Nano Connector Carrier
Leqephe la lintlha
Bukana ea Mosebelisi
SKU: ASX00061
Tlhaloso
The Nano Connector Carrier is a practical solution for expanding the capabilities of our Nano product family. It is plug-and-play compatible with Qwiic and Grove modules, making rapid prototyping easier than ever.
Whether diving into MicroPython or Matter, building with Modulinos, or developing AI-powered applications, this carrier provides a simple platform for bringing your ideas to life.
The onboard microSD card slot e bula menyetla e mecha ea ho rengoa ha data, Edge AI le litlhoko tsa polokelo ea nako ea nnete.
Libaka tse Lebeletsoeng:
Industrial Automation, Rapid Prototyping, Bopaki ba Maikutlo, Edge AI, Research le Development
Kopo Examples
Industrial Automation:
- Ho Rengoa ha Lintlha: Data Logger as a compact, all-in-one device for efficient data collection and storage, ideal for IoT and sensor-based applications. With Nano boards advanced features and a compact design, it simplifies sensor interfacing, data management, and storage, making it perfect for smart homes, industrial monitoring, and research projects.
- Tlhokomelo ea Pele: Leverage the powerful features of the Nano Connector Carrier to develop a robust
predictive maintenance prototype for industrial machinery. Utilize Modulino to monitor key operational parameters and detect anomalies or early signs of wear, enabling proactive maintenance and reducing downtime. Enhance this system with the Nano 33 BLE Sense, which continuously gathers crucial environmental data, including temperature, humidity, and vibrations to assess the overall health of the machinery. - Bopaki ba Mohopolo: Expand your Nano board’s capabilities with Nano Connector Carrier. The Nano Connector Carrier is ready for use with a wide range of external hardware components or modules, covering all your needs, from embedded sensing to actuation.
Prototyping: - Compact Device: Effortlessly integrate the Connector Carrier into your interactive prototype, regardless of whether the Nano board is based on. Its plug-and-play sensors and actuators make development seamless. Whether using modules from our Qwiic or Grove series, its compact design allows you to experiment in small spaces, making it a perfect platform for testing and validating your tech ideas.
- Lehae le bohlale: Easily prototype any smart device that can monitor and adjust temperature, humidity, or occupancy levels by combining Nano Connector Carrier, Modulinos and Nano Matter. Integrate with Matter-compatible smart home systems like Alexa or Google Home for frictionless voice control and automation.
- Molaoli: Using the Nano Connector Carrier, you can easily prototype a versatile RC-MIDI – RF-BLE – HID -DMX controller for your projects. With plug-and-play support for sensors and actuators, you can create custom interfaces that respond to touch, motion or even pressure. The compact design allows for a fully portable setup using Modulinos or third-party sensors.
Thuto:
- Micropython Learning: Easily dive into MicroPython with the Nano Connector Carrier, Modulinos and Nano ESP32 as your learning platform, Its plug-and-play support for sensors and actuators allows you to experiment with real-world applications right away, whether you’re reading sensor data, controlling LEDs, or building interactive projects.
- Cross-Disciplinary Student Projects: The Connector Carrier accelerates interdisciplinary collaboration by
enabling rapid prototyping in classroom and lab environments. Its compact, modular design allows students across various fields (including engineering, computer science and the arts) to quickly develop, test, and refine ideas using Arduino Nano boards. Students can seamlessly integrate sensors, actuators and communication modules with built-in connectivity and expansion options, fostering hands-on experimentation and innovation. - Sustainability and Green Tech: Energy Management project where students can design and test systems that monitor or reduce energy use in buildings or devices, promoting sustainability and teaching about renewable energy or energy efficiency, within integrated solar or wind power systems.
