ADJ WiFly NE1 Battery DMX Controller Manual

LINTLHA TSE AKARETSANG

Ho phutha
Rea leboha ka ho reka Battery ea WiFly NE1 ka ADJ Products, LLC. Sesebelisoa se seng le se seng se lekoa ka botlalo 'me se rometsoe ka mokhoa o phethahetseng oa ts'ebetso. Sheba ka hloko lebokose la thomello bakeng sa tšenyo e ka 'nang eaba e etsahetse nakong ea thomello. Haeba lebokose le bonahala le senyehile, hlahloba ka hloko sesebelisoa sa hau bakeng sa tšenyo leha e le efe 'me u netefatse hore lisebelisoa tsohle tse hlokahalang ho sebetsa yuniti li fihlile li ntse li le teng. Haeba tšenyo e fumanoe kapa likarolo li le sieo, ka kopo ikopanye le nomoro ea rona ea tšehetso ea bareki mahala bakeng sa litaelo tse ling. Ka kopo u se ke ua khutlisetsa unit ena ho morekisi oa hau ntle le ho ikopanya le tšehetso ea bareki pele

Selelekela
WiFly NE1 Battery ke kanale ea 432, selaoli sa DMX se tsamaisoang ke betri se nang le taolo ea ADJ's WiFly le DMX ka mohala oa DMX o hahelletsoeng ka hare kapa thapo e thata ea 3-pin DMX. Taolo ena e etselitsoe RGB, RGBW, RGBA, RGBWA, le RGBWA + UV LED units. Selaoli se kenyelletsa pro e kentsoeng esale pelefiles bakeng sa lisebelisoa tse ngata tse oelang sehlopheng se ka holimo

 

Litaelo Kakaretso
Ho ntlafatsa ts'ebetso ea sehlahisoa sena, ka kopo bala litaelo tsena tsa ts'ebetso ka hloko e le hore u tloaelane le ts'ebetso ea mantlha ea yuniti ena. Litaelo tsena li na le lintlha tsa bohlokoa tsa polokeho mabapi le tšebeliso le tlhokomelo ea yuniti ena. Ka kopo boloka bukana ena le yuniti bakeng sa tšebeliso ea nako e tlang.

LIKAROLOANA

• 432 Channel DMX Controller
• Khetho ea Battery e Matla
• Betri e ka tlosoang/e ka nkeloang sebaka
• Mokhoa oa ho Boloka Matla
• Laola ho fihlela ho 12 Litlhophiso tsa Motho ka Mong
• Likanale tse 15 tse fapaneng tsa seea-le-moea
• Likonopo tse 12 tsa Multi-Function
• 12 Mehopolo ka 2 Banks
• Li-Encoders tse 4 tsa Rotary bakeng sa Channel & Taolo ea Mosebetsi
• Likonopo tse 6 tsa Mokhoa (Sebopeho, Mmala, Gobo, Effect, Show, & Emisa)
• Mosebetsi oa Master Blackout
• ADJ's WiFly TransCeiver Wireless DMX
• USB Slot (8GB USB thupa e kenyelelitsoe.)
• Tšireletso ea Password
• Taolo ea Master Dimmer Fader
• Strobe Rate Fader Control

NGOLISISO SEHLAHLENG

Betri ea WiFly NE1 e na le tiisetso e lekanyelitsoeng ea selemo se le seng (matsatsi a 1). Ka kopo, tlatsa karete ea tiisetso e kentsoeng ho netefatsa theko ea hau le tiisetso. U ka boela ua ngolisa sehlahisoa sa hau inthaneteng ho rona web sebaka: www.adj.com. Lintho tsohle tse khutlisetsoang litšebeletso, ebang li tlas'a waranti kapa che, li tlameha ho lefshoa esale pele 'me li tsamaee le nomoro ea tumello ea ho khutla (RA). Haeba yuniti e le tlasa tiisetso, o tlameha ho fana ka kopi ea bopaki ba invoice ea theko. Ka kopo ikopanye le tšehetso ea bareki ea ADJ Products, LLC bakeng sa nomoro ea RA.

LIMITED WARRANTY (USA FEELA)

