Selelekela
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your shift 3 Bluetooth Hands-Free Auto Speaker Black Series. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Image: The shift 3 Bluetooth Hands-Free Auto Speaker, a compact black device with a metallic trim, featuring a speaker grille, control buttons, and a clip for attachment. This image shows the front view ya sebui.
Tlhophiso
1. Ho tjhaja Sesebelisoa
The shift 3 speaker is powered by an internal battery. Before first use, fully charge the device using the provided power adapter. Connect the power adapter to the speaker's charging port and plug it into a standard wall outlet. The charging indicator light will typically show the charging status and turn off or change color when fully charged.
2. Ho Bea ha Pele
As a tabletop mount device, place the speaker on a stable, flat surface. For in-car use, utilize its design for convenient placement, ensuring it does not obstruct your view kapa ho kena-kenana le ditaolo tsa ho kganna.
3. Bluetooth pairing
- Netefatsa hore sepikara se tjhajilwe mme se buletswe.
- Kenya tšebetsong Bluetooth ho smartphone, tablet, kapa sesebelisoa se seng se sebetsang.
- Put the shift 3 speaker into pairing mode. This usually involves pressing and holding the Bluetooth button or power button until an indicator light flashes rapidly or a voice prompt confirms "pairing mode."
- On your device, search for available Bluetooth devices. Select "shift 3" or a similar name from the list.
- Once connected, the speaker will typically provide an audible confirmation, and the indicator light will change to a steady blue.
Note: If prompted for a passcode, enter "0000" (four zeros).
Litaelo tsa Ts'ebetso
Motlakase/O tima
- To turn on: Press and hold the power button until the indicator light illuminates.
- To turn off: Press and hold the power button until the indicator light turns off.
Ho Letsa Matsoho
- Ho Arabela Pitso: When a call comes in, press the multi-function button (often marked with a phone icon) once to answer.
- Ho Felisa Mohala: Nakong ea mohala, tobetsa konopo ea mesebetsi e mengata hang ho emisa mohala.
- Ho hana mohala: Tobetsa o be o tshware konopo ya mesebetsi e mengata ka metsotswana e ka bang 2 ho hana mohala o kenang.
- Redialing Last Number: Double-press the multi-function button to redial the last number called.
- Taolo ea Lentsoe: If supported by your connected device, you may activate voice assistants (e.g., Siri, Google Assistant) by pressing and holding a dedicated voice control button or the multi-function button.
Audio Playback
- Bapala/Emisa: Press the multi-function button once to play or pause audio.
- Taolo ea Bolumo: Use the volume up (+) and volume down (-) buttons on the speaker to adjust the audio level.
- Pina e latelang / e fetileng: Some models may have dedicated buttons or require a long press of the volume buttons to skip tracks. Refer to your device's specific button layout.
Tlhokomelo
Ho hloekisa
Wipe the exterior of the speaker with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid getting moisture into any openings.
Tlhokomelo ea Battery
- Ho boloka bophelo ba betri, qoba ho ntsha betri ka botlalo kgafetsa.
- Boloka sesebelisoa sebakeng se phodileng, se omeletseng ha se sa sebelisoe nako e telele.
- Recharge the battery at least once every three months if not used regularly.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Sesebelisoa ha se bulele. | Betri e felile. | Charge the device using the provided power adapter. |
| Ha e khone ho hokahanya le sesebelisoa sa Bluetooth. | Speaker not in pairing mode; Bluetooth on source device is off or too far; previously paired device interfering. | Ensure speaker is in pairing mode. Turn Bluetooth off and on again on your source device. Move devices closer. Disconnect from other Bluetooth devices. |
| Poor audio quality during calls (squealing/whining). | Interference; microphone issues; device malfunction. | Move away from other electronic devices. Ensure speaker is positioned correctly. If problem persists, contact customer support. |
| Ha ho molumo o tsoang ho sebui. | Volume too low; device not connected; audio source paused. | Increase volume on both speaker and connected device. Verify Bluetooth connection. Check if audio is playing on the source device. |
Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Lebitso la Mohlala | shift 3 |
| Ntho Nomoro ea Mohlala | 4326596135 |
| Brand | bluetooth |
| Mofuta oa Sebui | Ho pota-pota Modumo |
| Tšobotsi e Khethehileng | E sa sebeliseng matsoho |
| Lisebelisoa tse lumellanang | Projector, Laptop, MP3 Player, Desktop, Television, Tablet, Smartphone |
| Mofuta oa Molaoli | Konopo |
| Potoloho ea Mohala oa Molumo o Potileng | 3.0 |
| Mmala | Ntsho |
| Kenyellelitsoe Likaroloana | Power adapter, User manual |
| Ha e na Metsi | LESHANO |
| Mofuta oa Warranty | Moedi |
| Mokhoa oa ho Laola | Lentsoe |
| Theknoloji ea puisano e se nang mohala | bluetooth |
| Mohloli oa Matla | Matla a Battery |
| Mofuta oa Mokhanni oa Audio | Mokhanni ea Matla |
| Khokahano Protocol | bluetooth |
| UPC | 694202203835 |
| Moetsi | bluetooth |
| Litekanyo tsa sephutheloana | 10.3 x 8.8 x 2.5 lisenthimithara |
| Boima ba Ntho | 10.4 lik'hilograma |
| ASIN | B002SDA1BA |
| Letsatsi le Fumanang Pele | La 27 Pulungoana 2009 |
| Theknoloji ea Khokahano | bluetooth |
| Mokhoa oa Phatlalatso ea Audio | Setereo |
| Mofuta oa ho Beha | Thaba ea Letlapa |
Warranty le Tšehetso
The shift 3 Bluetooth Hands-Free Auto Speaker comes with a Tiisetso e Lekanyelitsoeng. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting beyond this manual, or warranty claims, please contact the manufacturer, Bluetooth, through their official support channels. This product includes a user manual as part of its components.
