1. Selelekela
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Nuvo SF76/502 Outdoor Security Flood Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for outdoor use to provide security lighting with motion detection capabilities.
Litaba tsa Sephutheloana:
- Nuvo SF76/502 Flood Light Fixture
- Lisebelisoa tsa ho Kenya (lisekere, linate tsa terata)
- Bukana ea Mosebelisi
Figure 1: Nuvo SF76/502 Outdoor Security Flood Light with two adjustable lamp heads and a central motion sensor.
2. Boitsebiso ba Tšireletseho
WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Always turn off the main power supply before attempting any electrical installation or maintenance.
- Ho kenya ho lokela ho etsoa ke setsebi sa motlakase se tšoanelehang kapa ho latela melao ea motlakase ea lehae.
- Ensure the product is properly grounded to avoid potential electric shock.
- Do not install on surfaces that are unstable or cannot support the weight of the fixture.
- Use only PAR38 bulbs as specified. Do not exceed the maximum wattage ea 150 watts ka tleloubu.
- This fixture is rated for wet locations, but ensure all connections are sealed properly to prevent water intrusion.
- Keep flammable materials away from the light fixture during operation.
- Do not look directly into the light source when illuminated.
3. Ho kenya
Follow these steps for proper installation of your security flood light.
3.1 Lisebelisoa li Hlokahala
- Screwdriver (Phillips le Flathead)
- Li-Strippers tsa Mohala
- Pliers
- Theipi ea Motlakase
- Lere (haeba e kenngoa ka bophahamo)
- Moqtage Mohlahlobi
3.2 Ho Hlophisa Sebopeho
- Tima Matla: Locate the circuit breaker controlling the outdoor lighting circuit and turn it OFF. Verify power is off using a voltagmohlahlobi.
- Lokisa Wiring: If replacing an existing fixture, carefully remove it. Pull the electrical wires from the junction box.
- Hokela Mounting Plate: Secure the fixture's mounting plate to the junction box using the provided screws. Ensure it is flush and stable.
- Lihokelo tsa Mohala:
- Connect the ntsho terata ho tloha sesebelisoa ho ea ho ntsho terata (e chesang) e tsoang lebokoseng la ho kopanya.
- Connect the tšoeu terata ho tloha sesebelisoa ho ea ho tšoeu terata (e sa nke lehlakore) e tswang lebokoseng la kgokelo.
- Connect the botala or bare copper ground wire from the fixture to the house ground wire.
- Sireletsa likhokahano tsohle ka linate tsa terata le teipi ea motlakase.
- 'Mele oa Thapo ea Thapo: Carefully tuck the wires into the junction box. Align the fixture body with the mounting plate and secure it with the provided screws. Ensure a tight seal to prevent moisture entry.
3.3 Bulb Installation
- Ensure power is still OFF.
- Screw two PAR38 bulbs (not included) into the lamp holders. Do not overtighten.
- Fetola tsela ea lamp heads as desired.
Figure 2: Approximate dimensions of the Nuvo SF76/502 flood light, showing a height of 15 inches (36 cm) for reference during installation.
4. Ts'ebetso le Litlhophiso
After installation, restore power at the circuit breaker. The flood light is equipped with a motion sensor and adjustable settings.
4.1 Phetoho ea Sensor ea Motion
The motion sensor typically has controls for SENSITIVITY, TIME, and LUX (daylight sensor). These are usually small dials located on the sensor unit.
- BOITSEBISO: Adjusts the detection range of the motion sensor. Turn clockwise for a wider range, counter-clockwise for a narrower range. Test different settings to find the optimal detection area.
- NAKO: Controls how long the light stays on after motion is detected. Turn clockwise to increase the duration, counter-clockwise to decrease it (e.g., from a few seconds to several minutes).
- LUX (Daylight Sensor): Determines the ambient light level at which the sensor becomes active.
- Beha ho "Sun" icon for day and night operation (light will activate with motion regardless of ambient light).
- Beha ho "Moon" icon for night-only operation (light will only activate with motion when it's dark).
Note: Allow a few minutes for the sensor to calibrate after power is restored or settings are changed.
5. Tlhokomelo
Regular maintenance ensures optimal performance and longevity of your flood light.
- Ho hloekisa: Nako le nako hloekisa sesebelisoa ka bonolo, damp cloth. Do not use abrasive cleaners or solvents. Ensure the motion sensor lens is clear of dirt and debris for proper function.
- Phetoho ea Bulb:
- Tima motlakase ho sekhechana sa potoloho.
- Lumella li-bulbs hore li pholile ka ho feletseng pele u tšoara.
- Carefully unscrew the old PAR38 bulb.
- Screw in a new PAR38 bulb (max 150W).
- Khutlisa matla.
- Tlhahlobo: Annually inspect wiring and mounting for any signs of wear, damage, or loosening.
6. Ho rarolla mathata
If your flood light is not functioning as expected, refer to the following common issues and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Leseli ha le khanye. |
|
|
| Lesedi le dula le le teng. |
|
|
| Leseli le chanya le ho tima. |
|
|
| Motion sensor range is too short/long. |
|
|
7. Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Brand | Nuvo |
| Nomoro ea Mohlala | SF76/502 |
| Mmala | Bosoeu |
| Lintho tse bonahalang | Khalase, Tšepe |
| Setaele | Bula |
| Foromo ea ho Lokisa Leseli | Thaba ea Lerako |
| Tšebeliso ea Ka hare/Kantle | Kantle |
| Mohloli oa Matla | Motlakase oa Corded |
| Mofuta oa Tlhophiso | Thaba e kaholimo |
| Tšobotsi e Khethehileng | Motion Sensor, Base Medium, Voltage 120, Wattage 150 |
| Mofuta oa Mohloli oa Leseli | Halogen (PAR38 recommended) |
| Palo ea Mehloli ea Leseli | 2 |
| Moqtage | Li-volts tse 120 |
| Wattage (Max per bulb) | 150 watts |
| Motheo oa Bulb | E26 E mahareng |
| Boemo ba ho hanyetsa Metsi | Ha e Kene Metsi (Sebaka se Metsi se Lekantsoe) |
| Litekanyo tsa Sehlahisoa | 10"L x 9.5"W x 4.75"H |
| Boima ba Ntho | 0.01 Lionsi (Note: This weight from source data may be inaccurate for a flood light fixture) |
| Setifikeiti | UL e thathamisitsoe |
8. Tiisetso le Tšehetso
This Nuvo SF76/502 flood light comes with a Tiisetso e lekantsoeng ea selemo se le seng ho tloha ka letsatsi la theko. Tiisetso ena e koahela mefokolo ea thepa le moetso tlas'a tšebeliso e tloaelehileng.
For warranty claims, technical support, or replacement parts, please contact Nuvo customer service. Keep your purchase receipt as proof of purchase.
Bohlokoa: Any unauthorized modification or improper installation will void the warranty.
