ADJ WiFly NE1 Wireless DMX Controller 

Bukana ea Mosebelisi

© 2022 ADJ Lihlahisoa, LLC litokelo tsohle li sirelelitsoe. Tlhahisoleseling, litlhaloso, litšoantšo, litšoantšo le litaelo tse mona li ka fetoha ntle le tsebiso. Letšoao la ADJ Products, LLC le ho khetholla mabitso le linomoro tsa lihlahisoa mona ke matšoao a khoebo a ADJ Products, LLC. Ts'ireletso ea litokelo tsa litokelo e koptjoa e kenyelletsa mefuta eohle le litaba tsa thepa e nang le litokelo tsa molao le tlhaiso-leseling eo hona joale e lumelloang ke molao kapa molao oa boahloli kapa o fanoeng kamora moo. Mabitso a lihlahisoa tse sebelisitsoeng tokomaneng ena e kanna ea ba matšoao a khoebo kapa matšoao a khoebo a ngolisitsoeng lik'hamphaning tsa bona mme ka hona lia ananeloa. Lihlahisoa tsohle tse seng tsa ADJ Products, LLC le mabitso a lihlahisoa ke matšoao a khoebo kapa matšoao a khoebo a ngolisitsoeng a lik'hamphani tsa bona.

Lihlahisoa tsa ADJ, LLC 'me lik'hamphani tsohle tse ikopantseng li hana mekoloto efe kapa efe bakeng sa thepa, lisebelisoa, meaho le lits'enyehelo tsa motlakase, likotsi ho batho leha e le bafe, le tahlehelo ea moruo e tobileng kapa e sa tobang e amanang le ts'ebeliso kapa ts'episo ea tlhahisoleseling efe kapa efe e teng ka har'a tokomane ena, le/kapa joalo ka ka lebaka la kopano e sa lokelang, e sa bolokehang, e sa lekaneng le e bohlasoa, ho kenya, ho ringoa le ho sebetsa ha sehlahisoa sena.

ADJ PRODUCTS LLC Ntlo-khōlō ea Lefatše
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
Mohala: 800-322-6337 | Fax: 323-582-2941 | www.adj.com |tšehetso@adj.com

ADJ Supply Europe BV
Junostraat 2 | 6468 EW Kerkrade | Netherlands
Mohala: +31 45 546 85 00 | Fax: +31 45 546 85 99 | www.americandj.eu | service@americandj.eu

Tsebiso ea ho Boloka Matla a Europe
Litaba tsa ho Boloka Matla (EuP 2009/125/EC)
Ho boloka matla a motlakase ke senotlolo sa ho thusa ho sireletsa tikoloho. Ka kopo tima lihlahisoa tsohle tsa motlakase ha li sa sebelisoe. Ho qoba tšebeliso ea matla ka mokhoa o sa sebetseng, tlosa lisebelisoa tsohle tsa motlakase motlakaseng ha o sa sebelisoe. Kea leboha!

TOKOMANA TS'OANE

Ka lebaka la likarolo tse ling tsa sehlahisoa le/kapa lintlafatso, mofuta o ntlafalitsoeng oa sena tokomane e ka fumaneha inthaneteng.

ka kopo, netefatsa www.adj.com bakeng sa ntlafatso/ntlafatso ea morao-rao ea bukana ena pele qala ho kenya le/kapa ho etsa mananeo.

LINTLHA TSE AKARETSANG

LIEKETSENG

Ka kopo bala le ho utloisisa litaelo tsohle tse bukeng ena ka hloko le ka hloko pele u leka ho sebelisa lihlahisoa tsena. Litaelo tsena li na le lintlha tsa bohlokoa tsa polokeho le ts'ebeliso.

PHAHLOLA

Lihlahisoa tse ka har'a kit ena li lekoa ka botlalo 'me li rometsoe ka mokhoa o phethahetseng oa ts'ebetso. Sheba ka hloko lebokose la thomello bakeng sa tšenyo e ka 'nang eaba e etsahetse nakong ea thomello. Haeba lebokose le bonahala le senyehile, hlahloba ka hloko yuniti e 'ngoe le e 'ngoe e kenyellelitsoeng bakeng sa tšenyo 'me u netefatse hore lisebelisoa tsohle tse hlokahalang bakeng sa ho sebetsa li fihlile li ntse li le teng. Haeba ts'enyehelo e fumanoe kapa likarolo tse ling li le sieo, ka kopo ikopanye le sehlopha sa rona sa ts'ehetso ea bareki bakeng sa litaelo tse ling. Ka kopo u se ke ua khutlisetsa khithi ena ho morekisi oa hau ntle le ho ikopanya le tšehetso ea bareki pele ho nomoro e thathamisitsoeng ka tlase. Ka kopo u se ke ua lahla lebokose la thomello ka har'a lithōle. Ka kopo, sebelisa hape ha ho khoneha.

