Imetec Hi-Man Expert GK3 900

IMETEC Hi-Man Expert GK3 900 Multi-Groomer

Buka ea Tataiso

1. Selelekela

Thank you for choosing the IMETEC Hi-Man Expert GK3 900 Multi-Groomer. This versatile 8-in-1 grooming kit is designed for precise and efficient personal care, offering solutions for beard trimming, hair cutting, and body grooming. Featuring professional blades and a waterproof design, it ensures excellent results and easy maintenance. Please read this manual carefully before first use to ensure safe and optimal operation of your device.

2. Litaelo tsa Tšireletso

Always observe the following safety precautions to reduce the risk of electric shock, injury, or fire:

3. Likarolo tsa Sehlahisoa

Your IMETEC Hi-Man Expert GK3 900 Multi-Groomer comes with a comprehensive set of accessories for various grooming needs:

IMETEC Hi-Man Expert GK3 900 Multi-Groomer with various attachments and combs

Image: The IMETEC Hi-Man Expert GK3 900 multi-groomer unit displayed with its interchangeable heads and adjustable combs, illustrating the complete 8-in-1 kit.

4. Ho tjhaja Sesebelisoa

The IMETEC Hi-Man Expert GK3 900 can operate both corded and cordless, thanks to its rechargeable battery. Before first use, fully charge the device for approximately 8-10 hours.

  1. Ensure the device is switched OFF.
  2. Place the main grooming unit onto the rechargeable base.
  3. Connect the power adapter to the rechargeable base and then plug it into a suitable electrical outlet.
  4. The charging indicator light (if present) will illuminate.
  5. Hang ha e tjhajilwe ka botlalo, tima adaptara ya motlakase.

For optimal battery life, avoid overcharging and allow the battery to fully discharge occasionally before recharging.

5. Setup and Attachment Installation

To change or install an attachment head:

  1. Ensure the device is switched OFF.
  2. To remove a head, gently push it upwards from the main unit until it detaches.
  3. To attach a head, align it with the grooves on the main unit and push downwards until it clicks securely into place.

To use the adjustable combs:

IMETEC Hi-Man Expert GK3 900 Multi-Groomer main unit

Image: The main grooming unit of the IMETEC Hi-Man Expert GK3 900, ready for attachment of various heads.

6. Litaelo tsa Ts'ebetso

Before operating, ensure the desired attachment and comb (if needed) are securely installed.

Ts'ebetso e akaretsang:

Tšebeliso e khethehileng:

Man with a well-groomed beard, demonstrating the results achievable with the multi-groomer

Image: A man showcasing a neatly groomed beard, illustrating the precision and versatility of the IMETEC Hi-Man Expert GK3 900 multi-groomer for facial hair styling.

7. Tlhokomelo le Tlhoekiso

Regular cleaning ensures optimal performance and extends the life of your multi-groomer. The heads are washable for easy cleaning.

  1. Ka mor'a Tšebeliso e 'ngoe le e' ngoe: Turn off the device and remove the attachment head. Use the supplied cleaning brush to remove any loose hairs from the blades and the device body.
  2. Washing Heads: The attachment heads are waterproof. Rinse them under running water. Ensure they are completely dry before reattaching or storing.
  3. Lubrication: Periodically apply a small drop of the supplied lubricating oil to the blades to maintain their sharpness and smooth operation. Turn on the device for a few seconds to distribute the oil.
  4. Polokelo: Store the device and all accessories in the provided storage stand or a dry, safe place, away from children.
IMETEC Hi-Man Expert GK3 900 Multi-Groomer being rinsed under running water

Image: The IMETEC Hi-Man Expert GK3 900 multi-groomer being cleaned under running water, highlighting its waterproof design and ease of maintenance.

8. Ho rarolla mathata

BothataLebaka le ka khonehangTharollo
Sesebelisoa ha se bulele.Battery is discharged or not properly charged.Charge the device fully. Ensure the power adapter is correctly connected.
Ho seta moriri hantle kapa ho hula moriri hampe.Blades are dull, dirty, or not lubricated. Hair buildup.Clean the blades thoroughly. Apply lubricating oil. Replace blades if excessively dull.
Sesebelisoa se ema nakong ea tšebeliso.Battery is low. Overheating.Recharge the device. Allow the device to cool down before resuming use.
Attachments do not fit securely.Incorrect alignment or debris.Ensure the attachment is correctly aligned with the grooves and push firmly until it clicks. Clean any debris from the connection points.

9. Litlhaloso

10. Tiisetso le Tšehetso

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, spare parts, or any inquiries regarding your IMETEC Hi-Man Expert GK3 900, please contact your local retailer or visit the official Imetec website for customer service information. Keep your proof of purchase for warranty claims.

Ho fumana lintlha tse ling, etela Imetec Store.

Litokomane tse Amanang - Hi-Man Expert GK3 900

Peleview IMETEC Q8602 Piastra per Capelli - Manuale d'Uso
Manuale d'uso completo per la piastra per capelli IMETEC Q8602, con istruzioni dettagliate su sicurezza, utilizzo, manutenzione e garanzia.
Peleview IMETEC ASCIUGACAPELLI P5401/P5407 - Manuale di Istruzioni
Manuale di istruzioni per l'asciugacapelli IMETEC ASCIUGACAPELLI modelli P5401 e P5407. Tlhahisoleseding e mabapi le ho sicurezza, ho sebelisa, ho etsa lintho tse itseng le garanzia.
Peleview IMETEC MULISTTYLER Mofuta oa C7003: Manuale d'uso e istruzioni
Scopri come utilizzare al meglio il tuo IMETEC MULISTTYLER Mofuta oa C7003 con il manuale d'uso completo. Istruzioni dettaglite per uno styling perfetto e sicuro dei capelli.
Peleview Istruzioni per l'uso Termoventilatore IMETEC TYPE S0201
Manuale di istruzioni completo per il termoventilatore IMETEC TYPE S0201, con dettagli su sicurezza, utilizzo, manutenzione, risoluzione problemi e garanzia, conforme alla norma europea EN 82079.
Peleview IMETEC Scaldaletto: Manuale d'Uso e Sicurezza
Manuale completo per lo scaldaletto IMETEC, che kenyeletsa istruzioni dettagliate per l'uso, la sicurezza, la pulizia, la manutenzione e la risoluzione dei problemi. Copre i modelli R1502, R1503, R1505, R1506, R1508, R1511.
Peleview IMETEC Sistema Stirante S3901: Guida Completa all'Uso e alla Sicurezza
Scopri tla utilizzare al meglio il tuo IMETEC Sistema Stirante S3901. Questa Guida completa fornisce istruzioni dettaglite, consigli sulla sicurezza e manutenzione per un'esperienza di stiratura ottimile.