ARTERYTEK AT-START-F415 32 Bit Microcontroller
Sehlahisoa se Felletseview
AT-START-F415 ke boto ea tlhahlobo e thehiloeng ho chip ea AT*32F415RCT7-7. E na le matšoao a LED, likonopo, sehokelo sa USB micro-B, sehokelo sa mofuta oa A, le sehokelo sa ArduinoTM Uno R3. Boto ena e kenyelletsa sesebelisoa sa ho lokisa / ho hlophisa AT-LINK-EZ, ho felisa tlhoko ea lisebelisoa tse ling tsa ntlafatso.
Qala ka Potlako
Ho qala ka AT-START-F415:
- Kopanya motlakase o hlokahalang.
- Khetha sesebelisoa se loketseng se tšehetsang AT-START-F415.
Hardware le Sebopeho
AT-START-F415 e fana ka likarolo tse latelang tsa hardware:
- Khetho ea Phepelo ea Matla
- Boto e tšehetsa likhetho tse fapaneng tsa phepelo ea motlakase.
Selelekela
AT-START-F415 e etselitsoe ho u thusa ho hlahloba likarolo tse phahameng tsa ts'ebetso ea 32-bit microcontroller, AT32F415 e kentsoeng ka ARM Cortex®-M4 core, le ho thusa ho ntlafatsa lits'ebetso tsa hau. AT-START-F415 ke boto ea tlhahlobo e thehiloeng ho chip ea AT32F415RCT7-7 e nang le matšoao a LED, likonopo, sehokelo sa USB sa micro-B, sehokelo sa mofuta oa A le sehokelo sa Arduino TM Uno R3. Boto ena ea tlhahlobo e kenyelletsa sesebelisoa sa ho lokisa/programa AT-Link-EZ ntle le tlhoko ea lisebelisoa tse ling tsa ntlafatso.
Fetileview
Likaroloana
AT-START-F415 e na le litšobotsi tse latelang:
- AT-START-F415 e na le microcontroller e holim'a board ea AT32F415RCT7-7 e kenyang ARM Cortex®-M4, 32-bit processor, 256 KB Flash memory le 32 KB SRAM, LQFP64 7×7 mm liphutheloana.
- Sehokelo sa AT-Link se ka botong:
- AT-Link-EZ e ka har'a board e ka sebelisoa bakeng sa ho etsa mananeo le ho lokisa liphoso (AT-Link-EZ ke mofuta o nolofalitsoeng oa AT-Link, 'me ha e tšehetse mokhoa oa offline)
- Haeba AT-Link-EZ e arohane le boto ena ka ho inamela haufi le lenonyeletso, AT-START-F415 e ka hokela ho AT-Link e ikemetseng bakeng sa ho etsa mananeo le ho lokisa liphoso.
- Ka har'a board 20-pin ARM standard JTAG sehokelo (se nang le JTAG/ sehokelo sa SWD bakeng sa ho hlophisa / ho lokisa liphoso)
- Mekhoa e fapaneng ea ho fana ka motlakase:
- Ka bese ea USB ea AT-Link-EZ
- Ka bese ea USB OTG (VBUS) ea AT-START-F415
- Matla a kantle a 7~12 V (VIN)
- Matla a kantle a 5 V (E5V)
- Matla a kantle a 3.3 V
- 4 x matšoao a LED:
- LED1 (e khubelu) e sebelisetsoang motlakase oa 3.3 V
- 3 x USER LED, LED2 (khubelu),LED3 (e tšoeu) le LED4 (e tala)
- 2 x likonopo (konopo ea mosebelisi le konopo ea reset)
- 8 MHz HSE kristale
- 32.768 kHz LSE kristale
- Sehokelo sa USB se ka har'a board sa A le sehokelo sa micro-B bakeng sa ts'ebetso ea USB OTG
- Lihokelo tse fapaneng tsa katoloso li ka hokahana kapele ho boto ea prototype mme ho bonolo ho e hlahloba:
- Sehokelo sa katoloso ea ArduinoTM Uno R3
- Sehokelo sa katoloso ea koung ea LQFP64 I/O
Tlhaloso ea mantsoe
- Jumper JPx ON
- Jumper e kentsoe.
- Jumper JPx OFF
- E tlole ha ea kengoa.
- Mohanyetsi Rx ON
- Ka bokhutšoanyane ka solder kapa 0Ω resistor.