Likaroloana
2.1 Litlhaloso Kakaretso Ho Fetileview
Likarolo tsa mantlha tsa Nano Connector Carrier li hlalositsoe ka botlalo tafoleng e bontšitsoeng ka tlase.
| Sebopeho | Tlhaloso |
| Li-interface | 2x Grove analog/digital connector 1x sehokelo sa Grove I2C 1x sehokelo sa Grove UART 1x sehokelo sa Qwiic I2C 1x sebali sa karete ea microSD |
| I/O Moqtage | Switch between +3.3 V and +5 V |
| Litekanyo | 28 limilimithara x 43 limilimithara |
| Thempereichara ea ho sebetsa | -40 °C ho ea +85 °C |
2.2 Khetho ea Boto
Nano Connector Carrier e u lumella ho khetha liboto tsa +5 V kapa +3.3 V Nano ho netefatsa ho lumellana le lelapa lohle la Nano. Ho etsa sena, fetola sepalangoang ho ea sebakeng sa sona, ho latela tafole e ka tlase.
| 3V3 | 5V |
| Nano ESP32 | Arduino Nano |
| Nano 33 IoT | Nano Every |
| Nano 33 BLE | |
| Nano 33 BLE Rev2 | |
| Nano 33 BLE Sense | |
| Nano 33 BLE Sense Rev2 | |
| Nano RP2040 Connect | |
| Nano Matter |
Setting the switch to a specific position (3.3 V or 5V) also manages the voltage output on the Grove connector VCC pin.
Hlokomela: The logic and power voltage ea sehokelo sa Qwiic le sekotjana sa karete ea microSD li lula li le +3.3 V ho sa tsotelehe boemo ba switjha ea mokhethoa oa boto.
2.3 Sehokelo sa Qwiic I2C
Sehokelo sa Qwiic se hokahantsoe le bese e tloaelehileng ea I2C botong (ka A4 le A5 pins). E tsamaisoa ka +3.3 V, ho latela mokhoa o tloaelehileng oa Qwiic, ho etsa hore Nano Connector Carrier e tsamaisane le li-node tsa Arduino Modulino.
Its logic level is fixed to +3.3 V, which is translated to the host Nano board voltage defined by the board selector switch.
2.4 Grove Connectors
Nano Connector Carrier e na le lihokelo tsa 4x Grove tse pepesang libaka tse kholo tsa puisano tsa boto ea baeti.
Hlokomela: The Grove connectors VCC voltage e laoloa ke boto selector switjha.
2.5 karete ea Micro SD
The onboard microSD card slot e bula menyetla e mecha ea ho rengoa ha data, Edge AI le litlhoko tsa polokelo ea nako ea nnete.
Hlokomela: The microSD card SPI Slave Select (SS) pin can be changed using the solder jumpers on the carrier. See pinout section for more details.
2.6 Lipuisano tsa Lipuisano
Nano Connector Carrier e pepesa likhokahano tsohle tsa boto ea moamoheli oa Nano le likhokahano tsa puisano ka lithakhisa tsa hlooho le likhokahano.
| Li-interface | Sehokedi |
| UART (x1) | – Nano header connector – Grove connector |
| SPI (x1) | – Nano header connector - Slot ea karete ea Micro SD |
| I2C (x1) | – Nano header connector - Sehokelo sa Qwiic – Grove connector |
| Analog/Digithale | – Nano header connector - 2x lihokelo tsa Grove |
2.7 Lihlahisoa tse Amanang
- Arduino Nano (A000005)
- Nano 33 BLE (ABX00030)
- Nano 33 BLE Rev2 (ABX00071 / ABX00072)
- Nano 33 BLE Sense (ABX00031)
- Nano 33 BLE Sense Rev2 (ABX00069)
- Nano 33 IoT (ABX00027)
- Nano ESP32 (ABX00083 / ABX00092 / ABX00083_CN / ABX00092_CN)
- Nano Every (ABX00028)
- Nano Matter (ABX00112 / ABX00137)
- Nano RP2040 Connect (ABX00053)
- Arduino Modulino nodes
Matla le Ratings
3.1 Maemo a Tšebetso a khothalelitsoeng
| Letšoao | Tlhaloso | Min | Tlanya | Max | Yuniti |
| 3V3 | Keletso voltage from 3.3 V boards | - | 3.3 | - | V |
| 5V | Keletso voltage from 5 V boards | - | 5.0 | - | V |
| HLOMPHO | Mocheso oa ho sebetsa | -40 | 25 | 85 | °C |
Hlokomela: The Nano Connector Carrier is powered by the host board’s nominal voltage.