A)ADJ Products, LLC e fana ka tumello ho moreki oa mantlha, lihlahisoa tsa ADJ Products, LLC hore li se be le mathata a ho etsa thepa le moetso oa nako e behiloeng ho tloha ka letsatsi la theko (sheba nako e itseng ea tiisetso ka morao). Tiisetso ena e tla sebetsa ha feela sehlahisoa se rekoa ka hare ho United States of America, ho kenyeletsoa thepa le libaka. Ke boikarabello ba mong'a ntlo ho theha letsatsi le sebaka sa theko ka bopaki bo amohelehang, ka nako eo tšebeletso e batloang ka eona.
B. Bakeng sa tšebeletso ea tiisetso, o tlameha ho fumana nomoro ea Return Authorization (RA#) pele o romela sehlahisoa ka kopo ikopanye le ADJ Products, LLC Service Department ho 800-322-6337. Romella sehlahisoa feela fekthering ea ADJ Products, LLC. Litefiso tsohle tsa ho romella li tlameha ho lefuoa esale pele. Haeba litokiso kapa litšebeletso tse batloang (ho kenyeletsoa le ho khutlisa likarolo) li le ka har'a lipehelo tsa tiisetso ena, ADJ Products, LLC e tla lefa litefiso tsa ho tsamaisa thepa sebakeng se itseng feela sa United States. Haeba sesebelisoa sohle se rometsoe, se tlameha ho romelloa ka har'a sephutheloana sa sona sa pele. Ha ho lisebelisoa tse lokelang ho romelloa le sehlahisoa. Haeba lisebelisoa life kapa life li romelloa le sehlahisoa, ADJ Products, LLC e ke ke ea ba le mokoloto oa tahlehelo kapa tšenyo ea lisebelisoa tse joalo, kapa bakeng sa ho khutlisa ka mokhoa o sireletsehileng.
C. Tiisetso ena ha e na letho ha nomoro ea serial e fetotsoe kapa e tlositsoe; haeba sehlahisoa se fetotsoe ka tsela efe kapa efe eo ADJ Products, LLC e phethelang ka eona, kamora tlhahlobo, e ama ho ts'epahala ha sehlahisoa, haeba sehlahisoa se lokisitsoe kapa tšebeletso ke mang kapa mang ntle le feme ea ADJ Products, LLC ntle le haeba tumello e ngotsoeng pele e fuoe moreki. ka ADJ Products, LLC; haeba sehlahisoa se senyehile hobane se sa hlokomeloe hantle joalokaha ho boletsoe bukeng ea litaelo.
D. Sena ha se khokahano ea litšebeletso, 'me tiisetso ena ha e kenyelletse tlhokomelo, ho hloekisa kapa ho hlahloba nako le nako. Nakong e boletsoeng ka holimo, ADJ Products, LLC e tla nkela likarolo tse nang le bothata ka litšenyehelo tsa eona ka likarolo tse ncha kapa tse nchafalitsoeng, 'me e tla amohela litšenyehelo tsohle bakeng sa tšebeletso ea tumello le mosebetsi oa ho lokisa ka lebaka la bofokoli ba thepa kapa mosebetsi. Boikarabello bo le bong ba ADJ Products, LLC tlas'a tiisetso ena bo tla lekanyetsoa feela ho lokisoa ha sehlahisoa, kapa ho se nkela sebaka, ho kenyeletsoa likarolo, ho latela boikhethelo ba ADJ Products, LLC. Lihlahisoa tsohle tse koahetsoeng ke tiisetso ena li entsoe ka mor'a August 15, 2012, 'me li na le matšoao a khethollang ho etsa joalo.
E. ADJ Products, LLC e na le tokelo ea ho etsa liphetoho moralong le/kapa lintlafatso lihlahisoa tsa eona ntle le tlamo ea ho kenyelletsa liphetoho tsena lihlahisoa life kapa life tse entsoeng ka hona.
F. Ha ho waranti, ebang e hlalositsoe kapa e fanoe, e fanoa kapa e etsoa mabapi le lisebelisoa life kapa life tse fanoeng ka lihlahisoa tse hlalositsoeng ka holimo. Ntle le moo ho thibetsoeng ke molao o sebetsang, litiisetso tsohle tse fanoeng ke ADJ Products, LLC mabapi le sehlahisoa sena, ho kenyeletsoa le litiisetso tsa thekiso kapa boikoetliso, li lekantsoe ka nako ho fihlela nakong ea tiisetso e boletsoeng ka holimo. 'Me ha ho liwaranti, ebang li hlalositsoe kapa li fanoe, ho kenyeletsoa le litiisetso tsa thekiso kapa boleng, tse tla sebetsa sehlahisoa sena kamora hore nako e boletsoeng e felile. Tharollo ea moreki le/kapa Morekisi e tla ba tokiso kapa phapanyetso e fanoeng ka holimo; 'me tlas'a maemo leha e le afe ADJ Products, LLC e tla ikarabella bakeng sa tahlehelo kapa tšenyo efe kapa efe, ka kotloloho kapa ka lebaka, e bakiloeng ke ts'ebeliso ea, kapa ho se khone ho sebelisa, sehlahisoa sena.
G. Tiisetso ena ke eona feela tiisetso e ngotsoeng e sebetsang ho ADJ Products, LLC Products mme e nka sebaka sa litiisetso tsohle tsa pele le litlhaloso tse ngotsoeng tsa lipehelo le lipehelo tsa tiisetso tse phatlalalitsoeng mona.

