Tlhahisoleseding ya Sehlahiswa

AC Current Probe Model JM861 ke sensor ea hajoale e sebelisetsoang ho lekanya AC hona joale lits'ebetsong tsa motlakase. E entsoe ka li-insulation tse habeli kapa tse matlafalitsoeng bakeng sa polokeho e eketsehileng. The probe e arotsoe ka CAT III, ho bontša hore tlhokomeliso e lokela ho sebelisoa ha clampho pota-pota li-conductor tse se nang letho kapa maballo a libese. Probe ea hajoale e na le matšoao a machaba a motlakase a bonts'ang likarolo tsa eona tsa polokeho le tataiso ea ts'ebeliso. Ho bohlokoa ho sebelisa feela likarolo tse ncha tse boletsoeng ke feme ha u sebeletsa sesebelisoa. AC Current Probe Model JM861 ke mofuta oa sensor ea hajoale ea A, e lumellang ts'ebeliso ho potoloha le ho tlosoa ho li-conductor tsa HAZARDOUS LIVE.

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Pele o sebelisa AC Current Probe Model JM861, sheba bukana ea mosebelisi bakeng sa litaelo tse felletseng le mehato ea polokeho.
2. Ha clampHa u ntse u hlahloba li-conductors tse se nang letho kapa maballo a libese, e-ba hlokolosi haholo ho thibela likotsi tsa motlakase.
3. Netefatsa hore o tseba matshwao a matjhaba a motlakase a sebediswang probe le ho utlwisisa ditlhaloso tsa ona.
4. Ha ho etsoa litšebeletso kapa ho lokisoa, kamehla sebelisa likarolo tse ncha tse boletsoeng ke feme ho boloka polokeho le ts'ebetso ea sesebelisoa.
5. Ha o sebelisa probe, latela mekhahlelo ea litekanyo e hlalositsoeng bukeng ea mosebelisi. AC Current Probe Model JM861 e arotsoe ka CAT III.
6. Bakeng sa litekanyo tse entsoeng phepelong ea motlakase ea mantlha, sheba litataiso tsa sehlopha sa tekanyo ea CAT IV.
7. Kamehla tlosa le ho sebelisa probe ka hloko ho pota-pota li-conductors tsa HAZARDOUS LIVE, ho latela litataiso tse fanoeng bukeng ea mosebelisi.

AC Probe ea Hona joale
Setšoantšo sa JM861
Bukana ea Mosebelisi

TLHALOSO

JM861 (Catalog #2110.90) e etselitsoe ho sebelisoa libakeng tsa indasteri. Mehlahare e "squared" e lumella li-conductor tse ngata kapa sebaka sa libese. Model JM861 e lekanya ka nepo liforomo tsa maqhubu a AC 'me e na le tlhahiso e lekanang ea mV bakeng sa ho bala ka kotloloho ho li-oscilloscopes. Swichi ya dilaete ya maemo a mararo hodima motshwaro e kgetha mefuta. Model JM861 e fana ka thapo e insulated 6.5 ft. coaxial e nang le sehokelo sa insulated BNC se lekantsoeng 600Vrms 'me e tsamaisana le AC voltmeter efe kapa efe, multimeter, kapa matla a mang.tagSesebelisoa sa ho metha sa e se nang le tšitiso e kholo ho feta 1M, 47 pF. Ho finyella ho nepahala ho boletsoeng, sebelisa JM861 e nang le voltmeter e nang le ho nepahala ha 0.75% kapa ho feta.

TLHOKOMELO
Litemoso tsena tsa polokeho li fanoa ho netefatsa polokeho ea basebetsi le ts'ebetso e nepahetseng ea sesebelisoa.

