AEMC Instruments SR759 AC Current Probe

MOEKETSI MOSEBETSI

Setšoantšo sa SR759

TLHALOSO

Mohlala oa SR759 AC Current Probe (Catalog #2116.33) e etselitsoe ho sebelisoa libakeng tsa indasteri. Moralo oa ergonomic o e lumella ho hokela habonolo likhoeleng kapa mabaleng a manyane a libese. Mehlahare e chitja e netefatsa ho nepahala ho hotle haholo le ho fetoha ha mekhahlelo e tlase. Probe e na le mekhahlelo e mene ea litekanyo tse nang le mefuta e phahameng ka ho fetisisa ea ho lekanya ho 1000 ARMS e tsoelang pele 'me e lumellana le AC Voltmeter efe kapa efe, multimeter, kapa vol.tagsesebelisoa sa ho lekanya se nang le likarolo tse latelang: Range le qeto e khonang ho hlahisa 1 mV ea tlhahiso ka 'ngoe amp ea hona joale e lekantsoeng; Ho nepahala ha Voltmeter ea 0.75% kapa ho feta ho nka advan e felletsengtage ea ho nepahala ha probe; Kenyelletso ea ≥10 MΩ.

TLHOKOMELO

Litemoso tsa polokeho li fanoa ho netefatsa polokeho ea basebetsi le ts'ebetso e nepahetseng ea sesebelisoa. Bala taelo ka botlalo.

• Sebelisa tlhokomeliso ho potoloho efe kapa efe: matla a ka bang phahamengtagmaqhubu le maqhubu a teng 'me a ka baka kotsi e tšosang.
• U se ke ua sebelisa probe haeba e senyehile. Kamehla o hokela probe ea hajoale ho sesebelisoa sa ho metha pele o hokeloa ho potoloha conductor
• Se ke oa sebelisa conductor e se nang insulated e nang le monyetla oa ho theola tšilafalo e fetang 600 V CAT III 2. E-ba hlokolosi haholo haampho pota-pota li-conductor tse se nang letho kapa maballo a libese.
• Pele o sebelisoa, hlahloba probe; sheba mapetsong a matlo kapa a tsoang ka har'a likhoele tsa motlakase.
• Se ke oa sebelisa clamp tikolohong e metsi kapa dibakeng tseo ho nang le digase tse kotsi.
• U se ke ua sebelisa probe kae kapa kae ka nģ'ane ho mokoallo oa tactile.

LITŠOANTŠISO TSA MOHLASE

Letšoao lena le bolela hore probe ea hona joale e sirelelitsoe ke ho pata habeli kapa ho matlafatsoa. Sebelisa feela likarolo tse ncha tse boletsoeng ke feme ha u sebeletsa sesebelisoa.

Letšoao lena le bolela TLHOKOMELISO! mme o kopa hore mosebelisi a bue ka bukana ea mosebelisi pele a sebelisa sesebelisoa.

Letšoao lena le bolela hore ona ke mofuta oa sensor ea hona joale ea A le hore kopo e haufi le ho tlosoa ho li-conductor tsa HAZARDOUS LIVE e lumelloa.

TLHALOSO EA MEKHATLO EA LITEKISO (KATSI)

• CAT IV: E tsamaellana le litekanyo tse etsoang phepelong ea motlakase ea mantlha (<1000 V).
• Example: lisebelisoa tsa mantlha tsa ts'ireletso ea overcurrent, likarolo tsa taolo ea ripple, le limithara.
• CAT III: E tsamaellana le litekanyo tse entsoeng ho kenngoeng ha moaho boemong ba kabo.
• Example: thepa e thata ka ho kenya ts'ebetsong e tsitsitseng le li-circuit breakers.
• CAT II: E tsamaellana le litekanyo tse etsoang lipotolohong tse hokahaneng ka kotloloho le sistimi ea kabo ea motlakase.
• Example: litekanyo tsa lisebelisoa tsa ntlo le lisebelisoa tse nkehang habonolo.