3.2 Sefate sa Matla
Setšoantšo se latelang se bonts'a meralo ea mantlha ea motlakase ea Nano Connector Carrier.
E sebetsa hapeview
Nano Connector Carrier e holisa khokahano ea lelapa la liboto tsa Nano, e nang le lihokelo tse fapaneng tsa Grove le Qwiic. E boetse e kenyelletsa sebopeho sa karete ea Micro SD bakeng sa ho rengoa ha data.
4.1 Tlanya
The Nano Connector Carrier pinout is shown in the following figure.
4.1.1 Analog (JP1)
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 1 | D13 / SCK | Dijithale | Seriba oache |
| 2 | + 3.3 V | Tlosa Matla | +3.3 V Power Rail |
| 3 | B0 / AREF | Analoge | Analog Reference |
| 4 | A0 | Analoge | Ho kenya Analog 0 |
| 5 | A1 | Analoge | Ho kenya Analog 1 |
| 6 | A2 | Analoge | Ho kenya Analog 2 |
| 7 | A3 | Analoge | Ho kenya Analog 3 |
| 8 | A4 | Analoge | Kenyelletso ea Analog 4 / I²C Serial Data (SDA) |
| 9 | A5 | Analoge | Kenyelletso ea Analog 5 / I²C Serial Clock (SCL) |
| 10 | A6 | Analoge | Ho kenya Analog 6 |
| 11 | A7 | Analoge | Ho kenya Analog 7 |
| 12 | +5V | Matla | USB power (5 V) |
| 13 | BOTSOA1 | Mokhoa | Reset Boto 1 |
| 14 | GND | Matla | Fatše |
| 15 | VIN | Matla | MoqtagKeletso |
4.1.2 Digital (JP2)
| Pin | Mosebetsi | Mofuta | Tlhaloso |
| 15 | D12 / MISO | Dijithale | Mong'a Lekhoba |
| 14 | D11 / MOSI | Dijithale | Hlahloba makhoba |
| 13 | D10 / SS | Dijithale | Khetha Makhoba |
| 12 | D9 | Dijithale | Digital pin 9 |
| 11 | D8 | Dijithale | Digital pin 8 |
| 10 | D7 | Dijithale | Digital pin 7 |
| 9 | D6 | Dijithale | Digital pin 6 |
| 8 | D5 | Dijithale | Digital pin 5 |
| 7 | D4 / SD_SS | Dijithale | Digital pin 4 / Default SD card SS |
| 6 | D3 / *SD_SS | Dijithale | Digital pin 3 / Optional SD card SS |
| 5 | D2 / *SD_SS | Dijithale | Digital pin 2 / Optional SD card SS |
| 4 | GND | Matla | Fatše |
| 3 | RST | Ka hare | Seta bocha |
| 2 | D0 / RX | Dijithale | Digital pin 0 / Serial Receiver (RX) |
| 1 | D1 / TX | Dijithale | Digital pin 1 / Serial Transmitter (TX) |
*SD_SS ke liphini tsa boikhethelo tsa SPI Slave Select (SS) bakeng sa puisano ea karete ea Micro SD. Sheba pinout bakeng sa lintlha tse ling.
4.2 Setšoantšo sa Block
Ho fedileview of the Nano Connector Carrier high-level architecture is illustrated in the figure below.