• Bala bukana ea litaelo ka botlalo 'me u latele lintlha tsohle tsa polokeho pele u leka ho sebelisa kapa ho sebeletsa sesebelisoa sena.
• E-ba hlokolosi mabapi le potoloho efe kapa efe: Ho ka etsahala hore e phahametagmaqhubu le maqhubu a teng 'me a ka baka kotsi e tšosang.
• Bala karolo ea Litlhaloso tsa Tšireletso pele u sebelisa probe ea hajoale. Le ka mohla u se ke ua feta palo e kholotaglintlha tse fanoeng.
• Tšireletseho ke boikarabello ba motho ea sebetsang.
• KAMEHLA hokela probe ea hajoale ho sesebelisoa sa ponts'o pele ho clampho etsa lipatlisiso holim'a sample ntse le lekoa.
• LEkola lisebelisoa, probe, probe cable, le li-terminals pele o sebelisoa. Tlosa likarolo leha e le life tse nang le bothata hang-hang.
• LE KA mohla u se ke ua sebelisa probe ea hona joale ho li-conductors tsa motlakase tse behiloeng ka holimo ho 600V ka overvolvetagsehlopha sa III (CAT III). Eba hlokolosi haholo ha clampho pota-pota li-conductor tse se nang letho kapa maballo a libese.

LITŠOANTŠISO TSA MOHLASE

• Letšoao lena le bolela hore probe ea hona joale e sirelelitsoe ke ho pata habeli kapa ho matlafatsoa. Sebelisa feela likarolo tse ncha tse boletsoeng ke feme ha u sebeletsa sesebelisoa.
• Letšoao lena le bolela TLHOKOMELISO! mme o kopa hore mosebelisi a bue ka bukana ea mosebelisi pele a sebelisa sesebelisoa.
• Ena ke sensor ea hona joale ea mofuta oa A. Letšoao lena le bolela hore kopo e haufi le ho tlosoa ho li-conductor tsa HAZARDOUS LIVE e lumelletsoe.

TLHALOSO EA MEKHATLO EA LEKOLO

CAT IV: Bakeng sa litekanyo tse etsoang phepelong ea mantlha ea motlakase (<1000V) joalo ka lisebelisoa tsa mantlha tsa ts'ireletso ea overcurrent, li-ripple control unit, kapa limithara.
CAT III: Bakeng sa litekanyo etsoa mohahong tlhomamiso boemong kabo tse kang ka thepa hardwired ka tlhomamiso e tsitsitseng le breakers potoloho.
CAT II: Bakeng sa litekanyo tse etsoang lipotolohong tse amanang ka kotloloho le sistimi ea kabo ea motlakase.
Examplitekanyo tsa lisebelisoa tsa ntlo kapa lisebelisoa tse nkehang habonolo.

HO FUMANA MOROBE
Ha u fumana thomello ea hau, etsa bonnete ba hore litaba tse ka hare li lumellana le lenane la ho paka. Tsebisa morekisi oa hau ka lintho tse sieo. Haeba thepa e bonahala e senyehile, file tleleime hang-hang le mofani oa thepa le ho tsebisa mofani oa hau hang-hang, ho fana ka tlhaloso e qaqileng ea tšenyo leha e le efe.

LIEKETSENG MOTLATSI

Boemo ba Hona Joale:
1 ho 30A AC potoloho e tsoelang pele; 90 Tlhōrō ho ea holimo
1 ho 300A AC potoloho e tsoelang pele; 900 Tlhōrō ho ea holimo
1 ho 2400A AC potoloho e tsoelang pele; 9000 Tlhōrō ho ea holimo
1 ho isa ho 2400A AC potoloho e tsoelang pele bakeng sa mefuta e felletseng ea mocheso (3000A haeba mocheso o le <35°C kapa 95°F)

Lets'oao la Tlhahiso:
10 mV AC/A AC (0.3V at 30A)
1 mV AC/A AC (0.3V at 300A)
0.1 mV AC/A AC (0.3V at 3000A)

Ho nepahala le Mokhahlelo
Shift*:
30 A RANGE

Boemo ba pele	1.5A	6A	30A
Ho nepahala %	2% ± 1 mV
Phetoho ea mohato	20°	10°	5°

300 A RANGE

Boemo ba pele	15A	60A	300A
Ho nepahala %	2% ± 0.5 mV
Phetoho ea mohato	3°	1.5°	1°

3000 A RANGE

Boemo ba pele	150A	600A	3000A
Ho nepahala %	2% ± 0.2 mV
Phetoho ea mohato	3°	1.5°	1°

(*Maemo a litšupiso: 23 ° C ± 3 ° K, 20 ho 85% RH, 48 ho 65 Hz, matla a khoheli a ka ntle <40 A/m, ha ho karolo ea DC, ha ho na mokhanni ea jereng ea ka ntle, liteko sample centered.)