HO FUMANA MOROBE

Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa, 'me u tsebise mofani oa hau hang-hang, u fane ka tlhaloso e qaqileng ea tšenyo leha e le efe.

LIEKETSENG MOTLATSI

Boemo ba Hona Joale:
1 mA ho ya ho 1.2 A, 0.01 ho ya ho 12 A, (0.1 ho ya ho 120) A, (1 ho ya ho 1200) A
Letshwao la Phallo: 1000 mV/AAC (1 V @ 1 A), 100 mV/AAC (1 V @ 10 A), 10 mV/AAC
(1 V @ 100 A), 1 mV/AAC (1 V @ 1000 A)

Ho nepahala le Phase Shift*:

1 A Range

Pele Hona Joale	Nepahetse%	Karolo ea Shift
(0.001 ho isa ho 0.01) A	3 °/o + 1 mV	Ha ea hlalosoa
(0.01 to0.1)A	: 53% + 1 mV	Ha ea hlalosoa
(0.1to1)A	: 50.7 % + 1 mV	:510 °
(1 ho isa ho 1.2)A	: 50.7 % + 1 mV	:510 °

 

10 A Range

Pele Hona Joale	Nepahetse%	Karolo ea Shift
(0.01to0.1)A	1% + 0.2 mV	Ha ea hlalosoa
(0.1to1)A	: 50.5% + 0.2mV	: 55 0
(1 ho isa ho 10)A	:50.5%	: 52 0
(10 ho isa ho 12) A	:50.5%	: 52 0

100 A Range

Pele Hona Joale	Nepahetse%	Karolo ea Shift
(0.1 ho isa ho 1) A	1% + 0.2 mV	Ha ea hlalosoa
(1 ho isa ho 10)A	: 50.5 % + 0.2 mV	: 52 0
(10 ho isa ho 100) A	:50.3 Ofo	: 51 0
(100 ho isa ho 120) A	:50.2%	: 51 0

1000 A Range

Pele Hona Joale	Nepahetse%	Karolo ea Shift
(1 ho isa ho 10) A	1% + 0.2 mV	Ha ea hlalosoa
(10 ho isa ho 100) A	: 50.5 % + 0.2 mV	: 52 0
(100 ho isa ho 1000)A	:50.2%	: 51 0
(1000 ho isa ho 1200) A	:50.2%	: 51 0

 

*Maemo a litšupiso: 23 °C ± 3 °K, (20 ho 75)% RH, (48 ho 65) Hz, matla a khoheli a ka ntle <40 A/m, ha ho karolo ea DC, ha ho na mokhanni ea jereng ea ka ntle, liteko sample centered. Khokahano ea ho jara 10 MΩ

• Overload: 1200 A bakeng sa 15 min ON, 30 min OFF
• Ho nepahala: Ho latela IEC 185
• Mefuta ea maqhubu: 30 Hz ho 3 kHz; ho fokotseha ha hona joale ka holimo ho 500 Hz ho sebelisa foromo: 1000 A × 1 F (kHz)
• Bothata ba Mojaro: 100 kΩ min
• Sebetsa Voltage: 600 V CAT III
• Mokhoa o Tloaelehileng Moqtage: 600 V CAT III
• Tšusumetso ea Mokhanni ea Haufi: <1 mA/AAC
• Tšusumetso ea Mokhanni ha a Bula Mehlahare: 0.3 % ea ho Bala
• Tšusumetso ea Maqhubu:
  1 mV/A Range: <1 % R ho tloha ho 10 Hz ho isa ho 1 kHz
  10 mV/A Range: <1.5 % R ho tloha ho 10 Hz ho isa ho 3 kHz
  100 mV/A Range: <2 % R ho tloha ho 10 Hz ho isa ho 3 kHz
  1000 mV/A Range: <2 % R ho tloha ho 30 Hz ho isa ho 1 kHz
• Bula Voltage: 8 V phahameng ka ho fetisisa.

