IKEA BlaviK LED Wall Lamp ka Mirror User Manual

1. Selelekela

This manual provides essential information for the safe and efficient use of your IKEA BlaviK LED wall lamp with mirror. Please read these instructions carefully before installation and use, and retain them for future reference.

The IKEA BlaviK is a battery-operated LED wall lamp featuring an integrated magnifying mirror, designed for use in humid environments such as bathrooms. It offers adjustable lighting and an automatic shut-off function for energy saving.

2. Boitsebiso ba Tšireletseho

• Tšireletseho ea Battery: Always use the correct type and size of batteries (3 x HR6/AA). Ensure batteries are inserted with correct polarity (+ and -). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
• Tikoloho: This product is tested and approved for use in humid environments (IP44 rated), such as bathrooms. However, avoid direct water spray onto the lamp.
• Mohloli oa Leseli la LED: The LED light sources in this product are non-replaceable. Do not attempt to open or modify the lamp.
• Ho hlongoa: Ensure the wall surface is suitable for mounting and can support the weight of the lamp. Use appropriate screws and wall plugs for your wall type (screws are not included).

3. Likahare tsa Sephutheloana

Netefatsa hore likarolo tsohle li teng pele u tsoela pele ka ho kenya:

• IKEA BlaviK LED Wall Lamp unit with integrated mirror
• Buka ea litaelo (tokomane ena)

Hlokomela: Wall mounting screws and batteries (3 x HR6/AA) are not included and must be purchased separately. IKEA recommends LADDA rechargeable batteries.

4. Ho seta le ho kenya

4.1. Kenyelletso ea Battery

1. Locate the battery compartment on the lamp unit.
2. Bula sekwahelo sa karolo ya betri.
3. Insert 3 x HR6/AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

4.2. Wall ntseng bo eketseha

1. Choose a suitable location on the wall, ensuring it is clean and dry.
2. Mark the desired mounting points on the wall.
3. Drill holes if necessary and insert appropriate wall plugs (not included).
4. Sireletsa lamp to the wall using suitable screws (not included). Ensure the lamp is firmly attached and stable.

This image displays the IKEA BlaviK LED wall lamp, highlighting its compact design, white casing, and the flexible arm that allows for light direction adjustment. The integrated mirror is visible on the lamp's face.

5. Litaelo tsa Ts'ebetso

• Tlosa/Tima: Lamp can be switched on and off manually using the integrated switch.
• Ho Koala ka Motlakase: For energy saving, the lamp features a 15-minute automatic shut-off function.
• Khanya ea Tokiso: The flexible arm allows you to adjust the direction of the light as needed, providing targeted illumination.
• Magnifying Seipone: Utilize the integrated magnifying mirror for tasks such as shaving or applying makeup.

6. Tlhokomelo

To ensure the longevity and optimal performance of your IKEA BlaviK lamp, follow these cleaning instructions:

• Hlakola lamp bokaholimo bo nang le papatsoamp lesela.
• For more thorough cleaning, use a mild detergent on the damp lesela.
• After cleaning, dry the lamp ka botlalo ka lesela le hloekileng, le omeletseng.
• Do not use abrasive cleaners or solvents, as these can damage the product's finish.

7. Ho rarolla mathata

• Lamp ha e khantše:
  • Hlahloba hore na libeteri li kentsoe ka nepo ka polarity e nepahetseng.
  • Ensure the batteries are not exhausted; replace or recharge them if necessary.
  • Verify the manual switch is in the 'ON' position.
• Leseli le lerootho:
  • The batteries may be low. Replace or recharge them.
• Ho koala ka bohona ha ho sebetse:
  • Etsa bonnete ba hore lamp is not being manually overridden.
  • Check battery levels, as low batteries might affect timer functions.

8. Litlhaloso

9. Tiisetso le Tšehetso

For information regarding warranty, returns, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.