- Mohanyetsi Rx OFF
- Bula.
Ho qala ka potlako
Qala
Lokisa boto ea AT-START-F415 ka tatellano e latelang ho qala ts'ebeliso:
- Sheba boemo ba Jumper botong:
- JP1 e amana le GND kapa OFF (BOOT0 pin ke 0, 'me BOOT0 e na le mochine oa ho hula fatše ho AT32F415RCT7-7);
- JP4 ea boikhethelo kapa OFF (BOOT1 e boemong bofe kapa bofe);
- JP6 le JP7 khetha IO e ka holimo.
- Hokela boto ea AT-START-F415 ho PC ka thapo ea USB (Mofuta oa A ho isa ho micro-B), 'me boto e tla tsamaisoa ka sehokelo sa USB sa AT-Link-EZ CN6. LED1 (e khubelu) e lula e le teng, 'me li-LED tse ling tse tharo (LED2 ho ea ho LED4) li qala ho panya ka ho latellana.
- Kamora ho tobetsa konopo ea mosebelisi (B2), maqhubu a ho panya ha li-LED tse tharo a fetoloa.
Lisebelisoa tse tšehetsang AT-START-F415
- ARM® Keil®: MDK-ARM™
- IAR™: EWARM
Hardware le moralo
- Boto ea AT-START-F415 e entsoe ho potoloha microcontroller ea AT32F415RCT7-7 ho LQFP64 7 × 7 mm sephutheloana.
- Setšoantšo sa 1 se bonts'a likhokahano lipakeng tsa AT-Link-EZ, AT32F415RCT7-7 le li-peripherals tsa tsona (li-button, li-LED, USB OTG le lihokelo tse atolositsoeng)
- Setšoantšo sa 2 le Setšoantšo sa 3 se bontša likarolo tsena ho AT-Link-EZ le AT-START-F415 boto.
Khetho ea phepelo ea motlakase
Matla a 5 V a AT-START-F415 a ka fanoa ka thapo ea USB (ebang ke ka sehokelo sa USB CN6 ho AT-Link-EZ kapa sehokelo sa USB OTG CN5 ho AT-START-F415), kapa ka sehokelo sa kantle. Matla a 5 V (E5V), kapa ka matla a kantle a 7 ~ 12 V (VIN) ka 5V vol.tage regulator (U1) ka boto. Tabeng ena, matla a 5 V a fana ka matla a 3.3 V a hlokoang ke li-microcontroller le li-peripherals ka matla a 3.3 V.tage regulator (U2) ka boto. Pini ea 5 V ea J4 kapa J7 e ka boela ea sebelisoa e le mohloli oa matla a ho kenya. Boto ea AT-START-F415 e tlameha ho tsamaisoa ke yuniti ea phepelo ea matla a 5 V. Pini ea 3.3 V ea J4 kapa phini ea VDD ea J1 le J2 le eona e ka sebelisoa ka kotloloho e le phepelo ea motlakase ea 3.3 V. Boto ea AT-START-F415 e tlameha ho tsamaisoa ke yuniti ea phepelo ea motlakase ea 3.3 V.
Hlokomela
- Ntle le haeba 5 V e fanoa ka sehokelo sa USB (CN6) ho AT-Link-EZ, AT-Link-EZ e ke ke ea tsamaisoa ke mekhoa e meng ea phepelo ea motlakase.
- Ha boto e 'ngoe ea kopo e hokahane le J4, phini ea VIN, 5 V le 3.3 V e ka sebelisoa e le matla a tlhahiso; J7 5V pin e sebelisoang e le matla a tlhahiso ea 5 V; pinana ea VDD ea J1 le J2 e sebelisoang e le matla a tsoang ho 3.3 V.
IDD
Ketsahalong ea JP3 OFF (letšoao IDD) le R13 OFF, e lumelloa ho hokahanya ammeter ho lekanya tšebeliso ea matla ea AT32F415RCT7-7.
- JP3 OFF, R13 ON:
- E tsamaisoa ke AT32F415RCT7-7 (Litlhophiso tsa kamehla le plug ea JP3 ha e kentsoe pele e romelloa)
- JP3 ON, R13 OFF:
- E tsamaisoa ke AT32F415RCT7-7
- JP3 OFF, R13 OFF:
- Ammeter e tlameha ho kopanngoa ho lekanya tšebeliso ea matla ea AT32F415RCT7-7 (haeba ho se na ammeter, AT32F415RCT7-77 e ke ke ea sebelisoa).