LIEKETSENG MOCHA

• Thempereichara ea ho sebetsa: (14 ho isa ho 122) °F (-10 ho isa ho 50) °C)
• Mocheso oa Polokelo: (-4 ho 158) °F (-20 ho ea ho 70) °C
• Tšusumetso ea Mocheso: <0.15 % ho 10 °K
• Tšusumetso ea Mongobo: Ho tloha (10 ho isa ho 90) % RH: 0.1 %
• Ho Bula ha Mohlahare: 2.25 in (57 mm) max
• Boholo bo Holimo ba Mokhanni: 2.05 in (52 mm)
• Tšireletso ea Enfelopo: IP 40 (IEC 529)
• Teko ea ho theoha: 1 m (IEC 68-2-32)
• Tšisinyeho:
  (25 ho isa ho 55) Hz, 0.25 mm
  (15 ho isa ho 25) Hz, 1 mm
  (5 ho isa ho 15) Hz, 0.15 mm (IEC 68-2-6)
• Boitsebiso:
• Lihandle le mehlahare: Polycarbonate UL94V0
• Litekanyo: (4.37 x 8.50 x 1.77) ho (111 x 216 x 45) mm
• Boima: 1.21 lbs (550 g)
• Sephetho: Lithapo tse peli tsa mantlha tse nang le mohatla o matlafalitsoeng kapa habeli, 1.5 m (5 ft) e emisitsoeng ka li-plug tse peli tsa polokeho (4 mm)

TS'IRELETSO TS'OANE

Tumellano ea Motlakase ho Maemo a Machabeng:

Sesebelisoa sena se lumellana le IEC 61010-2-032, 300 V CAT IV le 600 V CAT III.
Ho kenya letsoho habeli kapa ho matlafalitsoe
Mofuta oa sensor ea hajoale ho IEC 61010-2-032: mofuta oa A

TAELO TSEBISO

AC Current Probe SR759 ………Cat #2116.33

Lisebelisoa:
Adapter – Banana (E Female) – (BNC) (Male) (XM-BB) (600 V CAT III)…………..Cat #2118.46
Adapter ea polaka ea Banana (ho polaka e sa kengoang)…………….Cat #1017.45

TS'EBETSO

Etsa bonnete ba hore u se u balile le ho utloisisa ka botlalo karolo ea TEMOSO leqepheng la 1.
Ho etsa Litekanyo ka Meetso ea AC Current Probe SR759

• Hokela litheminale tse ntšo le tse khubelu ho mefuta e 2 ea VAC ea DMM kapa voltagsesebelisoa sa ho metha. Khetha sebaka se loketseng sa hajoale (1000/1 V). Clamp motsu o pota-potileng sekontiri se lokelang ho lekoa ka motsu o lebisitseng moroalo. Bala ponts'o ea boleng ho DMM 'me u e atise ka tekanyo ea probe e khethiloeng. (mohlala, haeba ho bala = 185 mV, hona joale ho phallang ka har'a probe ke 185 x 1000 = 185,000 mA = 185 A ha ho khethoa 1 mV/A range.)
• Bakeng sa ho nepahala ho hoholo, qoba ho ba haufi ha li-conductors tse ling tse ka bakang lerata ha ho khoneha.

Malebela a ho Etsa Litekanyo Tse Nepahetseng

• Ha u sebelisa probe ea hona joale e nang le meter, ke habohlokoa ho khetha mefuta e fanang ka tharollo e molemo ka ho fetisisa. Ho hloleha ho etsa sena ho ka baka liphoso tsa tekanyo.
• Etsa bonnete ba hore libaka tse kopanyang mohlahare oa probe ha li na lerōle le tšilafalo. Litšila li baka likheo tsa moea pakeng tsa mehlahare, ho eketsa phetoho ea mohato pakeng tsa mathomo le a bobeli. E bohlokoa haholo bakeng sa ho lekanya matla.

