ADVANTECH MIO-2375 Board Computers Bukana ea Mosebelisi

Tlhokomeliso 1: Ho fumana lintlha tse ling mabapi le MIO-2375, sheba Advantech websaete bakeng sa tlhaiso-leseling e batsi.
Tlhokomeliso 2: Acrobat Reader e hlokahala ho view PDF efe kapa efe

Litlhaloso

Kakaretso

CPU:
- Intel® i7-1185G7E/1185GRE quad-core, base frequency 1.8 GHz, max. turbo frequency 4.4 GHz
- Intel® i5-1145G7E quad-core, base frequency 1.5 GHz; max. turbo frequency 4.1 GHz
- Intel® i3-1115G4E dual-core, base frequency 2.2 GHz; max. turbo frequency 3.9 GHz

Memori ea Sisteme
- Likanale tse peli, ka har'a LDDR4x @ 4267 MHz, ho fihla ho 32 GB

Cache
- Intel® i7-1185G7E/1185GRE: 12 MB
- Intel® i5-1145G7E: 8 MB
- Intel® i3-1115G4E: 6 MB
BIOS: AMI uEFI 256 Mbit
Watchdog Timer: Linako tse 255 tsa nako, tse hlophisitsoeng ka software; WDT ea maemo a mangata (e hlophisitsoeng ka iManager)

Betri: Lithium 3 V/210 mAH
Molumo: Molumo oa tlhaloso e phahameng (HD), Line-In, Line-Out, Mic-In

Sebopeho sa Katoloso

1 x M.2 B-Key 2242/3042 (M-Key e fumaneha ha o e kopa)
1 x M.2 E-Key 2230

Pontšo

Molaoli: Intel® Iris® Xe Graphics
Qeto e phahameng:
- Pontšo ea Port: DP 1.4 (DP ++), ho fihla ho 4096 x 2304 x 36 bpp @ 60 Hz; ka DSC 7680 x 4320 x 30 bpp @ 60 Hz
- Embedded DisplayPort: eDP 1.4 HBR3, ho fihla ho 4096 x 2304 x 36 bpp @ 60 Hz; ka DSC 7680 x 4320 x 30 bpp @ 60 Hz
- Ho ikhethela MIPI-DSI: MIPI-DSI 2.5 GHz, ho fihla ho 3200 x 2000 x 24 bpp @ 60 Hz; ka DSC 5120 x 3200 x 24 bpp @ 60 Hz
- Pontšo e habeli: DP + eDP/MIPI-DSI

Ethernet Interface

Lebelo: 10/100/1000 Mbps
Mookameli: GbE1 - Intel i219, GbE2 - Intel i210-AT

Mechanical le Tikoloho

Litekanyo: 100 x 72 mm/3.9 x 2.8 in
Mofuta oa Phepelo ea Matla: E tšehetsa ACPI
Litlhoko tsa Matla: +12 V ± 10% (e tšehetsa sehokelo sa matla sa 2-pin AT le jack ea DC joalo ka kamehla)
Thempereichara ea ho Sebelisa: 0 ~ 60 °C/32 ~ 140 °F E Eketsehile: -40 ~ 85 °C/-40 ~ 185 °F

Boima ba 'mele: 0.26 lik'hilograma / 0.57 lb

Jumpers le lihokelo

Boto e na le li-jumpers tse 'maloa tse lumellang sistimi hore e hlophisoe ho latela ts'ebeliso. Mosebetsi oa jumper le sehokelo se seng le se seng se thathamisitsoe ka tlase.

Li-Jumpers
Label	Mosebetsi
SW1	Automatic Power On Setting
EA-1-VDD	LCD Power Setting

Lihokelo
Label	Mosebetsi
CN1	Phanele e ka pele
CN2	GPIO
CN3	I2C
CN4	Fan
CN5	Matla a DC a kene
Betri1	RTC betri
EDP1	eDP
BL1	Motlakase oa motlakase oa inverter
DP1	DP ++
USB1	USB2.0+3.2
USB3	USB ea ka hare
M2_1	M.2 E-key
M2_2	M.2 B/M-key
SIM1	Nano SIM
LAN1	RJ45_2x1_W/XFMR&LED
SATA1	SATA_7V
Audio1	Audio
COM1	COM1
COM2	COM2

Li-Jumpers le Lihokelo (Tsoelang Pele)

SW1	Automatic Power On Setting
Tlhophiso	Mosebetsi
(1-8) ho ea pele	AT mode (ea kamehla)
(1-8) theoha	Mokhoa oa ATX
(3-6) ho ea pele	Hlakola CMOS
(3-6) theoha	Tlwaelehileng (boloka CMOS)
(2-7) (4-5)	Teko feela

Kenya li-Defaults tsa BIOS

Mohato oa 1: Tlosa sesebelisoa
Mohato oa 2: Tsamaisa switch ea DIP ho tloha Position 3 ho ea ho 6, ebe u kenya matla sesebelisoa

Mohato oa 3: Fumana BIOS 'me u behe litlhophiso tsa kamehla (u se ke ua hlakola nako kapa u hlakole CMOS) Tsoha ho hopotsa basebelisi ho koala sesebelisoa ebe u tsamaisa switch ea DIP ho tloha Position 6 ho ea 3.
Mohato oa 4: Qala hape sesebelisoa

Hlakola CMOS

Tlosa betri (betri 1) Sistimi e tla emisa metsotsoana ea 3, e bonts'a liphoso tsa checksum, 'me e hlakise nako.

EA-1-VDD	LCD Matla
Tlhophiso	Mosebetsi
(1-3)	+3.3V (ea kamehla)
(3-5)	+5V
(3-4)	+12V

Tlhokomeliso: Khomphuta e fana ka potoloho ea oache ea nako ea sebele e tsamaisoang ke betri. Libetri li kotsing ea ho phatloha ha li nkeloa sebaka ka phoso. Fetola feela ka mofuta o tšoanang kapa o lekanang joalo ka ha o khothalelitsoe ke moetsi. Lahla libeteri tse sebelisitsoeng ho latela litaelo tsa moetsi.