Mananeo le debugging
E kenyelelitsoe AT-LINK-EZ
Boto ea tlhahlobo e kenya lenaneo la lenaneo la Artery AT-Link-EZ le sesebelisoa sa ho rarolla mathata bakeng sa basebelisi ho hlophisa/ho lokisa AT32F415RCT7-7 botong ea AT-START-F415. AT-Link-EZ e ts'ehetsa SWD interface mode mme e ts'ehetsa sehlopha sa likou tsa COM (VCP) ho hokela ho USART1_TX/USART1_RX (PA9/PA10) ea AT32F415RCT7-7. Tabeng ena, PA9 le PA10 tsa AT32F415RCT7-7 li tla angoa ke AT-Link-EZ ka tsela e latelang:
- PA9 e huloa ka bofokoli ho ea boemong bo phahameng ka pinana ea VCP RX ea AT-Link-EZ;
- PA10 e huleloa ka matla ho isa boemong bo holimo ke phini ea VCP TX ea AT-Link-EZ
Mosebelisi a ka beha R9 kapa R10 OFF, joale tšebeliso ea PA9 le PA10 ea AT32F415RCT7-7 ha e tlas'a lithibelo tse ka holimo. SWO debug port ea AT-Link-EZ e hoketsoe ho TRACESWO (PB3) ea AT32F415RCT7-7 ka R53, 'me e behiloe boemong ba ho phaphamala ha ts'ebetso ea SWO debug e koetsoe, e ke keng ea ama ts'ebeliso ea PB3 ka Setšoantšo sa AT32F415RCT7-7. Haeba o na le dipelaelo tse ding, seta R53 OFF.
Ka kopo sheba buka ea AT-Link User Manual bakeng sa lintlha tse felletseng mabapi le ts'ebetso, ntlafatso ea firmware le litemoso tsa AT-Link-EZ. AT-Link-EZ PCB e letlapeng la tlhahlobo e ka aroloa ho AT-START-F415 ka ho inamela holim'a lenonyeletso. Tabeng ena, AT-START-F415 e ntse e ka hokahanngoa le CN7 ea AT-Link-EZ ka CN2 (e sa kenngoeng pele e romelloa), kapa e ka hokahanngoa le AT-Link e 'ngoe ho ntšetsa pele lenaneo le debugging ho AT32F415RCT7- 7.
20-pin ARM® standard JTAG sehokedi
AT-START-F415 e boetse e boloka JTAG kapa likhokahano tsa sepheo se akaretsang sa SWD joalo ka lisebelisoa tsa ho hlophisa / ho lokisa liphoso. Haeba basebelisi ba batla ho sebelisa sebopeho sena ho hlophisa le ho lokisa AT32F415RCT7-7, ka kopo arola AT-Link-EZ botong ena kapa u behe R41, R44 le R46 OFF, 'me u hokele CN3 (e sa behoang pele e romelloa) lenaneong le sesebelisoa sa ho lokisa liphoso.
Khetho ea mokhoa oa ho qala
Ha u qala, ho ka khethoa mekhoa e meraro e fapaneng ea boot ka ho sebelisa li-pin configuration.
Lethathamo la 1: Setlhophiso sa jumper ea khetho ea mokhoa oa boot
|
Jumper |
Lithapa tsa khetho ea mokhoa oa boot |
Litlhophiso |
|
| BOTSOA1 | BOTSOA0 | ||
| JP1 e amanang le GND kapa OFF;
JP4 ea boikhethelo kapa e TLOHILE |
X |
0 |
Qala ho tsoa ho memori ea Flash e kahare
(Boemo ba kamehla ba feme) |
| JP1 e hokahantsoeng le VDD
JP4 e hokahantsoeng le GND |
0 |
1 |
Qala ho tswa ho memori ea tsamaiso |
| JP1 e hokahantsoeng le VDD
JP4 e hokahantsoeng le VDD |
1 |
1 |
Qala ho tloha SRAM |
Mohloli oa oache oa kantle
Mohloli oa oache oa HSE
Ho na le mekhoa e meraro ea lisebelisoa tsa ho beha mehloli ea lioache tse lebelo le holimo:
- kristale e ka holim'a board (setting ea kamehla):
- Kristale ea 8 MHz botong e sebelisoa e le mohloli oa oache oa HSE. Setting ea hardware e tlameha ho ba: R1 le R15 ON, R14 le R16 OFF
- Oscillator e tsoang kantle ho PD0:
- Oscillator ea ka ntle e kenngoa ho tloha pin_5 ea J2. Setting ea hardware e tlameha ho ba: R14 le R16 ON, R1 le R15 OFF.