LIEKETSENG TIISETSO NAKO

• Lihlahisoa tseo e seng tsa Lebone la LED = 1-year (matsatsi a 365) Tiisetso e Lekanyelitsoeng (joalo ka: Mabone a Khethehileng, Mabone a bohlale, mabone a UV, Strobes, Mechini ea Moholi, Mechini ea Li-bubble, Libolo tsa Seipone, Li-Par Cans, Trussing, Lighting Stands joalo-joalo ntle le LED le lamps)
• Lihlahisoa tsa Laser = Selemo se 1 (Matsatsi a 365) Tiisetso e Lekanyelitsoeng (ha e kenyeletse li-laser diode tse nang le tiisetso e lekanyelitsoeng ea likhoeli tse 6)
• Lihlahisoa tsa LED = lilemo tse 2 (matsatsi a 730) Tiisetso e Lekanyelitsoeng (ho sa kenyeletsoe libeteri tse nang le tiisetso e lekantsoeng ea matsatsi a 180) Hlokomela: Tiisetso ea Lilemo tse 2 e sebetsa feela ho reka ka hare ho United States.
• StarTec Series = Tiisetso e Lekanyelitsoeng ea Selemo se 1 (ntle le libeteri tse nang le waranti e lekanyelitsoeng ea matsatsi a 180)
• Bolaoli ba ADJ DMX = Selemo sa 2 (Matsatsi a 730) Waranti e lekantsoeng

TS'IRELETSO MATS'ELA

Sesebelisoa sena ke sengoathoana se tsoetseng pele sa lisebelisoa tsa elektroniki. Ho netefatsa ts'ebetso e bonolo, ho bohlokoa ho latela litaelo le litataiso tsohle tse bukeng ena. ADJ PRODUCTS, LLC. ha e na boikarabello bakeng sa kotsi le/kapa tshenyo e bakilweng ke tshebediso e mpe ya sesebediswa sena ka lebaka la ho se natse tlhahisoleseding e hatisitsweng bukeng ena. Ke likarolo tsa mantlha tse kenyellelitsoeng le/kapa lisebelisoa tsa sesebelisoa sena feela tse lokelang ho sebelisoa. Liphetoho life kapa life ho sesebelisoa, tse kenyellelitsoeng le/kapa lisebelisoa li tla hlakola waranti ea pele ea moetsi le ho eketsa kotsi ea tšenyo le/kapa kotsi ea motho.

SIRELETSO Class 1 – SESEBETSI SE TSHWANETSE HO HLOLWA KA NTLE
U SE KE UA LEKA HO SEBELISA SESEBETSI SENA U SA SEBELISA KA HO PHETHAHETSENG HO SEBELISA ENA. TŠEBELETSO EFE KAPA EFE KAPA LITOATSO TSA SESEBETSI ENA KAPA LITABA TSE FELENG TSE LAOLANG KE SESEBETSI SENA KA SEBELISA TŠEBELETSO E NEPAHETSENG, LE/KGOTSA HO HLOKOLA TŠEBELETSO LE TSHEBETSO TSA TOKOMANE ENA E HLAKOLA TLHOKOMELISO EA MOHLAhisi LE TEBELLO LE TLHOKOMELISO EA MOHLAhisi. LOKISA, MME O KA HLAKOLA TIISETSO EA SESEBETSI SE EFELENG SE ETSANG KE BAHHI BA BANG. BOLOKA LINTLHA TSE HLAHANG HO LE HOLE LE SESEBETSI

LIBAKA TSE OMELENG SEBELISA FEELA! U SE KE UA IPOLELA SESEBETSI HO PULELA, MONGOLA, LE/GOPA TIKOLOHO E TEI! U SE KE UA TŠELA METSI LE/GOPA METSI HO HOLA KAPA KA HO SESEBETSI!

QOBA ho tshoara ka matla ha o tsamaisa kapa o sebetsa.
SE KE OA pepesa karolo efe kapa efe ya sesebelisoa ho bula lelakabe kapa mosi. Beha sesebelisoa hole le mehloli ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
SE KE OA sebelisa sesebedisoa maemong a feteletseng le/kapa a matla.

HLOKOMELA DMX

Phepelo ea motlakase: Pele o hokela yuniti ea hau, etsa bonnete ba hore molumotage ea mohloli oa matla e tsamaisana le molumo o hlokahalangtage bakeng sa sesebelisoa sa hau. Sebelisa motlakase o kenyellelitsoeng feela

EA-512-DMX DMX e khutsufetse bakeng sa Digital Multiplex. Ena ke protocol ea bokahohleng e sebelisoang ke bahlahisi ba bangata ba mabone le ba laolang e le mokhoa oa puisano pakeng tsa lisebelisoa tse bohlale le balaoli. Molaoli oa DMX o romela litaelo tsa data tsa DMX ho tloha ho molaoli ho ea ho sebopeho. Lintlha tsa DMX li romelloa e le lintlha tsa serial tse tsamaeang ho tloha ho tse ling ho ea ho tse ling ka DATA "IN" le DATA "OUT" XLR terminals tse fumanehang litsing tsohle tsa DMX (balaoli ba bangata ba na le "terminal" ea DATA "OUT" feela).