• Loaro impedance ≥ 1MΩ, 47 pF.
• Ho nepahala: Ho latela IEC 185
• Ampere Sehlahisoa sa Bobeli: 90 AS
• Marang-rang: 10 ho isa ho 50 kHz; derating ea hona joale ka holimo ho 5 kHz bakeng sa tšebeliso e tsoelang pele
• Tšitiso ea Meroalo: 1 MΩ, 47 pF
• Sebetsa Voltage: 600V AC
• Mokhoa o Tloaelehileng Moqtagematla: 600V AC
• Tšusumetso ea Mokhanni ea Haufi: 0.005A/A AC
• Tšusumetso ea Mokhanni ha a bula mohlahare: 1% ± 0.1A ea ho bala
• Tšusumetso ea Maqhubu ho tloha ho 10Hz ho isa ho 10kHz: 1 dB maemong ohle
• Tšusumetso ea DC Moqtage: 0.05% ka A DC

LIEKETSENG MOCHA

• Mocheso oa Ts'ebetso: 14° ho isa ho 122°F (-10° ho isa ho 50°C)
• Mocheso oa Polokelo. -40° ho isa ho 176°F (-40° ho isa ho 80°C)
• Tšusumetso ea Mocheso: <0.1% ka 10°K
• Ho Bula Mohlahare: 3.54" (90mm)

Boholo bo Holimo ba Kondari:

• Cable: 2.52" boholo. (64mm)
• Sebaka sa libese: 1.97 x 5.31″ ​​(50 x 135mm) 2.52 x 3.94″ (64 x 100mm)
• Tšireletso ea Enfelopo: IP 20 (IEC 529)
• Teko ea ho oa: 500 limilimithara (IEC 68-2-32)
• Mechanical Shock: 100 g (IEC 68-2-27)
• Tšisinyeho: 10/55/10 Hz, 0.15 mm (IEC 68-2-6)

Lintho tse entsoeng ka polycarbonate:

• E tšoara: 10% fiberglass e qosoa
• polycarbonate UL 94 V0
• Mehlahare: ABS UL94 V2
• Boholo: 4.72 x 12.40 x 1.89″ (120 x 315 x 48 mm)
• Boima ba 'mele: Liponto tsa 2.65 (1200 g)
• Mebala: Matšoafo a bohlooho bo lefifi ka mehlahare e khubelu
• Sephetho: Insulated 6.5 ft. (2 m) cable ea coaxial e nang le sehokelo sa insulated BNC se fuoeng lintlha tse 600V rms.

TS'IRELETSO TS'OANE
Motlakase:
Ho kenya letsoho habeli kapa ho matlafatsoa ho tiisa lipakeng tsa mochini oa mantlha kapa oa bobeli le oa kantle ho IEC 1010-2-32
Mokhoa o Tloaelehileng Moqtage: 600V CAT III, Tšilafalo: 2

TAELO TSEBISO

• Probe ea hajoale JM861 …………………. Katse #2110.90

Lisebelisoa:
Sehokelo sa Banana/BNC XF-SS

• (4 mm plug ea banana) ………………….. Katse #2111.32

TS'EBETSO

Ka kopo etsa bonnete ba hore u se u balile le ho utloisisa ka botlalo karolo ea TEMOSO leqepheng la 1.
Ho etsa Litekanyo ka AC Current Probe Model JM861