- HSE ha e sebelisoe:
- PD0 le PD1 li sebelisoa e le GPIO. Setting ea hardware e tlameha ho ba: R14 le R16 ON, R1 le R15 OFF.
Mohloli oa oache oa LSE
Ho na le mekhoa e meraro ea lisebelisoa tsa ho beha mehloli ea oache e lebelo le tlase:
- kristale e ka holim'a board (setting ea kamehla ea feme):
- Letlapa la 32.768 kHz ka boto le sebelisoa e le mohloli oa oache oa LSE. Litlhophiso tsa hardware li tlameha ho ba: R6 le R7 ON, R5 le R8 OFF
- Oscillator e tsoang kantle ho PC14:
- Oscillator ea ka ntle e kenngoa ho tloha pin_3 ea J2. Setting ea hardware e tlameha ho ba: R5 le R8 ON, R6 le R7 OFF.
- LSE ha e sebelisoe:
- PC14 le PC15 li sebelisoa e le GPIO. Litlhophiso tsa hardware li tlameha ho ba: R5 le R8 ON, R6 le R7 OFF.
Lipontšo tsa LED
- Matla a LED 1
- Bofubelu bo bontša hore boto e tsamaisoa ke 3.3 V.
- Mosebelisi oa LED2
- E khubelu, e hokahane le phini ea PC2 ea AT32F415RCT7-7.
- Mosebelisi oa LED3
- Bosehla, bo hokahaneng le phini ea PC3 ea AT32F415RCT7-7
- Mosebelisi oa LED4
- Botala, bo hokahaneng le pini ea PC5 ea AT32F415RCT7-7
Likonopo
- Seta konopo ea B1 bocha:
- E hoketsoe ho NRST ho seta bocha AT32F415RCT7-7
- Konopo ea mosebelisi B2:
- E, ka ho sa feleng, e hoketsoe ho PA0 ea AT32F415RCT7-7, 'me ka tsela e 'ngoe e sebelisoa e le konopo ea ho tsoha (R19 ON, R21 OFF); Kapa e hokahane le PC13 mme ka tsela e 'ngoe e sebelisoa joalo ka TAMPKonopo ea ER-RTC (R19 OFF, R21 ON)
USB OTG
Boto ea AT-START-F415 e ts'ehetsa moamoheli oa USB oa lebelo le felletseng/lebelo le tlase kapa mokhoa oa puisano oa sesebelisoa sa lebelo le felletseng ka sehokelo sa USB Micro-B (CN5). Ka mokhoa oa sesebelisoa, AT32F415RCT7- 7 e ka kopanngoa ka ho toba ho moeti ka USB micro-B, 'me VBUS e ka sebelisoa e le matla a 5 V a boto ea AT-START-F415; Boemong ba moamoheli, thapo ea kantle ea USB OTG ea hlokahala ho hokela sesebelisoa, 'me e laola phepelo ea motlakase ea USB Micro-B sehokelo ho sesebelisoa ka ho laola transistor S8550 ka koung ea PD2. Ntle le moo, boto ea AT-START-F415 e boetse e na le sehokelo sa mofuta oa USB A (CN1), e leng sehokelo sa moamoheli oa USB haholo-holo bakeng sa ho hokela U disk le lisebelisoa tse ling ntle le tlhoko ea thapo ea USB OTG. Sehokelo sa mofuta oa USB A ha se na taolo ea ho switjha motlakase.
Ha PA9 kapa PA10 ea AT32F415RCT7-7 e sebelisoa e le OTG_FS_VBUS kapa OTG_FS_ID mosebetsi, JP6 kapa JP7 e lokela ho khetha OTG_FS e tlaase. Tabeng ena, PA9 kapa PA10 e hokahane le sehokelo sa USB micro-B mme e khaotsoe ho lihokelo tsa katoloso ea ArduinoTM Uno R3 (J3~J7), LQFP64 I/O lihokelo tsa katoloso (J1 le J2) le sehokelo sa AT-Link (CN2).
