BC 4-in-1 Multi-Tool and its attachments. This image displays the main engine unit, pole saw, hedge trimmer, brush cutter with blade, string trimmer head, shoulder strap, and assembly tools.

Setšoantšo sa 3.2: The core engine unit with the main shaft and D-handle attached. This is the power source for all attachments.

Setšoantšo sa 3.3: The pole saw attachment, featuring a chainsaw bar and chain for pruning branches at height.

Setšoantšo sa 3.4: The hedge trimmer attachment, designed for shaping and trimming hedges and shrubs.

Setšoantšo sa 3.5: The brush cutter attachment, equipped with a durable 4-tooth metal blade for clearing dense brush and thick weeds.

Setšoantšo sa 3.6: The string trimmer attachment, featuring a dual-line spool for trimming grass and light vegetation.

• Main Engine Unit with Handle
• Pole Saw Attachment
• Sehokelo sa Hedge Trimmer
• Brush Cutter Attachment (with 4-tooth metal blade)
• String Trimmer Attachment (with dual-line spool)
• Shoulder Strap with Hip Protection
• Tool Kit (for assembly and maintenance)
• Fuel Mixing Bottle (not explicitly shown but implied for 2-stroke engine)
• Bukana ea mosebelisi (tokomane ena)

4. Kopano le Setupo

The WORX Xceed EX52BC is designed for quick assembly. Follow these steps to prepare your multi-tool for use.

4.1 Ho hokela Setshoaro

1. Loosen the bolts on the D-handle clamp.
2. Position the D-handle on the main shaft at a comfortable operating height.
3. Tighten the bolts securely using the provided tool.

4.2 Attaching the Desired Tool Head

All tool heads attach to the main engine unit via a quick-release coupling system.

1. Ensure the engine is off and cool.
2. Align the shaft of the desired attachment (e.g., pole saw, hedge trimmer) with the coupling on the main engine unit.
3. Push the attachment shaft into the coupling until it clicks into place.
4. Secure the attachment by tightening the quick-release knob or lever.
5. To remove, loosen the quick-release knob/lever and pull the attachment shaft out.

4.3 Tokisetso ea Motsoako oa Mafura

This tool uses a 2-stroke engine. It requires a specific mixture of unleaded gasoline and 2-stroke engine oil.

• Karolelano ea ho Kopanya: 1 part 2-stroke oil to 40 parts unleaded gasoline (1:40).
• Use a clean, approved fuel container.
• Pour the correct amount of 2-stroke oil into the container, then add the gasoline.
• Shake the container gently to ensure thorough mixing.
• Always use fresh fuel mixture. Do not store mixed fuel for more than 30 days.

4.4 Filling the Fuel Tank

1. Ensure the engine is off and cool.
2. Move the tool to a well-ventilated outdoor area, away from ignition sources.
3. Carefully open the fuel tank cap.
4. Pour the prepared fuel mixture into the tank, being careful not to overfill. Leave a small air gap.
5. Securely close the fuel tank cap. Wipe up any spilled fuel immediately.

5. Litaelo tsa Ts'ebetso

5.1 Ho qala Enjene

1. Beha sesebelisoa sebakeng se bataletseng, se tsitsitseng.
2. Press the primer bulb several times until fuel is visible in the return line.
3. Set the choke lever to the "START" or "CLOSED" position.
4. Pull the starter cord firmly and smoothly until the engine attempts to start (usually 1-3 pulls). Do not pull the cord to its full extension.
5. Once the engine "pops" or attempts to start, move the choke lever to the "RUN" or "OPEN" position.
6. Pull the starter cord again until the engine starts and runs smoothly.
7. Lumella enjene hore e futhumale ka metsotsoana e seng mekae pele e etsa throttle.

5.2 Ho emisa Enjine

To stop the engine, release the throttle trigger and press the engine stop switch to the "OFF" position.

5.3 Using the Attachments

Always ensure the correct attachment is securely fastened before operation.

5.3.1 Trimmer ea likhoele

• Ideal for trimming grass and light weeds around obstacles.
• Tšoara sesebelisoa ka tieo ka matsoho a mabeli.
• Maintain a steady pace, swinging the trimmer head from side to side.
• To advance the line, tap the trimmer head gently on the ground while the engine is running at full throttle.

5.3.2 Sehahi sa borashe

• Use the 4-tooth metal blade for cutting thicker weeds, brush, and small saplings.
• Always wear heavy-duty gloves and leg protection.
• Cut with a sweeping motion, allowing the blade to do the work. Avoid forcing the blade.
• Be aware of kickback, especially when cutting thicker material.

5.3.3 Pole Saw

• Designed for pruning overhead branches.
• Ensure the chain is properly tensioned and lubricated before use.
• Always stand on a stable surface. Do not overreach.
• Make relief cuts to prevent pinching and control the fall of the branch.
• Keep the chain away from the ground to prevent dulling.

5.3.4 Hedge Trimmer

• Use for shaping and trimming hedges and shrubs.
• Inspect the hedge for hidden objects (wires, fences) before cutting.
• Cut with a smooth, even motion. Avoid cutting branches thicker than the blade's capacity.
• Keep the blades clean and sharp for optimal performance.

6. Tlhokomelo

Regular maintenance ensures the longevity and safe operation of your multi-tool. Always ensure the engine is off and cool before performing any maintenance.

6.1 Tlhoekiso ea Sefe ea Moea

• Tlosa sekoahelo sa sefe ea moea.
• Carefully remove the air filter element.
• Clean the filter with warm, soapy water, rinse thoroughly, and allow it to dry completely. For heavily soiled filters, replace with a new one.
• Reinstall the dry air filter and cover.

6.2 Tlhahlobo ea plug ea Spark

• Remove the spark plug cap and then the spark plug using the provided wrench.
• Inspect the spark plug for carbon buildup or damage. Clean with a wire brush or replace if necessary.
• Ensure the electrode gap is correct (refer to specifications).
• Reinstall the spark plug and cap, tightening securely.

6.3 Setlhola sa Mafura

The fuel filter is located inside the fuel tank. Inspect and replace it annually or if fuel delivery issues occur.

6.4 Attachment Maintenance

• String Trimmer: Replace the trimmer line as needed. Refer to the specific instructions for spool replacement.
• Brush Cutter: Keep the metal blade sharp. Sharpen or replace the blade when it becomes dull or damaged.
• Pole Saw: Regularly check chain tension and lubricate the chain with bar and chain oil. Sharpen or replace the chain when dull.
• Hedge Trimmer: Keep blades clean and sharp. Apply a light coat of oil to the blades after each use to prevent rust.

7. Ho rarolla mathata

This section addresses common issues you might encounter with your multi-tool.

If you encounter issues not covered here, or if troubleshooting steps do not resolve the problem, please contact WORX customer support.

8. Lintlha tsa Setegeniki

9. Tiisetso le Tšehetso ea Bareki

For warranty information, please refer to the warranty card included with your product or visit the official WORX website. For technical assistance, spare parts, or any questions regarding your WORX Xceed EX52BC multi-tool, please contact WORX customer support.

Moetsi: SEBELISA

Websebaka: Visit the WORX Store on Amazon

Please have your model number (EX52BC) and purchase date available when contacting support.