TLHOKOMELO

Tlhokomediso

• Bakeng sa tlhokomelo sebelisa feela likarolo tsa pele tse ncha.
• Ho qoba ho tsukutloa ke motlakase, seke oa leka ho etsa ts'ebeletso efe kapa efe sesebelisoa ntle le haeba o tšoaneleha ho etsa joalo.
• Ho qoba ts'oaetso ea motlakase le / kapa tšenyo ea sesebelisoa, u se ke ua lumella metsi kapa baemeli ba tsoang linaheng tse ling ho kopana le probe.

Ho hloekisa
Ho netefatsa tshebetso e ntlafetseng, ho bohlokwa ho boloka sebaka sa ho nyalana ha mohlahare se hlwekile ka dinako tsohle. Ho hloleha ho etsa joalo ho ka baka phoso ho bala. Ho hloekisa mehlahare ea probe, sebelisa pampiri ea lehlabathe e ntle haholo (hantle 600) ho qoba ho phunya mohlahare ebe u hloekisa ka bonolo ka lesela le nang le oli e bonolo.

TS'OATSO E TS'OA

O tlameha ho iteanya le Setsi sa rona sa Tshebeletso bakeng sa nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore, ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa.

Romella ho:

Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
15 Faraday Drive • Dover, NH 03820 USA
Mohala: 800-945-2362 (Ext. 360) • 603-749-6434 (Ext. 360)
Fax: 603-742-2346 • E-mail: repair@aemc.com

(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)

ELA HLOKO: O tlameha ho fumana CSA# pele o khutlisa sesebelisoa leha e le sefe.

THUSO TS'OANELO

Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe mabapi le ts'ebetso e nepahetseng kapa ts'ebeliso ea sesebelisoa sa hau, ka kopo letsetsa, e-mail kapa fekse sehlopha sa rona sa ts'ehetso ea tekheniki:
Ikopanye le: Chauvin Arnoux®, Inc. dba AEMC® Instruments

Mohala: 800-945-2362 (Ext. 351) kapa 603-749-6434 (Ext. 351)
Fax: 603-742-2346 • E-mail: techsupport@aemc.com

TIISETSO MOEKETSI

Probe ea hajoale e netefalitsoe ho mong'a eona nako ea lilemo tse peli ho tloha ka letsatsi leo e rekiloeng ka lona khahlano le liphoso tse entsoeng. Tiisetso ena e fokolang e fanoa ke
AEMC® Instruments, eseng ke morekisi eo e rekiloeng ho eena. Tiisetso ena ha e na letho haeba yuniti e bile tampe entsoe, e hlekefelitsoe, kapa haeba sekoli se amana le tšebeletso e sa etsoang ke AEMC® Instruments.

Tšireletso e felletseng ea waranti le ngoliso ea sehlahisoa e fumaneha ho rona websebaka ho:
www.aemc.com/warranty.html.

Ka kopo, hatisa Boitsebiso ba Tšireletso ea Tiisetso ea Marang-rang bakeng sa lirekoto tsa hau.

---

LBH

P: A na nka sebelisa probe ea hajoale libakeng tse metsi?

K: Tjhe, ho eletswa ho se sebedise probe dibakeng tse metsi jwalo ka ha ho boletswe ditemosong tsa polokeho.

P: Ke lokela ho etsa eng haeba ke fumana mapatso ka tlung ea probe?

K: Se ke oa sebelisa probe haeba u fumana mapatso ka har'a thapo ea ntlo kapa ea tlhahiso. Ikopanye le tšehetso ea bareki bakeng sa thuso e eketsehileng.

P: Na ho bolokehile ho clamp haufi le li-conductor tse se nang letho kapa libara tsa libese?

A: E-ba hlokolosi haholo ha clampho pota-pota li-conductor kapa maballo a libese joalokaha ho boletsoe karolong ea mehato ea tšireletso.

Litokomane / Lisebelisoa

AEMC Instruments SR759 AC Current Probe [pdf] Bukana ea Mosebelisi SR759, SR759 AC Current Probe, SR759, AC Current Probe, Current Probe, Probe

Litšupiso

• Bukana ea Mosebelisi