0 Ω lihanyetsi
Lethathamo la 2. 0: Ω tlhophiso ea resistor
| Bahanyetsi | Naha(1) | Tlhaloso |
|
R13 (Tekanyo ea tšebeliso ea matla a Microcontroller) |
ON |
Ha JP3 e TLOhile, 3.3V e hokela ho microcontroller ho
fana ka phepelo ea motlakase bakeng sa AT32F415RCT7-7 |
|
TLOA |
Ha JP3 e TLOhile, 3.3V e lumella ammeter ho hokeloa ho lekanya tšebeliso ea matla ea AT32F415RCT7-7.
(haeba ho se na ammeter, AT32F415RCT7-7 e ke ke ea sebelisoa) |
|
| R4
(Motlakase oa VBAT) |
ON | VBAT e hokahane le VDD |
| TLOA | VBAT e ka tsamaisoa ke pin_1 VBAT ea J2 | |
|
R1, R14, R15, R16 (HSE) |
ON, TIMELA, BUTSE, TLWA | Mohloli oa oache oa HSE o sebelisa kristale Y2 botong |
|
TIMA, BUTSA, TIMA, BUTSE |
Mohloli oa oache oa HSE o tsoa PD0 ea kantle kapa PD0 le PD1 li
e sebelisoa e le GPIO. |
|
|
R5, R6, R7, R8 (LSE) |
TIMA, BUTSE, BUTSE, TIMA | Mohloli oa oache oa LSE o sebelisa kristale Y1 ka boto |
|
ON, TIMA, TIMA, BUTSE |
Mohloli oa oache oa LSE o tsoa ho PC14 ea kantle kapa PC14 le PC15
li sebelisoa e le GPIO. |
|
| R19, R21
(Konopo ea mosebelisi B2) |
ON, TSOANG | Konopo ea mosebelisi B2 e hokahane le PA0 |
| TIMA, TS'OELE | Konopo ea mosebelisi B2 e hokahane le PC13 | |
|
R29, R30 (PA11, PA12) |
TIMA, TLOA |
Ha PA11 le PA12 li sebelisoa joalo ka USB, ha li joalo
e hokahane le pin_12 le pin_13 ea J1 |
|
TSOELA, TSOELA |
Ha PA11 le PA12 li sa sebelisoe joalo ka USB, li ka ba joalo
e hokahane le pin_12 le pin_13 ea J1 |
|
|
R31, R32, R33, R34 (ArduinoTM A4, A5) |
TIMA, BON, TIMA, ON |
ArduinoTM A4 le A5 li hokahane le ADC1_IN11, le
ADC1_IN10 |
|
ON, TIMELA, BUTSE, TLWA |
ArduinoTM A4 le A5 li hokahane le I2C1_SDA le
I2C1_SCL |
|
|
R35, R36 (ArduinoTM D10) |
TIMA, ON | ArduinoTM D10 e hoketsoe ho SPI1_SS |
| ON, TSOANG | ArduinoTM D10 e hoketsoe ho PWM (TMR4_CH1) | |
|
R9 (UART1_RX) |
ON |
USART1_RX ea AT32F415RCT7-7 e hokahane le VCP TX ea
AT-LINK-EZ |
|
TLOA |
USART1_RX ea AT32F415RCT7-7 e khaotsoe ho VCP
TX ea AT-LINK-EZ |
|
|
R10 (UART1_TX) |
ON |
USART1_TX ea AT32F415RCT7-7 e hokahane le VCP RX ea
AT-LINK-EZ |
|
TLOA |
USART1_TX ea AT32F415RCT7-7 e khaotsoe ho VCP
RX ea AT-LINK-EZ |
- Boemo ba kamehla ba feme ea Rx bo bontšoa ho BOLD.
Lihokelo tsa katoloso
Sehokelo sa katoloso ea ArduinoTM Uno R3
Plaka ea basali ea J3~J6 le li-plugins tse tona tsa J7 tse tšehetsang ArduinoTM Uno R3 tse tloaelehileng. Bongata ba mapolanka a barali a etselitsoeng haufi le Arduino TM Uno R3 a loketse AT-START-F415.
Tlhokomeliso 1: Likou tsa I / O tsa AT32F415RCT7-7 ke 3.3 V e lumellanang le ArduinoTM Uno R3, empa 5V ha e lumellane.
Tlhokomeliso 2: Pin_8 ea J3 ke VDDA, e nang le boemo bo lekanang le VDD, ntle le mosebetsi oa AFEF o hlalosoang ke ArduinoTM Uno R3.