Board Topology
5.1 Ka kakaretso View
| Referense | Tlhaloso |
| U1, U2, U3, U5 | Push pull translators (SN74LVC1G125DCKR) |
| U4 | Open drain translator (TCA9406DCUR) |
| J2, j3 | Nano board headers |
| S1 | Board selector switch |
| J5 | Grove analog connector |
| J7 | Grove analog connector |
| J4 | Grove UART connector |
| J8 | Qwiic I2C connector |
| J9 | microSD card connector |
Ts'ebetso ea Sesebelisoa
6.1 Ho qala – IDE
If you want to program your Nano board to use the Nano Connector Carrier while offline you need to install the Arduino® Desktop IDE [1]. To connect the Nano board to your computer, you will need a USB cable, which can also provide power to the board.
6.2 Lisebelisoa tsa Marang-rang
Kaha joale u ithutile lintho tsa motheo tsa seo u ka se etsang le mofani oa thepa, u ka hlahloba menyetla ea eona e sa feleng ka ho hlahloba merero e thabisang ho Arduino Project Hub [4], Reference Library ea Arduino [5], le lebenkele la marang-rang [6]. Mona, o ka tlatselletsa boto ea hau ka li-sensor, li-actuator le tse ling.
Boitsebiso ba Mechini
Nano Connector Carrier ke boto e nang le mahlakore a mabeli a 28 mm x 43 mm e nang le lihlooho tsa basali tse peli tsa Nano tse pota-potileng lintlheng tse telele tse ka holimo, li-connectors tsa 4x Grove tse holimo, e 'ngoe e le k'honeng e' ngoe le e 'ngoe ea lehlakoreng le ka tlaase, slot ea karete ea Micro SD le sehokelo sa Qwiic ka tlaase.
7.1 Litekanyo tsa Boto
The outline and dimensions of the Nano Connector Carrier and mounting holes can be seen in the following figure; all the dimensions are in mm.
The Nano Connector Carrier has two 3.2 mm drilled mounting holes for mechanical fixing.
7.2 Lihokelo tsa Boto
The Nano Connector Carrier’s connectors are placed on the top side of the board, as shown in the figure below; all the dimensions are in mm.
Setifikeiti
8.1 Certificactions Summary
| Certification | Boemo |
| CE (European Union) | Ee |
| RoHS | Ee |
| FINYELLANG | Ee |
| WEEE | Ee |
| FCC (USA) | Ee |
| IC (Canada) | Ee |
| UKCA (UK) | Ee |
8.2 Phatlalatso ea Conformity CE DoC (EU)
Re phatlalatsa tlas'a boikarabelo ba rona hore lihlahisoa tse ka holimo li lumellana le litlhoko tsa bohlokoa tsa Litaelo tse latelang tsa EU 'me kahoo re tšoaneleha bakeng sa ho tsamaea ka bolokolohi ka har'a limmaraka tse kenyeletsang European Union (EU) le European Economic Area (EEA).
8.3 Phatlalatso ea Tumellano le EU RoHS & REACH 211 01/19/2021
Liboto tsa Arduino li lumellana le RoHS 2 Directive 2011/65/EU ea Paramente ea Europe le RoHS 3 Directive 2015/863/EU ea Lekhotla la 4 Phuptjane 2015 mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.
| Ntho | Boholo Moeli (Ppm) |
| Lebisa (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Motsoako (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Litokollo : Ha ho litokollo tse batloang.
Arduino Boards e lumellana ka botlalo le litlhoko tse amanang le European Union Regulation (EC) 1907 /2006 mabapi le Ngoliso, Tlhahlobo, Tumello le Thibelo ea Lik'hemik'hale (REACH). Ha re phatlalatse hore ha ho le e 'ngoe ea SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Lethathamo la Bakhethoa ba Matšoenyeho a Holimo Haholo bakeng sa tumello e lokollotsoeng hajoale ke ECHA, le teng lihlahisoang tsohle (le sephutheloana) ka bongata bo boholo bo lekanang kapa bo kaholimo ho 0.1%. Ho latela tsebo ea rona, re boetse re phatlalatsa hore lihlahisoa tsa rona ha li na letho la lintho tse thathamisitsoeng ho "Authorization List" (Annex XIV ea melaoana ea REACH) le Substances of Very High Concern (SVHC) ka chelete efe kapa efe ea bohlokoa joalo ka ha e boletsoe. ka Sehlomathiso sa XVII sa Lethathamo la Bakhethoa le hatisitsoeng ke ECHA (European Chemical Agency) 1907 /2006/EC.