Khokahano ea DMX: DMX ke puo e lumellang mefuta eohle le mehlala ea bahlahisi ba fapaneng ho hokahana le ho sebetsa ho tsoa ho molaoli a le mong, ha feela lisebelisoa tsohle le molaoli li lumellana le DMX. Ho netefatsa phetisetso e nepahetseng ea data ea DMX, leka ho sebelisa tsela e khuts'oane ka ho fetesisa ea cable ha o hokahanya lisebelisoa tse 'maloa tsa DMX. Tatelano eo lisebelisoa li hokahaneng ka eona moleng oa DMX ha e ame aterese ea DMX. Bakeng sa mohlalaample, setsi se abetsoeng aterese ea DMX ea 1 se ka behoa kae kapa kae moleng oa DMX: qalong, qetellong, kapa kae kapa kae bohareng. Ka hona, papali ea pele e laoloang ke molaoli e ka ba ea ho qetela ka ketane. Ha sesebelisoa se abeloa aterese ea DMX ea 1, molaoli oa DMX o tseba ho romela DATA e abetsoeng aterese 1 ho yuniti eo, ho sa tsotelehe hore na e teng kae ka har'a ketane ea DMX.

Litlhoko tsa Cable ea Data (DMX Cable) (Bakeng sa Ts'ebetso ea DMX Primary/Secondary): Taolo le yuniti ena ea DMX e hloka thapo e amohetsoeng ea DMX-512 110 Ohm Data bakeng sa ho kenya data le tlhahiso ea data. Re khothaletsa lithapo tsa Accu-Cable DMX. Haeba u iketsetsa likhoele, etsa bonnete ba hore u sebelisa thapo e sirelelitsoeng ea 110-120 Ohm. (Thapo ena e ka rekoa hoo e batlang e le mabenkeleng ohle a litsebi tsa melumo le mabone). Lithapo tsa hau li lokela ho etsoa ka sehokelo sa monna sa XLR pheletsong e 'ngoe le sehokelo sa basali sa XLR ka lehlakoreng le leng. Hape hopola hore thapo ea DMX e tlameha ho tlamisoa ka liketane 'me e ke ke ea aroloa.

3-Pin ho 3-Pin Cable
Tlhokomeliso: Ha u iketsetsa lithapo, u se ke ua sebelisa mokotla oa fatše holim'a sehokelo sa XLR. Se ke oa hokela mokhanni oa thebe ea thapo ho mokotla oa fatše, kapa ua lumella mokhanni oa thebe hore a kopane le k'hase ea kantle ea XLR. Ho theola thebe ho ka baka potoloho e khuts'oane le boitšoaro bo sa tsitsang

Keletso e khethehileng: Pheliso ea Mola. Ha lithapo tse telele li sebelisoa, ho ka 'na ha hlokahala hore u sebelise terminator yuniti ea ho qetela ho qoba boitšoaro bo sa tsitsang. Terminator ke 110-120 ohm 1/4 watt resistor e hoketsoeng lipakeng tsa phini 2 le 3 tsa sehokelo sa monna sa XLR (DATA + le DATA -). Yuniti ena e kentsoe sehokelong sa basali sa XLR sa yuniti ea ho qetela ka har'a ketane ea hau ea daisy ho felisa mohala. Ho sebelisa mochine oa motlakase (ADJ karolo ea nomoro ea Z-DMX/T) ho tla fokotsa menyetla ea boitšoaro bo sa tsitsang.

DMX512 terminator e fokotsa liphoso tsa matšoao, e qoba tšitiso e ngata ea ponts'o ea matšoao. Hokela PIN 2 (DMX-) le PIN 3 (DMX+) ea mofuta oa ho qetela letotong le nang le 120 Ohm, 1/4 W Resistor ho felisa DMX512.

3-Pin ho 5-Pin Cable Adapter
Baetsi ba bang ba sebelisa likhoele tsa data tsa 5-pin DMX- 512 bakeng sa phetiso ea DATA sebakeng sa 3-pin. Lisebelisoa tsa 5-pin DMX li ka kengoa tšebetsong moleng oa li-3-pin DMX ka ho sebelisa adaptara ea thapo. Li-adapter tsena li fumaneha habonolo mabenkeleng a mangata a lisebelisoa tsa elektroniki. Grafiken le chate e ka tlase e qaqisa phetoho e nepahetseng ea cable.