Lethathamo la 3: Tlhaloso ea phini ea sehokelo sa ArduinoTM Uno R3
| Sehokedi | Nomoro ea phini | Lebitso la pini la Arduino | Setšoantšo sa AT32F415 lebitso | Mesebetsi |
|
J4 (Phepelo ea motlakase) |
1 | NC | – | – |
| 2 | IOREF | – | Tlhaloso ea 3.3V | |
| 3 | RETS'ELISITSOE | NRST | Ho tsosolosa ka ntle | |
| 4 | 3.3V | – | 3.3V kenyeletso/ho tsoa | |
| 5 | 5V | – | 5V kenyeletso/ho tsoa | |
| 6 | GND | – | Fatše | |
| 7 | GND | – | Fatše | |
| 8 | VIN | – | 7 ~ 12V tlhahiso / tlhahiso | |
|
J6 (Mongolo oa analog) |
1 | A0 | PA0 | ADC1_IN0 |
| 2 | A1 | PA1 | ADC1_IN1 | |
| 3 | A2 | PA4 | ADC1_IN4 | |
| 4 | A3 | PB0 | ADC1_IN8 | |
| 5 | A4 | PC1 kapa PB9(1) | ADC1_IN11 kapa I2C1_SDA | |
| 6 | A5 | PC0 kapa PB8(1) | ADC1_IN10 kapa I2C1_SCL | |
|
J5 (Moputso oa kelello / tlhahiso e tlase) |
1 | D0 | PA3 | UART2_RX |
| 2 | D1 | PA2 | UART2_TX | |
| 3 | D2 | PA10 | – | |
| 4 | D3 | PB3 | TMR2_CH2 | |
| 5 | D4 | PB5 | – | |
| 6 | D5 | PB4 | TMR3_CH1 | |
| 7 | D6 | PB10 | TMR2_CH3 | |
| 8 | D7 | PA8 | – | |
|
J3 (Moputso oa logic/output high byte) |
1 | D8 | PA9 | – |
| 2 | D9 | PC7 | TMR1_CH2 | |
| 3 | D10 | PA15 kapa PB6(1) | SPI1_NSS kapa TMR4_CH1 | |
| 4 | D11 | PA7 | TMR3_CH2 kapa SPI1_MOSI | |
| 5 | D12 | PA6 | SPI1_MISO | |
| 6 | D13 | PA5 | SPI1_SCK | |
| 7 | GND | – | Fatše | |
| 8 | VDDA | – | Tlhahiso ea VDDA | |
| 9 | SDA | PB9 | I2C1_SDA | |
| 10 | SCL | PB8 | I2C1_SCL |
|
J7 (Ba bang) |
1 | MISO | PB14 | SPI2_MISO |
| 2 | 5V | – | 5V kenyeletso/ho tsoa | |
| 3 | TS'ELISO | PB13 | SPI2_SCK | |
| 4 | MOSI | PB15 | SPI2_MOSI | |
| 5 | RETS'ELISITSOE | NRST | Ho tsosolosa ka ntle | |
| 6 | GND | – | Fatše | |
| 7 | NSS | PB12 | SPI2_NSS | |
| 8 | PB11 | PB11 | – |
- 0Ω setting ea resistor e bontšoa ho Lethathamo la 2.
Sehokelo sa katoloso ea koung ea LQFP64 I/O
Lihokelo tsa katoloso J1 le J2 li ka hokela AT-START-F415 ho prototype ea kantle / boto ea ho paka. Likou tsa I/O tsa AT32F415RCT7-7 lia fumaneha ho lihokelo tsena tsa katoloso. J1 le J2 le tsona li ka lekanyetsoa ka oscilloscope, logic analyzer kapa voltmeter probe.
Leano
Nalane ea ntlafatso
Lethathamo la 4: Nalane ea ntlafatso ea litokomane
| Letsatsi | Khatiso | Liphetoho |
| 2019.8.16 | 1.0 | Tokollo ea pele |
|
2020.6.1 |
1.1 |
1. CB8 e fetotsoeng ho ea ho 1 μF.
2. E lokisitse silika ka lehlakoreng le ka morao ho AT32F415RCT7-7. 3. Ho nkeloa sebaka ke kristale ea 8 MHz. 4. Optimized tataiso ea solder borokho. 5. Fetola LED3 hore e be mosehla. |
|
2020.9.29 |
1.20 |
1. Fetola khoutu ea ntlafatso ea tokomane ena ho linomoro tse 3, tse peli tsa pele bakeng sa mofuta oa AT-START hardware, le ea ho qetela bakeng sa tokomane.