TIISETSO PUSELETSO

Lintho tsohle tse khutlisetsoang litšebeletso ebang li tlas'a waranti kapa che, li tlameha ho lefshoa esale pele 'me li tsamaee le nomoro ea tumello ea ho khutlisa (RA). Nomoro ea RA e tlameha ho ngoloa ka ho hlaka ka ntle ho sephutheloana sa ho khutlisa. Tlhaloso e khuts'oane ea bothata hammoho le nomoro ea RA le eona e tlameha ho ngoloa pampiring ebe e kenngoa ka har'a setshelo sa likepe. Haeba yuniti e le tlasa waranti, o tlameha ho fana ka kopi ea bopaki ba invoice ea theko. Lintho tse khutlisetsoang ntle le nomoro ea RA e tšoailoeng ka ho hlaka ka ntle ho sephutheloana li tla hanoa 'me li khutlisetsoe ka litšenyehelo tsa moreki. U ka fumana nomoro ea RA ka ho ikopanya le tšehetso ea bareki.

LIMITED WARRANTY (USA FEELA)

A. ADJ Products, LLC e fana ka tumello ho moreki oa mantlha, lihlahisoa tsa ADJ Products, LLC hore li se be le mathata a ho etsa thepa le moetso oa nako e behiloeng ho tloha ka letsatsi la theko (sheba nako e itseng ea tiisetso ka morao). Tiisetso ena e tla sebetsa ha feela sehlahisoa se rekoa ka hare ho United States of America, ho kenyeletsoa thepa le libaka. Ke boikarabello ba mong'a ntlo ho theha letsatsi le sebaka sa theko ka bopaki bo amohelehang, ka nako eo tšebeletso e batloang ka eona.
B. Bakeng sa tšebeletso ea tiisetso, o tlameha ho fumana nomoro ea Return Authorization (RA#) pele o romela sehlahisoa-ka kopo ikopanye le ADJ Products, LLC Service Department ho 800-322-6337. Romella sehlahisoa feela fekthering ea ADJ Products, LLC. Litefiso tsohle tsa ho romella li tlameha ho lefuoa esale pele. Haeba litokiso kapa litšebeletso tse batloang (ho kenyeletsoa le ho khutlisa likarolo) li le ka har'a lipehelo tsa tiisetso ena, ADJ Products, LLC e tla lefa litefiso tsa ho tsamaisa thepa sebakeng se itseng feela sa United States. Haeba sesebelisoa sohle se rometsoe, se tlameha ho romelloa ka har'a sephutheloana sa sona sa pele. Ha ho lisebelisoa tse lokelang ho romelloa le sehlahisoa. Haeba lisebelisoa life kapa life li romelloa le sehlahisoa, ADJ Products, LLC e ke ke ea ba le mokoloto oa tahlehelo kapa tšenyo ea lisebelisoa tse joalo, kapa bakeng sa ho khutlisa ka mokhoa o sireletsehileng.
C. Tiisetso ena ha e na letho ha nomoro ea serial e fetotsoe kapa e tlositsoe; haeba sehlahisoa se fetotsoe ka tsela efe kapa efe eo ADJ Products, LLC e phethelang ka eona, kamora tlhahlobo, e ama ho ts'epahala ha sehlahisoa, haeba sehlahisoa se lokisitsoe kapa litšebeletso ke mang kapa mang ntle le feme ea ADJ Products, LLC ntle le haeba tumello e ngotsoeng pele e fuoe moreki. ka ADJ Products, LLC; haeba sehlahisoa se senyehile hobane se sa hlokomeloe hantle joalokaha ho boletsoe bukeng ea litaelo.
D. Sena ha se khokahano ea litšebeletso, 'me tiisetso ena ha e kenyelletse tlhokomelo, ho hloekisa kapa ho hlahloba nako le nako. Nakong e boletsoeng ka holimo, ADJ Products, LLC e tla nkela likarolo tse nang le bothata ka litšenyehelo tsa eona ka likarolo tse ncha kapa tse nchafalitsoeng, 'me e tla amohela litšenyehelo tsohle bakeng sa tšebeletso ea tumello le mosebetsi oa ho lokisa ka lebaka la bofokoli ba thepa kapa mosebetsi. Boikarabello bo le bong ba ADJ Products, LLC tlas'a tiisetso ena bo tla lekanyetsoa feela ho lokisa sehlahisoa, kapa ho se nkela sebaka, ho kenyeletsoa likarolo, ho ea ka qeto ea ADJ Products, LLC. Lihlahisoa tsohle tse koahetsoeng ke tiisetso ena li entsoe ka mor'a August 15, 2012, 'me li na le matšoao a khethollang ho etsa joalo.
E. ADJ Products, LLC e na le tokelo ea ho etsa liphetoho moralong le/kapa lintlafatso holim'a lihlahisoa tsa eona ntle le tlamo ea ho kenyelletsa liphetoho tsena lihlahisoa life kapa life tse entsoeng.
F. Ha ho waranti, ebang e hlalositsoe kapa e fanoe, kapa e etsoa mabapi le lisebelisoa life kapa life tse fanoeng ka lihlahisoa tse hlalositsoeng ka holimo. Ntle le moo ho thibetsoeng ke molao o sebetsang, litiisetso tsohle tse boletsoeng ke ADJ Products, LLC mabapi le sehlahisoa sena, ho kenyeletsoa le litiisetso tsa thekiso kapa boikoetliso, li lekantsoe ka nako ho fihlela nakong ea tiisetso e boletsoeng ka holimo. 'Me ha ho liwaranti, ebang li hlalositsoe kapa li fanoe, ho kenyeletsoa le litiisetso tsa thekiso kapa boleng, tse tla sebetsa sehlahisoa sena kamora hore nako e boletsoeng e felile. Tharollo ea moreki le/kapa Morekisi e tla ba tokiso kapa phapanyetso e fanoeng ka holimo; 'me tlas'a maemo leha e le afe ADJ Products, LLC e tla ikarabella bakeng sa tahlehelo kapa tšenyo efe kapa efe, ka kotloloho kapa ka lebaka, e bakiloeng ke ts'ebeliso ea, kapa ho se khone ho sebelisa sehlahisoa sena.
G. Tiisetso ena ke yona feela tiisetso e ngotsweng e sebetsang ho ADJ Products, LLC Products mme e nka sebaka sa ditiisetso tsohle tsa pele le ditlhaloso tse ngotsoeng tsa melawana le dipehelo tsa tiisetso tse phatlaladitsweng mona.