MOLAOLI LE MESEBETSI

1. WIFLY ANTENNA - Sena se sebelisetsoa ho romela lets'oao la WiFly wireless DMX ho lihlahisoa tse tsamaellanang tsa WiFly.
2. EFFECT ROTARY KNOBS - Li-knobs tsena li sebelisetsoa ho lokisa liteishene tsa ho lokisa le ho fetola mesebetsi.
3. WIFLY INDICATOR - LED ena e tla bonesa ha lets'oao la WiFly le buletsoe 'me le sebetsa.
4. LCD DISPLAY - E bonts'a mesebetsi eohle ea hajoale le data ea menyu.
5. KOPANO YA HO DAELA/KENYA - Daela ena e sebedisetswa ho phenya hara dikgetho tsa menyetla le ho netefatsa kgetho ka ho e tobetsa. E boetse e sebelisoa ho fihlella mokhoa oa ho laola fixture manual.
6. STROBE RATE FADER - Fader ena e laola mocha oa shutter bakeng sa lisebelisoa tse kenyelletsang mocha oa shutter.
7. USB PORT - Boema-kepe bona ba USB bo sebelisetsoa ho kenya fixture profiles ebe o boloka/kenya memoring files. E tšehetsa boholo ba li-drive tsa USB.Hlokomela: Thupa ea USB e ka etsoa bakeng sa FAT16 kapa FAT32.Hlokomela: E le hore molaoli oa hau a lemohe tsa hau files, li tlameha ho bolokoa foldareng e bitsoang ADJ-NE1B. Sephutheli ha se khone ho ba le lebitso le leng.
8. MASTER DIMMER FADER - Fader ena e laola matla a maholo, hangata a hokelletsoeng ka har'a mocha o lefifi oa sesebelisoa.
9. BUTTON YA BLACKOUT - E kenya tshebetsong/E tima boemo ba ho tima.
10. STROBE BUTTON - Tobetsa konopo ena ho kenya tšebetsong / ho tima strobing bakeng sa lisebelisoa tse khethiloeng.
11. MEMORY 1-6 / 7-12 BUTTONS - E sebelisetsoa ho boloka / ho bapala mehopolo (e ka ba litšoantšo tse tsitsitseng kapa tse tsamaeang).
12. BUTTON EA HO HLOLA - Konopo ena e sebelisetsoa ho kenya le ho tsoa ho menu ea li-setting. U ka tobetsa konopo ena ho view boemo ba betri hape.
13. ESC/PAGE - Konopo ena e sebelisoa ho tsoa ho submenu. Haeba o tobetsa le ho tšoara konopo ena bonyane
14. metsotsoana, tlhahiso eohle e ea ho zero. Konopo ena e boetse e sebelisoa ho chencha lipakeng tsa maqephe a konopo ea memori.
15. FUNCTION BUTTONS 1-12 - Likonopo tsena li na le mesebetsi e mengata ho latela mokhoa o khethiloeng.
16. LIBUTTON TSA MOKHOA - Likonopo tsena li sebelisetsoa ho fetola boemo ba ts'ebetso. Tlhokomeliso: Konopo ea PAUSE e tla emisa feela litlamorao tse sebetsang.

1. BATTERY - Ena ke betri e ka tjhajoang hape. Ho tjhaja betri, hokela feela thapo e kenyeleditsweng ya IEC phepelong ya motlakase e tsamaellanang. Ho kenya betri e 'ngoe, lokolla li-screw tse peli tse tšoarang betri sebakeng sa eona. Tlosa betri kantle butle. Tlosa thapo e hoketsoeng betiring ebe u kenya betri e ncha. Hokela thapo kamoo e neng e le ka teng pele ebe o thellela betri e ncha ka phaposing. TLHOKOMELISO: Betri e ka tjhajoa ka thoko ho yuniti ka ho reka adaptara ea DC. Ka kopo, ikopanye le morekisi ea lumelletsoeng oa ADJ kapa u etele likarolo tsa ADJ websaete bakeng sa tlhaiso-leseling e batsi.
2. DMX OUT - E sebelisoa ho romella lets'oao la DMX ho lisebelisoa tsa LED tse lumellanang.
3. POWER CORD INLET - Thapo ena e etselitsoe ho lumellana le litlhoko tsa motlakase tsa yuniti. Kamehla etsa bonnete ba hore voltage ea mohloli oa matla e tsamaisana le molumo o hlokahalang oa sesebelisoatage. Le ka mohla u se ke ua sebelisa sesebelisoa sena haeba prong ea fatše e tlositsoe kapa e robehile. Sebaka sa fatše se etselitsoe ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase haeba yuniti e na le bothata ba ka hare. FUSE HOLDER - Ntlo ena e boloka 5 amp fuse e sireletsang. Le ka mohla u se ke ua hlola fuse, kaha sena se ka baka tšenyo e kholo ho lisebelisoa tsa elektroniki tsa kahare. Kamehla etsa bonnete ba hore o nkela e cheleng sebaka ka fuse e ncha ea matla a tšoanang, ntle le haeba o bolelloa ka tsela e fapaneng ke setsebi sa tšebeletso sa ADJ se lumelletsoeng.
4. POWER SWITCH - Sebelisa sesebelisoa sena ho tima / ho tima molaoli.

HLASANE HLOMELA 

Beha Wifly Channel

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Tobetsa konopo ea DIAL/ENTER ho khetho ea 6 ea menyu (Seta kanale ea wifly). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho seta aterese ea kanale (00 – 14), ebe u tobetsa konopo ea DIAL/ENTER ho netefatsa.
4. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 2 ho tsoa ho menu.

Beha Wifly Power

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 7 (Set WiFly Power). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tlosa mohala oa DIAL/ENTER ho bulela kapa ho TOMA motlakase oa WiFly, ebe o tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 2 ho tsoa ho menu.

CHELETE LIBETE

Ho tjhaja betri, hokela thapo e kenyelleditsweng ya IEC ho yuniti ebe o hokela thapo ya motlakase mohloling wa matla o tsamaellanang le vollumo e hlokehang ya sesebediswa.tage. Bulela matla a molaoli. Ho hlahloba boemo ba betri, tobetsa konopo ea SET UP kapa u latele litaelo tsa Boemo ba Battery tse thathamisitsoeng karolong ea Ts'ebetso ea bukana ena.