8.4 Phatlalatso ea Liminerale tsa Khohlano
Joaloka mofani oa lefats'e oa lisebelisoa tsa elektroniki le tsa motlakase, Arduino e tseba boitlamo ba rona mabapi le melao le melaoana e amanang le Conflict Minerals, haholoholo Dodd-Frank Wall Street Reform and Consumer Protection Act, Karolo ea 1502. Arduino ha e hlahise kapa ha e sebetsane le likhohlano ka kotloloho. liminerale tse kang Tin, Tantalum, Tungsten, kapa Khauta. Liminerale tse loantšanang li fumaneha lihlahisoa tsa rona ka mokhoa oa solder, kapa e le karolo ea li-alloys tsa tšepe. E le karolo ea boitelo ba rona bo loketseng, Arduino e ikopanye le bafani ba thepa ba ka har'a ketane ea rona ea phepelo ho netefatsa hore ba tsoela pele ho latela melao. Ho ipapisitsoe le tlhaiso-leseling eo re e fumaneng ho tla fihlela joale, re phatlalatsa hore lihlahisoa tsa rona li na le Liminerale tsa Conflict tse tsoang libakeng tse se nang likhohlano.
8.5 Tlhokomeliso ea FCC
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Polelo ea Ts'oaetso ea Mahlaseli a FCC RF:
- Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna efe kapa efe kapa transmitter.
- Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a RF e behiloeng bakeng sa tikoloho e sa laoleheng.
- Sesebelisoa sena se lokela ho kengoa le ho sebetsoa ka bonyane ba 20 cm lipakeng tsa radiator le 'mele oa hau.
User manuals for licence-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both. This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:
(1) sesebelisoa sena se ke ke sa baka tšitiso (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Tlhokomeliso ea IC SAR:
Sesotho Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20 cm pakeng tsa radiator le 'mele oa hau.
Bohlokoa: Mocheso o sebetsang oa EUT ha oa lokela ho feta 85 ℃ mme ha oa lokela ho ba ka tlase ho -40 ℃.
Ka hona, Arduino Srl e phatlalatsa hore sehlahisoa sena se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa Directive 201453/EU. Sehlahisoa sena se lumelletsoe ho sebelisoa linaheng tsohle tsa litho tsa EU.
Lintlha tsa Khampani
| Khampani Itsebo | Lintlha |
| Lebitso la K'hamphani | Arduino Srl |
| Aterese ea Khampani | Via Andrea Appiani, 25 - 20900 MONZA (Italy) |
Litokomane Tsa Litšupiso
| Referense | Sehokelo |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Leru) | https://app.arduino.cc/sketches |
| Arduino Cloud - Ho qala | https://docs.arduino.cc/arduino-cloud/guides/overview/ |
| Morero Hub | https://projecthub.arduino.cc/ |
| Reference Puo | https://docs.arduino.cc/language-reference/ |
| Online Store | https://store.arduino.cc/ |
Fetola Log
| Letsatsi | Khatiso | Liphetoho |
| 22/05/2025 | 2 | Litokiso tsa tekheniki, voltage notation standardization, nomenclature fixes and change log correction |
| 21/05/2025 | 1 | Phatlalatso ea Pele |
Nano Connector Carrier Datasheet
E fetotsoe: 26/05/2025
Litokomane / Lisebelisoa
 |
ARDUINO ASX00061 Nano Connector Carrier [pdf] Buka ea Taelo ASX00061, ASX00061 Nano Connector Carrier, Nano Connector Carrier, Nano Connector, Connector Carrier, Carrier |