LIEKETSENG TIISETSO NAKO

• Lihlahisoa tse se nang Lebone la LED = selemo se le seng (matsatsi a 1) Tiisetso e Lekanyelitsoeng (Joalo ka: Mabone a Khethehileng, Mabone a Bohlale, Mabone a UV, Li-Strobes, Mechini ea Moholi, Mechini ea Bubble, Li-Mirror Balls, Par Cans, Trussing, Lighting Stands joalo-joalo ntle le LED le l.amps)
• Lihlahisoa tsa Laser = Selemo se 1 (Matsatsi a 365) Tiisetso e Lekanyelitsoeng (ha e kenyeletse diode tsa laser tse nang le waranti e lekantsoeng ea likhoeli tse 6)
• Lihlahisoa tsa LED = lilemo tse 2 (matsatsi a 730) Tiisetso e Lekanyelitsoeng (ntle le libeteri tse nang le waranti e lekanyelitsoeng ea matsatsi a 180)
  Tlhokomeliso: Tiisetso ea Lilemo tse 2 e sebetsa feela ho reka ka hare ho United States.
• StarTec Series = Tiisetso e Lekanyelitsoeng ea Selemo se 1 (ntle le libeteri tse nang le waranti e lekanyelitsoeng ea matsatsi a 180)
• Bolaoli ba ADJ DMX = Selemo sa 2 (Matsatsi a 730) Waranti e lekantsoeng

Sesebelisoa sena ke sengoathoana se tsoetseng pele sa lisebelisoa tsa elektroniki. Ho netefatsa ts'ebetso e bonolo, ho bohlokoa ho latela litaelo le litataiso tsohle tse bukeng ena. ADJ PRODUCTS, LLC. ha e na boikarabello bakeng sa kotsi le/kapa tshenyo e bakilweng ke tshebediso e mpe ya sesebediswa sena ka lebaka la ho se natse tlhahisoleseding e hatisitsweng bukeng ena. Ke likarolo tsa mantlha tse kenyellelitsoeng le/kapa lisebelisoa tsa sesebelisoa sena feela tse lokelang ho sebelisoa. Liphetoho life kapa life ho sesebelisoa, tse kenyellelitsoeng le/kapa lisebelisoa li tla hlakola waranti ea pele ea moetsi le ho eketsa kotsi ea tšenyo le/kapa kotsi ea motho.

SIRELETSO Class 1 – SESEBETSI SE TSHWANETSE HO HLOLWA KA NTLE

U SE KE UA LEKELA HO SEBELISA SESEBETSI SENA U NTLE U SEBELISE KA HO PHETHAHETSENG HO SEBELISA ENA. TŠEBELETSO EFE KAPA DITOKISO TSA SESEBETSI ENA KAPA LITABA TSE LING TSE LAOLANG KE SESEBETSI SENA KA SEBELISA TŠEBELETSO E FOSAHETSENG, LE/KGOTSA HO HLOKOLA TSELAETSO LE TSHEBETSO TSA TOKOMANE ENA E HLAKOLA TSELA EO OBSIDIAN E SE KE UA SEBELISA, LE HO HLOMELA LITABA TSA TŠEBELETSO LE HO SEBELISA TOKOMANE ENA. /KGOTSA O LOKISA, MME O KA HLAKOLA TIISETSO YA SESEBETSI sefe kapa sefe sa tsamaiso eo e seng ya OBSIDIAN. BOLOKA LISEBETSI TSE HLAHANG HO LE HOLE LE SESEBETSI.

LIBAKA TSE OMELENG SEBELISA FEELA!
U SE KE UA IPOLELA SESEBETSI HO PULELA, MONGOLA, LE/GOPA TIKOLOHO E TEI!
U SE KE UA TŠELA METSI LE/GOPA METSI HO HOLA KAPA KA HO SESEBETSI!