TS'EBETSO

RELEBOHILE TŠEBELETSO PROFILES
HLOKOMELA: WiFly NE1 Battery e tla e tlatsitsoe esale pele ka Generic fixture profiles, tse kenyelletsang RGB, RGBW, RGBA, RGBWA, RGBWAU, TRI-WHITE, 36CH 8-Bit ML (M1), le 36CH 16-Bit ML (M2). Sheba karolo ea Generic Fixture Traits bukeng ena bakeng sa lintlha tsa kananelo. Li-pro tse ling kaofelafiles e ka jarolloa ho tsoa thupeng ea USB, e kenyellelitsoeng. Thupa ea USB e kenyelletsa li-ADJ tse ngatafiles, tse tsamaellanang le molaoli enoa. Hobane the file mabitso a khutsufalitsoe, ka lebaka la mefokolo ea litlhaku, ka kopo sebelisa "Fixture Profile Details” Lenane la PDF ho tšela litšupiso tsa files. Ho etsa bonnete ba hore molaoli oa hau o sebetsa ka lebelo le holimo, ka kopo kenya pro feelafiletseo u tla li sebelisa. Boholo ba 65 profiles ka laeloa ka nako.

1. Ha sesebelisoa sa motlakase se TLOHILE, kenya USB drive e kenyellelitsoeng boema-kepeng ba USB ebe o kenya matla HO selaoli.
2. Tobetsa o hatelle konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
3. Khetha khetho ea 1 (Load Light Lib) ka ho tobetsa DIAL/ ENTER daela ebe o tobetsa DIAL/ENTER daela ho fumana pro.file tseo u lakatsang ho li kenya.
4. Hang ha u se u fumane profile, tobetsa konopo ea DIAL/ENTER ho e kenya. Pontšo e tla baleha nakoana "Ts'ebetso e Felletse". Pheta mehato ea 3 le ea 4 ho kenya pro e eketsehilengfiles kapa tobetsa konopo ea ESC/PAGE ho tsoa.

Hlakola Light Lib

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela konopo ea DIAL/ENTER ho khetho ea 2 ea menu (Delete Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho fumana setsebifile eo u lakatsang ho e hlakola kapa khetha "hlakola lib kaofela" ho hlakola li-profiles. Tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa konopo ea DIAL/ ENTER ho kenya. Tobetsa konopo ea ESC/ PAGE ho tsoa

Patch Light Lib

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 3 (Patch Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Tobetsa konopo ea DIAL/ENTER ho fumana setsebifile eo u batlang ho e lokisa. Tobetsa DIAL/ENTER daela ton Enter.
4. Tobetsa konopo ea (li) tlhophiso, 1-12, eo u lakatsang ho e kopanya pro e khethiloengfile ho le ho bulela daela/ ENTER daela ho seta aterese ya ho qala. Tobetsa konopo ea DIAL/ENTER ho kenya. Tobetsa konopo ea ESC/PAGE ho tsoa

Hlakola Patch Light

1. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela khetho ea DIAL/ENTER ho khetho ea 4 (Delete Light Patch) ebe u khetha li-fixture(s), 1-12, tseo u lakatsang ho li hlakola patch. Tobetsa konopo ea DIAL/ENTER ho kenya tšebetsong.
3. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong

Fetola Leseli Lib
Hlokomela: WiFly NE1 e lumella liteishene tsa liteishene hore li behoe bakeng sa liteishene tsa PAN, TILT, COLOR, le GOBO ha profile e ntse e bōptjoa. Haeba u lakatsa ho fetola litlhophiso tsena kapa ho seta liteishene tse ling, ke mona moo u etsang sena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Khetha (li)tlhophiso, 1-12, tseo u lakatsang ho li hlophisa. Fetolela ho daela / ENTER ho daela ho khetho ea 5 (Edita Light Lib). Tobetsa konopo ea DIAL/ENTER ho kenya. Kenya mohala oa DIAL/ENTER ho khetha sesebelisoa seo u lakatsang ho se fetola. Tobetsa daela DIAL/ENTER ho boloka le ho netefatsa.
3. Fetolela li-dials tsa EFFECT, 1-4, ho lokisa lintlha tse amehang tsa mocha. Kenya mohala oa DIAL/ENTER ho fumana likanale tse ling. Tobetsa daela DIAL/ENTER ho boloka le ho netefatsa

Boloka Boitsebiso ho USB
Hlokomela: Khetho ena e u lumella ho boloka lintlha tsohle tsa balaoli ba hau ho thupa ea USB e kenyellelitsoeng. Ho fihlela ho data ea 12 files e ka bolokoa thupeng. File mabitso a itlhahisa e le CONFIG01 - CONFIG12. Tsena file mabitso a ke ke a fetoloa. Haeba li fetotsoe, molaoli a ke ke a li tseba ha u leka ho li kenya.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela konopo ea DIAL/ENTER ho khetho ea 8 (Boloka Lintlha ho USB). Tobetsa konopo ea DIAL/ENTER ho kenya
3. U sebelisa likonopo tsa tšebetso 1-12, khetha ea file konopo eo u lakatsang ho boloka ho eona. Haeba u khetha konopo
4. bakeng sa mohlalaample, le file e tla bolokoa thupeng ea USB e le "CONFIG04".Hlokomela: Haeba u na le konopo ea FUNCTION e tala e benyang, sena se bolela hore u se u ntse u e-na le data e bolokiloeng sebakeng seo. Kahoo haeba u sa batle ho e ngola, u se ke ua khetha konopo e tala e benyang.