2. E ntlafalitse phetolelo ea AT-Lin-EZ ho 1.1 ho tšehetsa SWO debug; le E kentse tlhaloso ea SWO. |
|
2020.11.19 |
1.30 |
1. E ntlafalitse mofuta oa AT-Link-EZ ho 1.2, le ho lokisa mela e 'meli ea matšoao a CN7, le ho fetola silkscreen.
2. E fetotsoe silkcreen ea CN2 ho latela lisebelisoa tsa ntlafatso ea Artery. 3. E kentse selikalikoe sa phini ea tlhahlobo ea GND ho nolofatsa tekanyo. |
BOHLOKOA TSEBISO
TSEBISO EA BOHLOKOA: NTHABISENG KA HLOKO
Bareki ba utloisisa le ho lumela hore bareki ke bona feela ba ikarabellang bakeng sa khetho le tšebeliso ea lihlahisoa le litšebeletso tsa Artery. Lihlahisoa le litšebeletso tsa Artery li fanoa ka "JOALOKAHA" 'me Artery ha e fane ka litiisetso tse hlalosoang, tse boletsoeng kapa tsa molao, ho kenyeletsoa, ntle le moeli, litiisetso life kapa life tse boletsoeng tsa thekiso, boleng bo khotsofatsang, ho se tlole molao, kapa ho phela hantle molemong oa morero o itseng mabapi le Artery's. lihlahisoa le litšebeletso.
Leha ho le joalo, bareki ha ba fumane tokelo, tlotla kapa thahasello ho lihlahisoa le litšebeletso tsa Artery kapa litokelo life kapa life tsa thepa ea mahlale tse kenyellelitsoeng ho eona. Leha ho le joalo, lihlahisoa le litšebeletso tsa Artery li ke ke tsa hlalosoa e le (a) ho fana ka bareki, ka ho hlaka kapa ka moelelo, estoppel kapa ka tsela e 'ngoe, laesense ea ho sebelisa lihlahisoa le litšebeletso tsa batho ba bang; kapa (b) ho fana ka laesense litokelo tsa thepa ea bohlale tsa batho ba boraro; kapa (c) ho fana ka tumello ea lihlahisoa le litšebeletso tsa motho e mong le litokelo tsa eona tsa thepa ea mahlale. Bareki ba lumela hore lihlahisoa tsa Artery ha lia lumelloa ho sebelisoa e le, 'me bareki ba ke ke ba kopanya, ho khothaletsa, ho rekisa kapa ho fetisetsa sehlahisoa sefe kapa sefe sa Artery ho moreki ofe kapa ofe kapa mosebelisi oa ho qetela bakeng sa ho sebelisoa e le likarolo tsa bohlokoa ho (a) meriana efe kapa efe, pholoso ea bophelo kapa bophelo. sesebediswa sa tshehetso kapa tsamaiso, kapa (b) sesebediswa sefe kapa sefe sa polokeho tshebedisong efe kapa efe ya koloi le motjhini (ho kenyeletswa empa ho sa felle feela ho disistimi tsa mariki kapa mekotla ya moya), kapa (c) disebediswa dife kapa dife tsa nyutlelie, kapa (d) sesebediswa sefe kapa sefe sa taolo ya sephethephethe sa moyeng. , kopo kapa tsamaiso, kapa (e) sesebelisoa leha e le sefe sa libetsa, ts'ebeliso kapa tsamaiso, kapa (f) sesebelisoa leha e le sefe, ts'ebeliso kapa tsamaiso moo ho ka lebelloang pele hore ho hlōleha ha lihlahisoa tsa Artery joalo ka ha li sebelisoa mochine o joalo, ts'ebeliso kapa tsamaiso e ka lebisa. ho isa lefung, kotsi ya mmele kapa tshenyo e mpe ya thepa.
© 2020 ARTERY Technology Corporation - Litokelo tsohle li sirelelitsoe
Litokomane / Lisebelisoa
 |
ARTERYTEK AT-START-F415 32 Bit Microcontroller [pdf] Bukana ea Mosebelisi AT32F415RCT7-7, AT-START-F415, AT-START-F415 32 Bit Microcontroller, 32 Bit Microcontroller, Microcontroller |