QOBA ho tshoara ka matla ha o tsamaisa kapa o sebetsa.
SE KE OA pepesa karolo efe kapa efe ya sesebelisoa ho bula lelakabe kapa mosi. Beha sesebelisoa hole le mehloli ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
SE KE OA sebelisa sesebedisoa maemong a feteletseng le/kapa a matla.

FEELAVIEW – PELE PELE

 

Tlhokomeliso: Thupa ea USB e ka etsoa bakeng sa FAT16 kapa FAT32.
Tlhokomeliso: E le hore molaoli oa hau a lemohe files, li tlameha ho bolokoa foldareng e bitsoang ADJ-NE1. Sephutheli ha se khone ho ba le lebitso le leng.

FEELAVIEW – PHAnele EA MORAO

LIKAROLOANA

ADJ WiFly NE1 ke taolo ea mesebetsi e mengata e ka sebetsang e le molaoli oa LED hammoho le MIDI e bonolo. Ha o sebetsa joalo katage le molaoli oa mabone, sesebelisoa se na le likarolo tse latelang tsa mantlha:

• 432 Channel DMX Controller
• Laola ho fihlela ho 12 Litlhophiso tsa Motho ka Mong
• Likonopo tse 12 tsa Multi-Function
• 12 Mehopolo ka 2 Banks
• Likonopo tse 6 tsa Mokhoa (Sebopeho, Mmala, Gobo, Effect, Show, & Emisa)
• Mosebetsi oa Master Blackout
• E hahiloeng ka ADJ ea WiFly TransCeiver Wireless DMX
• USB Slot (8GB USB thupa e kenyelelitsoe.)
• Tšireletso ea Password
• Taolo ea Master Dimmer Fader
• Strobe Rate Fader Control

HLOKOMELA DMX

Phepelo ea motlakase: Pele o hokela yuniti ea hau, etsa bonnete ba hore mohloli oa voltage sebakeng sa heno e tsamaisana le molumo o hlokahalangtage bakeng sa ADJ WiFly NE1 ea hau. Sebelisa feela phepelo ea motlakase e kenyellelitsoeng ho matlafatsa WiFly NE1.

EA-512-DMX DMX e khutsufetse bakeng sa Digital Multiplex. Ena ke tatellano e akaretsang e sebelisoang ke baetsi ba mabone le balaoli ba bangata e le mokhoa oa puisano lipakeng tsa lisebelisoa tse bohlale le balaoli. Mookameli oa DMX o romela litaelo tsa data tsa DMX ho tloha ho molaoli ho ea ho lokisa. Lintlha tsa DMX li romelloa e le lintlha tsa serial tse tsamaeang ho tloha ho tse ling ho ea ho tse ling ka DATA "IN" le DATA "OUT" XLR terminals tse fumanehang litsing tsohle tsa DMX (balaoli ba bangata ba na le "terminal" ea DATA "OUT" feela).

Khokahano ea DMX: DMX ke puo e lumellang mefuta eohle le mefuta ea lihlahisoa tse fapaneng hore li hokahane hammoho 'me li sebetse ho tsoa ho molaoli a le mong, ha feela lisebelisoa tsohle le molaoli li lumellana le DMX. Ho netefatsa phetiso ea data ea DMX, ha u sebelisa lisebelisoa tse 'maloa tsa DMX leka ho sebelisa tsela e khuts'oane ka ho fetesisa ea thapo. Tatellano eo lisebelisoa li hoketsoeng moleng oa DMX ha e susumetse DMX aterese. Bakeng sa example; setsi se abetsoeng aterese ea DMX ea 1 se ka behoa kae kapa kae moleng oa DMX, qalong, qetellong, kapa kae kapa kae bohareng. Ka hona, papali ea pele e laoloang ke molaoli e ka ba ea ho qetela ka ketane. Ha sesebelisoa se abeloa aterese ea DMX ea 1, molaoli oa DMX o tseba ho romela DATA e abetsoeng aterese 1 ho yuniti eo, ho sa tsotelehe hore na e teng kae ka har'a ketane ea DMX.

Litlhoko tsa Cable ea Data (DMX Cable) (Bakeng sa Ts'ebetso ea DMX Primary/Secondary): Taolo ea DMX le yuniti e hloka thapo e amohetsoeng ea DMX-512 110 Ohm Data bakeng sa ho kenya data le tlhahiso ea data. Re khothaletsa lithapo tsa Accu-Cable DMX. Haeba u iketsetsa likhoele, etsa bonnete ba hore u sebelisa thapo e sirelelitsoeng ea 110-120 Ohm.

(Thapo ena e ka rekoa hoo e batlang e le mabenkeleng ohle a litsebi tsa melumo le mabone). Lithapo tsa hau li lokela ho etsoa ka sehokelo sa monna le mosali sa XLR pheletsong efe kapa efe ea thapo. Hape hopola hore thapo ea DMX e tlameha ho tlamisoa ka liketane 'me e ke ke ea aroloa.

