Washing Machine Control Board Instruction Manual

Selelekela

This manual provides essential information for the safe and effective installation and maintenance of your new replacement washing machine control board. This control board is designed for specific Samsung washing machine models, restoring their original functionality. Please read this manual thoroughly before attempting any installation or service.

Boitsebiso ba Tšireletseho

• ALWAYS disconnect power to the washing machine before attempting any installation, repair, or maintenance. Failure to do so can result in serious injury or death from electrical shock.
• If you are not comfortable performing electrical repairs, it is highly recommended to seek assistance from a qualified technician.
• Wear appropriate personal protective equipment (PPE), such as gloves and safety glasses, during installation.
• Ensure all connections are secure and correctly matched to prevent damage to the control board or the washing machine.
• Keep the control board dry and away from moisture.

Litaba tsa Sephutheloana

Sephutheloana sa hau se tlameha ho ba le lintlha tse latelang:

• 1 x Washing Machine Control Board (MFS-XQB4888-05 or compatible variant)

Litlhaloso

Ho seta le ho Kenya

Replacing a washing machine control board requires careful attention to detail. If you are unsure about any step, please consult a professional appliance technician.

1. Hakolla Matla: Unplug the washing machine from the electrical outlet and turn off the circuit breaker supplying power to the appliance.
2. Kena ho Boto ea Taolo: Depending on your washing machine model, you may need to remove the top panel, back panel, or control console to access the existing control board. Refer to your washing machine's specific service manual for detailed access instructions.
3. Likhokahano tsa Tokomane: Before disconnecting any wires, take clear photos of all wiring connections to the old control board. This will serve as a crucial reference for reconnecting the new board. Pay attention to the color and position of each wire.
4. Disconnect Wires and Remove Old Board: Carefully disconnect all wire harnesses and individual wires from the old control board. Unfasten any screws or clips holding the old board in place and remove it.
5. Install New Control Board: Position the new control board in the same location as the old one. Secure it with the original screws or clips.
6. Kopanya Wiring hape: Using your photos as a guide, carefully reconnect all wire harnesses and individual wires to the corresponding terminals on the new control board. Ensure each connection is firm and secure.
7. Reassemble Washing Machine: Once all connections are verified, reattach any panels or consoles that were removed.
8. Mosebetsi oa Teko: Plug the washing machine back into the electrical outlet and turn on the circuit breaker. Perform a test cycle to ensure all functions are operating correctly.

Litaelo tsa Ts'ebetso

This control board is a replacement component designed to restore the original functionality of your Samsung washing machine. Once correctly installed, operate your washing machine according to its original user manual. The control board itself does not require separate operation; it manages the washing machine's cycles and functions as intended by the manufacturer.

Tlhokomelo

The control board is a sealed electronic component and generally requires no routine maintenance. To ensure its longevity:

• Boloka mochini o hlatsoang liaparo sebakeng se omileng ho thibela tšenyo ea mongobo likarolong tsa elektroniki.
• Etsa bonnete ba hore ho na le moea o nepahetseng ho potoloha sesebelisoa.
• If the washing machine requires cleaning, always disconnect power first and use a damp cloth, avoiding direct spraying of water onto control panels or electronic areas.

Ho batle phoso

If your washing machine experiences issues after installing the new control board, consider the following general troubleshooting steps:

• No Power/Machine Not Starting:
  • Check if the washing machine is properly plugged into a working outlet.
  • Netefatsa hore sekhechana sa potoloho ha sea khoptjoa.
  • Ensure all wire connections to the control board are secure and correctly seated.
• Likhoutu tsa Liphoso li Bontšitsoe:
  • Refer to your washing machine's original user manual for the meaning of specific error codes.
  • Some error codes might indicate issues with other components, not necessarily the control board itself.
• Mesebetsi e Ikhethang e sa Sebetseng:
  • Double-check the wiring for the affected function on the control board.
  • Ensure the corresponding sensors or actuators are properly connected and functioning.
• Mathata a Nako le Nako:
  • Loose connections can cause intermittent problems. Re-check all wiring.
  • Ensure the board is securely mounted and not vibrating excessively.

If troubleshooting steps do not resolve the issue, it is advisable to contact a qualified appliance repair technician or the seller for further assistance.

Malebela a mosebelisi

• Before starting the replacement, take a photo of the old board's wiring. This is the most common tip for successful DIY repairs.
• Ensure the new board's model number matches your washing machine's requirements precisely to avoid compatibility issues.

Warranty le Tšehetso

For information regarding warranty coverage or technical support, please contact the seller or your point of purchase. Keep your purchase receipt or order details handy when contacting support.