• Hokela litheminale tse ntšo le tse khubelu ho mofuta oa Volt AC oa DMM kapa voltagsesebelisoa sa ho metha. Khetha molumo o nepahetsengtage range. Haeba boholo ba hona joale bo sa tsejoe, khetha sebaka se phahameng ka ho fetisisa (3000A AC / 3V AC) ho probe ea switjha e teng ka har'a mofeng. Clamp sebono se pota-potileng conductor se lokelang ho lekoa. Haeba 'malo o le ka tlase ho 300mV kapa 30mV, khetha sebaka se tlase ho fihlela u fumana qeto e nepahetseng. Bala ponts'o ea boleng ho DMM (ho mV) 'me u e arole ka mefuta e khethiloeng. (Haeba ho bala = 2.59V ho 10mV AC/A AC range, hona joale ho phallang ka probe ke 2590mV ÷ 10 = 259A AC).
• Bakeng sa ho nepahala ho hoholo: ka hloko beha sekontiri ka har'a mohlahare oa probe, qoba ha ho khoneha, ho ba haufi le li-conductors tse ling tse ka bakang lerata.
  Malebela a ho Etsa Litekanyo tse Nepahetseng
• Ha u sebelisa probe ea hona joale e nang le meter, ke habohlokoa ho khetha mefuta e fanang ka tharollo e molemo ka ho fetisisa. Ho hloleha ho etsa sena ho ka baka liphoso tsa tekanyo.
• Etsa bonnete ba hore libaka tse kopanyang mohlahare oa probe ha li na lerōle le tšilafalo. Litšila li baka likheo tsa moea pakeng tsa mehlahare, ho eketsa phetoho ea mohato pakeng tsa mathomo le a bobeli. E bohlokoa haholo bakeng sa ho lekanya matla.

TLHOKOMELO:

Tlhokomediso

• Bakeng sa tlhokomelo sebelisa feela likarolo tsa pele tse ncha.
• Ho qoba ho tsukutloa ha motlakase, seke oa leka ho etsa litšebeletso leha e le life ntle le haeba o na le tokelo ea ho etsa joalo.
• Ho qoba ts'oaetso ea motlakase le / kapa tšenyo ea sesebelisoa, u se ke ua kenya metsi kapa lisebelisoa tse ling tsa kantle ho probe.

Ho hloekisa:
Ho netefatsa tshebetso e ntlafetseng, ho bohlokwa ho boloka sebaka sa ho nyalana ha mohlahare se hlwekile ka dinako tsohle. Ho hloleha ho etsa joalo ho ka baka phoso ho bala. Ho hloekisa mehlahare ea probe, sebelisa pampiri ea lehlabathe e ntle haholo (e ntle 600) ho qoba ho senya mohlahare, ebe u hloekisa ka bonolo ka lesela le nang le oli e bonolo.

TS'OATSO E TS'OA
O tlameha ho ikopanya le Setsi sa rona sa Tshebeletso bakeng sa nomoro ya Tumello ya Tshebeletso ya Bareki (CSA#). Sena se tla etsa bonnete ba hore ha sesebelisoa sa hau se fihla, se tla lateloa le ho sebetsoa hang-hang. Ka kopo, ngola CSA# ka ntle ho sejana sa thepa.
Chauvin Arnoux®, Inc. dba AEMC® Lisebelisoa
15 Faraday Drive Dover, NH 03820 USA
800-945-2362 (Ext. 360) • 603-749-6434 (Ext. 360) • repair@aemc.com
(Kapa ikopanye le mophatlalatsi oa hau ea lumelletsoeng)

HLOKOMELA: Bareki bohle ba tlameha ho fumana CSA # pele ba khutlisa sesebelisoa leha e le sefe.

THUSO LE THEKISO
Haeba u na le mathata afe kapa afe a tekheniki, kapa u hloka thuso efe kapa efe ka tšebeliso e nepahetseng kapa ts'ebeliso ea sesebelisoa sena, ka kopo ikopanye le mohala oa rona oa tekheniki:
800-945-2362 (Ext. 351) • 603-749-6434 (Ext. 351) • techsupport@aemc.com

TIISETSO MOEKETSI

Probe ea hajoale e netefalitsoe ho mong'a nako ea lilemo tse 2 ho tloha ka letsatsi la theko ea mantlha khahlano le liphoso tse entsoeng. Tiisetso ena e lekanyelitsoeng e fanoa ke AEMC® Instruments, eseng ke morekisi eo e rekiloeng ho eena. Tiisetso ena ha e na letho haeba yuniti e bile tampe entsoe, e hlekefelitsoe kapa haeba sekoli se amana le ts'ebeletso e sa etsoang ke AEMC® Instruments.
Tšireletso e felletseng ea waranti le ngoliso ea sehlahisoa e fumaneha ho rona websebaka ho: www.aemc.com/warranty.html.
Ka kopo, hatisa Boitsebiso ba Tšireletso ea Tiisetso ea Marang-rang bakeng sa lirekoto tsa hau.