HLOKOMELA DMX

3-Pin ho 3-Pin Cable

Hlokomela: Ha u iketsetsa likhoele, u se ke ua sebelisa mokotla oa fatše holim'a sehokelo sa XLR. Se ke oa hokela mokhanni oa thebe ea thapo ho mokotla oa fatše, kapa ua lumella mokhanni oa thebe hore a kopane le k'hase ea kantle ea XLR. Ho theola thebe ho ka baka potoloho e khuts'oane le boitšoaro bo sa tsitsang.

Tlhokomeliso e Khethehileng: Ho Felisoa ha Line. Ha ho sebelisoa cable e telele, ho ka 'na ha hlokahala hore u sebelise terminator yuniti ea ho qetela ho qoba boitšoaro bo sa tsitsang. Terminator ke 110-120 ohm 1/4 watt resistor e hoketsoeng lipakeng tsa phini 2 le 3 tsa sehokelo sa monna sa XLR (DATA + le DATA -). Yuniti ena e kentsoe sehokelong sa basali sa XLR sa yuniti ea ho qetela ka har'a ketane ea hau ea daisy ho felisa mohala. Ho sebelisa mochine oa motlakase (ADJ karolo ea nomoro Z-DMX/T) ho tla fokotsa menyetla ea boitšoaro bo sa tsitsang.

3-Pin ho 5-Pin Cable Adapter

Baetsi ba bang ba sebelisa likhoele tsa data tsa 5-pin DMX- 512 bakeng sa phetiso ea DATA sebakeng sa 3-pin. Lisebelisoa tsa 5-pin DMX li ka kengoa tšebetsong moleng oa li-3-pin DMX. Ha u kenya lithapo tsa data tse tloaelehileng tsa 5-pin moleng oa 3-pin adapter ea cable e tlameha ho sebelisoa, li-adapter tsena li fumaneha habonolo mabenkeleng a mangata a motlakase. Grafiken le chate e ka tlase e qaqisa phetoho e nepahetseng ea cable.

HLOKOMELA MOSALI

Beha mocha oa WiFly

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Tobetsa konopo ea DIAL/ENTER ho khetho ea 6 ea menyu (Seta kanale ea wifly). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho seta aterese ea kanale (00 – 14), ebe u tobetsa konopo ea DIAL/ENTER ho netefatsa.
4. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 2 ho tsoa ho menu.

Beha Wifly Power

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 7 (Set WiFly Power). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tlosa mohala oa DIAL/ENTER ho bulela kapa ho TOMA motlakase oa WiFly, ebe o tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 2 ho tsoa ho menu.

TS'EBETSO

RELEBOHILE TŠEBELETSO PROFILES

HLOKOMELA: WiFly NE1 e tla e tletse ka Generic fixture profiles, tse kenyeletsang RGB, RGBW, RGBA, RGBWA, RGB- WAU, TRI-WHITE, 36CH 8-Bit ML (M1), le 36CH 16-Bit ML (M2). Sheba karolo ea chate ea generic fixture traits leqepheng la 18 bakeng sa lintlha tsa mocha. Li-pro tse ling kaofelafiles e ka jarolloa ho tsoa thupeng ea USB, e kenyellelitsoeng. Thupa ea USB e kenyelletsa li-ADJ tse ngatafiles, tse tsamaellanang le molaoli enoa. Hobane the file mabitso a khutsufalitsoe, ka lebaka la mefokolo ea litlhaku, re kopa "Fixture Profile Details” Lenane la PDF ho tšela litšupiso tsa files. Kahoo molaoli oa hau o sebetsa ka lebelo le holimo, ka kopo laela pro feelafiletseo u tla li sebelisa. Boholo ba 65 pro- files ka laeloa ka nako.

1. Ha lilaoli li tima, kenya drive ea USB e kenyellelitsoeng boema-kepeng ba USB ebe u kenya matla HO selaoli.
2. Tobetsa o hatelle konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
3. Khetha khetho ea 1 (Load Light Lib) ka ho tobetsa DIAL/ ENTER daela ebe o tobetsa DIAL/ENTER daela ho fumana pro.file tseo u lakatsang ho li kenya.
4. Hang ha u se u fumane profile, tobetsa konopo ea DIAL/ENTER ho e kenya. Pontšo e tla baleha nakoana "Ts'ebetso e Felletse". Pheta mehato ea 3 le ea 4 ho kenya pro e eketsehilengfiles kapa tobetsa konopo ea ESC/PAGE ho tsoa.

Hlakola Light Lib

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela konopo ea DIAL/ENTER ho khetho ea 2 ea menu (Delete Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho fumana setsebifile eo u lakatsang ho e hlakola kapa khetha "hlakola lib kaofela" ho hlakola profiles. Tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa konopo ea DIAL/ ENTER ho kenya. Tobetsa konopo ea ESC/ PAGE ho tsoa.

Patch Light Lib

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 3 (Patch Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho fumana setsebifile eo u batlang ho e lokisa. Tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa konopo ea (li) tlhophiso, 1-12, eo u lakatsang ho e kopanya pro e khethiloengfile ho le ho bulela DIAL/ ENTER daela ho seta aterese ya ho qala. Tobetsa konopo ea DIAL/ENTER ho kenya. Tobetsa konopo ea ESC/PAGE ho tsoa.

