Selelekela
This instruction manual provides detailed guidance for the installation, operation, and maintenance of the Juno 6-Inch Incandescent Recessed Light Housing, Model IC22 W G. This housing is specifically designed for new construction applications and is engineered for safety, performance, and energy efficiency.
Lintlha tsa bohlokoa li kenyelletsa:
- IC-Rated: E loketse ho kopana ka ho toba le insulation.
- UL e thathamisitsoe: Certified for damp locations, ensuring safety and reliability.
- Air-Loc Gasket: Integrated gasket reduces air leakage, contributing to energy efficiency.
- Kenyelletso e Bonolo: Features push-in electrical connectors and Real Nail 3 bar hangers for secure mounting.
- Tse ngata-ngata: Accommodates various incandescent lamp types and trim combinations.
Boitsebiso ba Tšireletseho
Always disconnect power at the circuit breaker before installing or servicing the fixture. Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure the housing is properly grounded.
This housing is IC e lekantsoeng, meaning it is safe for direct contact with insulation. It is also UL E thathamisitsoe bakeng sa damp libaka, making it suitable for bathrooms, kitchens, and other areas where moisture may be present.
Ho seta le ho Kenya
The Juno IC22 W G housing is designed for new construction projects and fits ceilings up to 1 inch thick. Follow these general steps for installation:
- Lokisetsa Siling: Ensure the ceiling joists are properly spaced to accommodate the housing's bar hangers. The housing requires a 6-7/8 inch ceiling cutout.
- Mount the Housing: Utilize the Real Nail 3 bar hangers with telescoping arms to securely mount the galvanized steel frame between ceiling joists. The hangers are designed for quick and stable positioning.
- Wiring: The pre-wired junction box includes (5) 1/2 inch and (1) 3/4 inch knockouts. Use the provided push-in electrical connectors to simplify wiring connections. Ensure all connections are secure and comply with electrical codes.
- Install Socket and Trim: The housing features an adjustable socket plate and a detachable medium base porcelain socket with snap-in springs. This allows for accommodation of various lamp and trim combinations. Install the desired incandescent bulb and compatible Juno 6-inch baffle trim (sold separately).
Litaelo tsa Ts'ebetso
The Juno IC22 W G is a housing unit designed to hold an incandescent light bulb and a compatible trim. Its operation is dependent on the installed bulb and the electrical circuit it is connected to.
- Tšebelisano ea Bulb: This housing accepts incandescent lamp types including A19, BR30, BR40, R20, PAR16, PAR20, and PAR30. Ensure the wattage of the chosen bulb does not exceed the maximum rating of the fixture (90 watts).
- Taolo ea Matla: The light will operate via the wall switch or control method connected to its electrical circuit.
Tlhokomelo
Regular maintenance ensures optimal performance and longevity of your recessed light housing.
- Ho hloekisa: Periodically clean the trim and bulb with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Phetoho ea Bulb: Always disconnect power before replacing a bulb. Allow the old bulb to cool completely before removal. Insert the new bulb securely into the medium base porcelain socket, ensuring it is of a compatible type and wattage.
- Tlhahlobo: Annually inspect the housing and wiring for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.
Ho batle phoso
If you encounter issues with your Juno recessed light housing, consider the following common troubleshooting steps:
- Leseli le sa Tumiseng:
- Hlahloba sethibela-maqhubu sa potoloho ho netefatsa hore motlakase o filoe sesebelisoa.
- Verify the light bulb is correctly installed and not burnt out. Try replacing it with a known working bulb.
- Netefatsa hore switch ea lebota e boemong ba 'ON'.
- Leseli le Benyang:
- Confirm the bulb is fully screwed into the socket.
- Check for loose wiring connections in the junction box (ensure power is off before inspecting).
- Netefatsa hore tleloubu e oattage is compatible with the fixture and any dimmer switches used.
- Ho chesa haholo:
- Etsa bonnete ba hore bulb e nepahetsetage is used and does not exceed the fixture's maximum rating.
- Verify that the IC-rated housing is not compromised and insulation is not directly touching non-IC rated parts (if applicable, though this model is IC-rated).
For persistent electrical issues or if you are unsure about any troubleshooting steps, consult a qualified electrician.
Litlhaloso
| Tšobotsi | Lintlha |
|---|---|
| Nomoro ea Mohlala | IC22 W G |
| Boholo | 6 inch |
| Mofuta oa Tlhophiso | New Construction, Recessed |
| Lintho tse bonahalang | Galvanized Steel Frame, Copper (internal components) |
| Litekanyo (Sehlahisoa) | 14"L x 14"W x 8"H (overall with hangers) |
| Siling Cucut | 6-7/8 lisenthimithara |
| Botenya ba siling | Up to 1 inch |
| Mofuta oa Mohloli oa Leseli | Sehlahisoa sa incandescent |
| Motheo oa Bulb | E26 E mahareng |
| Boholo Wattage | 90 watts |
| Moqtage | Li-volts tse 120 |
| Setifikeiti | UL Listed, CSA, IC-Rated, Damp Sebaka |
| Boima ba 'mele | 2.5 liponto |
| Kenyellelitsoe Likaroloana | Matlo |
Warranty le Tšehetso
The Juno 6 Inch Incandescent Recessed Light Housing (Model IC22 W G) comes with a Tiisetso e lekantsoeng ea selemo se le seng. Please note that using trim kits from other brands may void the warranty.
For technical assistance, warranty claims, or further information, please contact Juno customer support. Refer to the official Juno websephuthelo sa sebaka kapa sehlahisoa bakeng sa lintlha tsa hajoale tsa ho ikopanya.
