1. Sehlahisoa Overview
The Gerber Danze DA507348N is a ceramic disc cartridge designed as a replacement part for various Danze single-handle faucets. This component is crucial for controlling water flow and temperature in compatible faucet models, restoring proper function and preventing leaks.
Image 1: The Gerber Danze DA507348N Ceramic Disc Cartridge. This image displays the blue and white ceramic disc cartridge with its stem, ready for installation into a compatible single-handle faucet.
2. Litlhaloso
- Nomoro ea Mohlala: DA507348N
- Mofuta: Ceramic Disc khatriche
- Tšebelisano: Designed for Danze single-handle faucets
- Boitsebiso: Ceramic, Plastiki
- Boholo: Hoo e ka bang 2.25 x 1.25 x 1.25 inches
- Boima ba Ntho: Hoo e ka bang li-ounces tse 1.45
- E nkela sebaka: Danze model DA507048N
3. Compatible Faucet Models
This ceramic disc cartridge is compatible with the following Danze single-handle faucet models:
- D153244, D155040, D201014, D201244, D203112
- D215158, D216454, D216540, D220111, D221040
- D222158, D223140, D223544, D403412, D403512
- D403612, D403712, D403812, D404214, D404444
- D404458, D404854, D405040, D455612, D457015
It also serves as a replacement for the older Danze model DA507048N.
4. Litaelo tsa ho kenya
Follow these steps to replace the ceramic disc cartridge in your Danze single-handle faucet. It is recommended to consult your specific faucet's manual for detailed disassembly instructions, as designs may vary.
4.1. Pele O Qala
- Tima Phepelo ea Metsi: Locate the hot and cold water shut-off valves under the sink and turn them clockwise until fully closed. Open the faucet handle to relieve any remaining water pressure.
- Bokella Lisebelisoa: You may need a flathead screwdriver, Phillips head screwdriver, Allen (hex) wrench (often 2.5mm), channel lock pliers, and plumber's grease.
4.2. Removing the Old Cartridge
- Tlosa Mohele oa Faucet: Typically, there is a small decorative cap or plug on the handle that conceals a set screw. Carefully pry off the cap and use the appropriate screwdriver or Allen wrench to loosen the set screw. Once loose, pull the handle straight up and off.
- Access the Cartridge: Remove any decorative trim rings or covers to expose the cartridge housing.
- Remove Locking Collar/Nut: The cartridge is usually secured by a threaded collar or nut. This may require channel lock pliers. Turn it counter-clockwise to loosen and remove. Be careful not to damage the threads.
- K'hatriji ea Khale e Ntšoang: Carefully pull the old cartridge straight out. Note its orientation for reference.
- Hlahloba O-Rings: Ensure that all old O-rings (often three connected in a 'Mickey Mouse ears' shape) are removed from the faucet body. If they remain, the new cartridge will not fit correctly. Clean any grit or mineral buildup from the cartridge housing.
4.3. Installing the New Cartridge
- Lubricate (Optional): Apply a small amount of plumber's grease to the O-rings on the new cartridge for easier installation and better sealing.
- Kenya khatriji e Ncha: Align the new DA507348N cartridge with the faucet body, ensuring it is seated correctly. Push it firmly into place.
- Secure Locking Collar/Nut: Reinstall the locking collar or nut, turning it clockwise to tighten. Do not overtighten, but ensure it is snug.
- Reassemble Faucet: Replace any decorative trim rings and then the faucet handle. Tighten the set screw to secure the handle.
- Tsosolosa Phepelo ea Metsi: Slowly turn the hot and cold water shut-off valves back on.
- Teko ea Faucet: Check for leaks and verify proper water flow and temperature control.
Image 2: Genuine Gerber Replacement Parts. This logo signifies the authenticity and quality of Gerber replacement components, ensuring optimal product performance.
5. Tlhokomelo
Proper maintenance can extend the life of your faucet and cartridge.
- Ho Hloekisa Kamehla: Periodically clean faucet components, including the cartridge housing, to prevent mineral buildup. Products like CLR (Calcium, Lime, Rust remover) can be used for this purpose.
- Lubrication: If the handle operation becomes stiff, disassemble the handle and cartridge, clean the components, and apply fresh plumber's grease to the O-rings and moving parts of the cartridge.
- Mariha: In outdoor faucet applications, ensure the water supply is completely shut off and the faucet is drained during winter months to prevent O-ring damage from freezing.
6. Ho rarolla mathata
| Hlahisa | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Faucet Leaks After Cartridge Replacement |
|
|
| No Hot Water (or inconsistent temperature) |
|
|
| Stiff Faucet Handle Operation |
|
|
7. Boitsebiso ba Tiisetso
Gerber products, including this ceramic disc cartridge, are typically backed by a limited lifetime warranty against manufacturing defects. For specific terms and conditions, please refer to the warranty documentation provided with your original Danze faucet or contact Gerber customer support.
8. Tšehetso ea Bareki
For technical assistance, installation questions, or warranty claims, please contact Gerber customer support. Contact information can typically be found on the official Gerber websaeteng kapa litokomaneng tse kenyellelitsoeng sehlahisoa sa hau.
You can also visit the official Gerber websaete bakeng sa lintlha tse ling: Gerber Store on Amazon