Hlakola Patch Light

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela khetho ea DIAL/ENTER ho khetho ea 4 (Delete Light Patch) ebe u khetha li-fixture(s), 1-12, tseo u lakatsang ho li hlakola patch. Tobetsa konopo ea DIAL/ENTER ho kenya tšebetsong.
3. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Fetola Leseli Lib

Hlokomela: WiFly NE1 e lumella liteishene tsa liteishene hore li behoe bakeng sa liteishene tsa PAN, TILT, COLOR, le GOBO ha profile e ntse e bōptjoa. Haeba u lakatsa ho hlophisa li- defaults tsena kapa ho seta li-default tsa othomathiki bakeng sa likanale tse ling, ke mona moo u etsang sena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Khetha (li)tlhophiso, 1-12, tseo u lakatsang ho li hlophisa. Fetolela ho daela / ENTER ho daela ho khetho ea 5 (Edita Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya. Kenya mohala oa DIAL/ENTER ho khetha sesebelisoa seo u lakatsang ho se fetola. Tobetsa daela DIAL/ENTER ho boloka le ho netefatsa.
3. Fetolela li-dials tsa EFFECT, 1-4, ho lokisa lintlha tse amehang tsa mocha. Kenya mohala oa DIAL/ENTER ho fumana likanale tse ling. Tobetsa daela DIAL/ENTER ho boloka le ho netefatsa.

TS'EBETSO

Boloka Boitsebiso ho USB

Hlokomela: Khetho ena e u lumella ho boloka lintlha tsohle tsa balaoli ba hau ho thupa ea USB e kenyellelitsoeng. Ho fihlela ho data ea 12 files e ka bolokoa thupeng. File mabitso a itlhahisa e le CONFIG01 - CONFIG12.
Tsena file lebitso le ke ke la fetoloa. Haeba li fetotsoe, molaoli a ke ke a li tseba ha u leka ho li kenya.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela konopo ea DIAL/ENTER ho khetho ea 8 (Boloka Lintlha ho USB). Tobetsa konopo ea DIAL/ENTER ho kenya
3. U sebelisa likonopo tsa tšebetso 1-12, khetha ea file konopo eo u lakatsang ho boloka ho eona. Haeba u khetha konopo ea #4, mohlalaample, le file e tla bolokoa thupeng ea USB e le "CONFIG04".

Tlhokomeliso: Haeba u na le konopo ea FUNCTION e tala e benyang, sena se bolela hore u se u ntse u e-na le data e bolokiloeng sebakeng seo. Kahoo haeba u sa batle ho e ngola, u se ke ua khetha konopo e tala e benyang.

Laola data ho tsoa ho USB

Hlokomela: Khetho ena e ka sebelisoa feela haeba u se u ntse u e-na le data e tsoang ho molaoli oa WiFly NE1 e bolokiloeng thupeng ea hau ea USB. Lintlha files e tla hlaha komporong ea hau joalo ka CONFIG01 - CONFIG12. Tsena files e ke ke ea bitsoa bocha. Ho seng joalo, molaoli a ke ke a li tseba.

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 9 (Laola data ho tsoa ho USB). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, khetha file konopo eo u lakatsang ho e kenya khomphuteng ea hau.

Hlokomela: Likonopo tse tala tse benyang FUNCTION li bonts'a hore ho na le data e bolokiloeng moo 'me e teng eo u ka e khethang. Haeba u khetha konopo e sa khanyeng, u tla fumana "Ho hloleha ha Ts'ebetso!" phoso.

Etsa sebopeho sa USB

Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha data eohle e thupeng ea USB e tla hlakoloa. Ho khothaletsoa haholo hore u boloke lithupa tsohle tsa USB files khomphuteng ea hau pele u tsoela pele.

1. Ha lilaoli li tima, kenya thupa ea USB ka har'a lilaoli boema-kepe ba USB 'me u sebelise matla ho molaoli.
2. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
3. Fetolela ho daela ho DIAL/ENTER ho khetho ea 10 ea menyu (Fometa disk ea USB). Tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "YES". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Litlhophiso tsa Strobe

Tlhophiso ena e u lumella ho khetha mokhoa oo konopo ea STROBE e sebetsang ka eona. E u lumella ho khetha pakeng tsa Latch le Flash. Ho khetha Latch ho tla etsa hore konopo ea STROBE e be ON/OFF 'me ho khetha Flash ho tla e etsa ea nakoana, e tšoarelle ha feela o tobetsa konopo.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 11 (Litlhophiso tsa Strobe). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Kenya mohala oa DIAL/ENTER ho khetha pakeng tsa "Latch" le "Flash". Tobetsa konopo ea DIAL/ENTER ho netefatsa khetho ea hau

TS'EBETSO

Hlakola Memori

Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha e tla hlakola mehopolo eohle e bolokiloeng ho likonopo tsa MEMORY 1-12. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho daela ho khetho ea 12 (Tlosa Memori). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Kenya mohala oa DIAL/ENTER ho khetha memori eo u lakatsang ho e hlakola. Tobetsa konopo ea DIAL/ENTER ho kenya tšebetsong.
4. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
5. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Hlakola data kaofela

Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha e tla hlakola data eohle e bolokiloeng ho molaoli oa hau. Lintlha tse hlakotsoeng li tla kenyelletsa litsebi tsohlefiles le konopo ea MEMORY files. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 13 (Hlakola Lintlha Tsohle). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Tlhophiso ea Feme

Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha e tla hlakola lintlha tsohle, mehopolo, 'me e khutlisetse litlhophiso tsohle, ho kenyeletsoa paskhoutu, ho khutlela fekthering ea kamehla. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 14 (Litlhophiso tsa fektheri). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Fetola Passcode

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 15 (Fetola Password). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya phasewete ea hajoale.
4. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu ea hau e ncha ea linomoro tse 'ne, ebe u kenya paskhoutu ea hau e ncha lekhetlo la bobeli ho netefatsa.

TS'EBETSO

Mofuta oa Firmware

Tlhokomeliso: Ena ke khetho ea ho bala feela e tla bonts'a balaoli mofuta oa hajoale oa software.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 16 (Firmware Version). Tobetsa konopo ea DIAL/ENTER ho kenya. Tobetsa konopo ea ESC/PAGE ho tsoa.

Taolo ea Fixture, Saving, & Playing Memories

Hlokomela: Leha e le generic profiles e kanna ea u sebeletsa, ho khothaletsoa hore u jarolle le ho sebelisa pro ea tloaelofiletse fanoeng ho USB sitck e kenyellelitsoeng le molaoli oa hau. Pro e tloaelehilengfiles e ka u fa taolo e eketsehileng le likarolo tseo generic profiles se kenyeletse. Haeba u lakatsa ho sebelisa pro customfiles, ka kopo sheba LOADING FIXTURE PROFILES karolo ea bukana ena ea mosebelisi 'me u li laele pele u tsoela pele. Ka mor'a hore u lokise lisebelisoa tsa hau, u ka laola le ho boloka mehopolo u sebelisa mehato e latelang.

1. Tobetsa konopo ea FIXTURE ebe u khetha li-fixtures, u sebelisa likonopo tsa FUNCTION 1-12, tseo u batlang ho li laola. Haeba u sebelisa li-fixtures tse ngata tsa mofuta o le mong 'me u batla ho li laola ka nako e le' ngoe, u ka tobetsa likonopo tsa pele le tsa ho qetela e le hore lisebelisoa tsohle tse lipakeng li khethoe ka nako e le 'ngoe. Bakeng sa khale- ample, ke kentse lisebelisoa tse 6 ho li-buttons tsa 1-6, ho li khetha kaofela kapele, ke ne ke tla tobetsa likonopo 1 & 6 ka nako e le 'ngoe hore ho khethoe lisebelisoa tsohle tse 6.
2. Tobetsa konopo ea COLOR ebe u eketsa mmala ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ ENTER ho chencha lipakeng tsa maqephe a mabeli a mebala e seng e setiloe (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
3. Tobetsa konopo ea GOBO 'me u kenye gobo ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ ENTER ho chencha lipakeng tsa maqephe a mabeli a li-gobos tse seng li setiloe (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
4. Tobetsa konopo ea EFFECT 'me u kenye sephetho ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ENTER ho fetola lipakeng tsa maqephe a mararo a litlamorao. Pontšong, u tla bona ML EFFECT (bakeng sa mabone a tsamaeang) le RGB EFFECT 1 le RGB EFFECT 2 (bakeng sa RGBWA+UV LED's) hammoho le lebelo, mohato, boholo, le litlhophiso tsa tataiso, tse ka laoloang ho tloha ho tse 'nè tsa EFFECT rotary. dial. O ka emisa sephetho ka nako efe kapa efe ka ho tobetsa konopo ea PAUSE. (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
5. Tobetsa konopo ea SHOW 'me u lumelle pontšo ka ho sebelisa likonopo tsa FUNCTION 1-12. (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
6. Hape o ka seta boleng bohle ba kanale ka bowena. Haeba u se u ntse u beha sebaka sa hau mme u batla ho se boloka. ka kopo sheba mohato oa 7 hona joale. Ho etsa litokiso tsa likanale ka letsoho, tobetsa konopo ea FIXTURE, ebe o tobetsa konopo ea DIAL/ENTER bakeng sa metsotsoana e 'meli, ponts'o e tla thathamisa likanale 1-4 hammoho le boleng ba tsona ba hajoale. Sebelisa li-dial tse 'ne tsa EFFECT ho lokisa kanale e' ngoe le e 'ngoe e thathamisitsoeng skrineng. Likanale li hlahisoa hane ka nako. Ho fihlella dikanale tse ding, bulela DIAL/ENTER daela ho ya ka tshupanako le kgahlano le tshupanako
7. Ho boloka tlhahiso ea hau ea hajoale, tobetsa 'me u hatelle likonopo life kapa life ho tse tšeletseng tsa MEMORY ho fihlela ponts'o e baleha "Operation Complete!". Tobetsa eona konopo ea MEMORY lekhetlo la bobeli ho bapala ho tsoa sebakeng seo sa memori, e lokela ho khantša botala bo tiileng. Pheta mehato ea 1-6 ho boloka mehopolo e meng. Ho na le libanka tse peli tsa memori. Ho fihlella banka ea memori ea bobeli tobetsa konopo ea ESC/PAGE. Haeba ho na le memori e sebetsang, konopo eo ea MEMORY e tla khanya ho u tsebisa hore e sebetsa ka mafolofolo bankeng e 'ngoe. Haeba mohopolo oa hau o kenyelletsa "EFFECT", o ka emisa phello ka ho tobetsa konopo ea PAUSE.
8. O ka kenya konopo ea STROBE ka nako efe kapa efe nakong ea ho bapala. Konopo ea STROBE e tla sebetsa ho latela maemo a fader a STROBE RATE. Ho fetola fader ea hau ea STROBE RATE ho tla u fa taolo ea DMX holim'a shutter ea hau kapa liteishene tsa RGBWA+UV. Ts'ebetso ena e ke ke ea bolokoa mohopolong.
9. U ka khona ho fetola sefahla sa MASTER DIMMER ka nako efe kapa efe nakong ea ho bapala ho theha matla a akaretsang bakeng sa lisebelisoa tse sebetsang. Ts'ebetso ena e ke ke ea bolokoa mohopolong.