Laola data ho tsoa ho USB

1. Hlokomela: Khetho ena e ka sebelisoa feela haeba u se u ntse u e-na le data ho tsoa ho selaoli sa Battery sa WiFly NE1 se bolokiloeng thupeng ea hau ea USB. Lintlha files e tla hlaha komporong ea hau joalo ka CONFIG01 - CONFIG12. Tsena files e ke ke ea bitsoa bocha. Ho seng joalo, molaoli a ke ke a li tseba.
2. Tobetsa 'me u tšoare konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
3. Fetolela ho daela / ENTER ho khetha khetho ea 9 (Laola data ho tsoa ho USB). Tobetsa konopo ea DIAL/ENTER ho kenya.
4. U sebelisa likonopo tsa FUNCTION 1-12, khetha file konopo eo u lakatsang ho e kenya khomphuteng ea hau.Hlokomela: Likonopo tse tala tse benyang FUNCTION li bonts'a hore ho na le data e bolokiloeng moo 'me e teng eo u ka e khethang. Haeba u khetha konopo e sa khanyeng, u tla fumana "Ho hloleha ha Ts'ebetso!" phoso.

Etsa sebopeho sa USB
Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha data eohle e ho thupa ea USB e tla hlakoloa. Ho khothaletsoa haholo hore u boloke lithupa tsohle tsa USB files khomphuteng ea hau pele u tsoela pele.

1. Ha lilaoli li tima, kenya thupa ea USB ka har'a lilaoli boema-kepe ba USB 'me u sebelise matla ho molaoli.
2. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
3. Fetolela ho daela ho DIAL/ENTER ho khetho ea 10 ea menyu (Fometa disk ea USB). Tobetsa konopo ea DIAL/ENTER ho kenya.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "YES". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Litlhophiso tsa Strobe
Tlhophiso ena e u lumella ho khetha mokhoa oo konopo ea STROBE e sebetsang ka eona. E u lumella ho khetha pakeng tsa Latch le Flash. Ho khetha Latch ho tla etsa hore konopo ea STROBE e be ON/OFF 'me ho khetha Flash ho tla e etsa ea nakoana, e tšoarelle ha feela o tobetsa konopo.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 11 (Litlhophiso tsa Strobe). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Kenya mohala oa DIAL/ENTER ho khetha pakeng tsa "Latch" le "Flash". Tobetsa konopo ea DIAL/ENTER ho netefatsa khetho ea hau

Mokhoa oa ho Boloka Matla

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 12 (Mokhoa oa ho Boloka Matla). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Fetola mohala oa DIAL/ENTER ho totobatsa "E" kapa "Che". Tobetsa konopo ea DIAL/ENTER ho kenya tšebetsong.

Boemo ba Battery

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 13 (Boemo ba Betri). Tobetsa konopo ea DIAL/ENTER ho kenya. Boemo ba betri joale bo tla bontšoa.

Hlakola Memori
Hlokomela: Mosebetsi ona o lokela ho sebelisoa ka hloko kaha o tla hlakola mehopolo eohle e bolokiloeng ho likonopo tsa MEMORY 1-12. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela/ENTER ho khetha khetho ea 14 (Phumula Memori). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. Kenya mohala oa DIAL/ENTER ho khetha memori eo u lakatsang ho e hlakola. Tobetsa konopo ea DIAL/ENTER ho kenya tšebetsong.
4. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
5. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Hlakola data kaofela
Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha e tla hlakola lintlha tsohle tse bolokiloeng ho molaoli oa hau. Lintlha tse hlakotsoeng li tla kenyelletsa litsebi tsohlefiles le konopo ea MEMORY files. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 15 (Hlakola Lintlha Tsohle). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong

Tlhophiso ea Feme
Hlokomela: Ts'ebetso ena e lokela ho sebelisoa ka hloko kaha e tla hlakola lintlha tsohle, mehopolo, 'me e khutlisetse litlhophiso tsohle, ho kenyeletsoa paskhoutu, ho khutlela fekthering ea kamehla. Paskhoutu ea kamehla ea ho etsa tšebetso ena ke 1668. Haeba paskhoutu ea hau e fetohile, u tla hloka ho e kenya ho etsa tšebetso ena.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 16 (Litlhophiso tsa Fektheri). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu.
4. Tobetsa konopo ea DIAL/ENTER ho khetha "Ee". Tobetsa daela DIAL/ ENTER ho kenya tshebetsong.

Fetola Passcode

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 17 (Fetola Password). Tobetsa konopo ea DIAL/ENTER ho kenya.
3. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu ea hajoale.
4. U sebelisa likonopo tsa FUNCTION 1-12, kenya paskhoutu ea hau e ncha ea linomoro tse 'ne, ebe u kenya paskhoutu ea hau e ncha lekhetlo la bobeli ho netefatsa.