TS'ELISO TŠEBELE

Ho etsa ntlafatso ea software, latela litaelo tse ka tlase:

1. Kenya software e ntlafalitsoeng ho drive ea USB. Ho lokela ho ba le foldara e nang le lebitso "ADJ-NE1" e nang le software file e nang le sehlooho se reng "ADJ-NE1.SUP". Ho khothalletsoa ho ba le drive ea USB e se nang letho files ntle le software file.
2. Tima matla a mantlha a yuniti, 'me u hokele USB ka software e ntlafalitsoeng boema-kepeng ba USB ba yuniti.
3. Tobetsa o hatelle likonopo tsa Memory 3, Memory 4, le Seta ha o ntse o bulela yuniti matla hape. Lentsoe "LOAD" le tla hlahisoa skrineng, 'me yuniti e tla qala ho khoasolla software e ntlafalitsoeng.
4. Skrine e tla u khothalletsa hore u qale yuniti ha download e felile. Matlafatsa yuniti, ebe o e bula hape 'me u ee karolong ea tlhaiso-leseling ea software ho menu ea sistimi ho netefatsa hore nomoro ea mofuta oa software e ntlafalitsoe.

Tlhokomeliso: Linomoro tsa mofuta oa software 1.0 ho isa ho 1.2 li khona ho bala li-drive tsa USB tse fihlang ho 1GB ka boholo. Software version 1.4 e khona ho bala USB flash drives ho fihlela ho 8GB, le software version 2.0 e khona ho bala USB flash drive ho fihlela ho 16GB.

KAKARETSO LITS'OANELO

MOEKETSI PROFILE LITŠOANTŠISO

LIEKETSENG TS'OANELO

Likaroloana:

• 432 channel DMX Controller e nang le ADJ's WiFLY Transceiver Wireless DMX ka botong. (E ka boela ea khoasoa ka thata ka likhoele tsa 3-pin DMX)
• E etselitsoe Inno Series le RGB, RGBW, RGBA, RGBWA le RGBWA+UV LED's empa e ka laola boholo ba lihlahisoa tsa DMX tse nang le liteishene tse 36 kapa ka tlase ho moo.
• Jenereithara ea litlamorao e hahelletsoeng ka har'a mabone a tsamaeang le li-LED
• Laola ho fihla ho lipapali tse 12 tsa batho ka bomong
• 12 Mehopolo ka 2 Banks
• Li-Encoders tse 4 tsa Rotary bakeng sa Channel & Taolo ea Mosebetsi
• Taolo ea Master Dimmer Fader
• Strobe Rate Fader Control
• Likonopo tsa 6 Mode (Sebopeho, Mmala, Gobo, Effect, Show, & Emisa)
• 12 Likonopo tsa Multi-Function
• Konopo ea Blackout
• Boema-kepe ba USB Bokahohle (Sethupa sa USB se kenyelelitsoe)

Lintlha tsa Tech:

• Sehokelo sa tlhahiso ea DMX: 3-pin XLR
• Motlakase oa Matla: 9-12V DC min 300mA UL Phepelo e amohelehang ea Matla (E kenyelelitsoe)
• Tšebeliso ea matla: 2.7 Watts
• Boholo: 12.8" x 7.25" x 2.75" (325 x 185 x 68.7mm)
• Boima ba 'mele: 4.4 lbs. (2 lik'hilograma)

Litokomane / Lisebelisoa

ADJ WiFly NE1 Wireless DMX Controller [pdf] Bukana ea Mosebelisi WiFly NE1, Wireless DMX Controller, WiFly NE1 Wireless DMX Controller

Litšupiso

• Bukana ea Mosebelisi