Mofuta oa Firmware
Tlhokomeliso: Sena ke khetho ea ho bala feela e tla bonts'a balaoli mofuta oa hajoale oa software.

1. Tobetsa konopo ea SET-UP metsotsoana e 'meli ho kenya menu e kholo.
2. Fetolela ho daela / ENTER ho khetha khetho ea 18 (Firmware Version). Tobetsa konopo ea DIAL/ENTER ho kenya. Tobetsa konopo ea ESC/PAGE ho tsoa.

Taolo ea Fixture, Saving, & Playing Memories
Hlokomela: Ho phaella ho generic profiles, mosebelisi a ka khetha ho kenya le ho sebelisa pro ea tloaelofiletse fanoeng ho USB sitck kenyelelitsoe le molaoli. Pro e tloaelehilengfiles e ka fana ka taolo e eketsehileng le likarolo tseo generic profiles se kenyeletse. Haeba u lakatsa ho sebelisa pro customfiles, ka kopo sheba ho Loading Fixture Profiles ea bukana ena ea mosebelisi 'me u li laele pele u tsoela pele. Ka mor'a hore u lokise lisebelisoa tsa hau, u ka laola le ho boloka mehopolo u sebelisa mehato e latelang.

1. Tobetsa konopo ea FIXTURE ebe u khetha li-fixtures, u sebelisa likonopo tsa FUNCTION 1-12, tseo u batlang ho li laola. Haeba u sebelisa li-fixtures tse ngata tsa mofuta o le mong 'me u batla ho li laola ka nako e le' ngoe, u ka tobetsa likonopo tsa pele le tsa ho qetela e le hore lisebelisoa tsohle tse lipakeng li khethoe ka nako e le 'ngoe. Bakeng sa mohlalaample, haeba u kentse li-fixtures tse 6 ho li-buttons tsa 1-6, ho li khetha kaofela kapele, u ka tobetsa ka nako e le 'ngoe likonopo 1 & 6 hore ho khethoe lisebelisoa tsohle tse 6.
2. Tobetsa konopo ea COLOR ebe u eketsa mmala ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ ENTER ho chencha lipakeng tsa maqephe a mabeli a mebala e seng e setiloe (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse). 3. Tobetsa konopo ea GOBO ebe u eketsa gobo ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ ENTER ho chencha lipakeng tsa maqephe a mabeli a li-gobos tse seng li setiloe (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
3. Tobetsa konopo ea EFFECT 'me u kenye sephetho ka ho sebelisa likonopo tsa FUNCTION 1-12. Fetola mohala oa DIAL/ ENTER ho chencha lipakeng tsa maqephe a mararo a litlamorao. Pontšong, u tla bona ML EFFECT (bakeng sa mabone a tsamaeang) le RGB EFFECT 1 le RGB EFFECT 2 (bakeng sa RGBWA+UV LED's) hammoho le lebelo, mohato, boholo, le litlhophiso tsa tataiso, tse ka laoloang ho tloha ho tse 'nè tsa EFFECT rotary. dial. O ka emisa sephetho ka nako efe kapa efe ka ho tobetsa konopo ea PAUSE. (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
4. Tobetsa konopo ea SHOW 'me u lumelle pontšo ka ho sebelisa likonopo tsa FUNCTION 1-12. (Hlokomela: sebopeho sa hau se tlameha ho ts'ehetsa karolo ena hore e sebetse).
5. Hape o ka seta boleng bohle ba kanale ka bowena. Haeba u se u ntse u seta ketsahalo ea hau 'me u batla ho e boloka, tlolela mohatong oa 7. Ho etsa litokiso tsa kanale ka letsoho, tobetsa konopo ea FIXTURE, ebe u tobetsa DIAL/ENTER daela metsotsoana e 'meli. Pontšo e tla thathamisa liteishene 1-4 hammoho le boleng ba tsona ba hajoale. Sebelisa li-dial tse 'ne tsa EFFECT ho lokisa kanale e' ngoe le e 'ngoe e thathamisitsoeng skrineng. Likanale li hlahisoa hane ka nako. Ho fihlella likanale tse ling, penya DIAL/ENTER daela.
6. Ho boloka tlhahiso ea hau ea hajoale, tobetsa 'me u hatelle likonopo life kapa life ho tse tšeletseng tsa MEMORY ho fihlela ponts'o e baleha "Operation Complete!". Tobetsa eona konopo ea MEMORY lekhetlo la bobeli ho bapala ho tsoa sebakeng seo sa memori, se tla khantša botala bo tiileng. Pheta mehato ea 1-6 ho boloka mehopolo e meng. Ho na le libanka tse peli tsa memori. Ho fihlella banka ea memori ea bobeli tobetsa konopo ea ESC/PAGE. Haeba ho na le memori e sebetsang, konopo eo ea MEMORY e tla khanya ho u tsebisa hore e sebetsa ka mafolofolo bankeng e 'ngoe. Haeba mohopolo oa hau o kenyelletsa "EFFECT", o ka emisa phello ka ho tobetsa konopo ea PAUSE.
7. O ka kenya konopo ea STROBE ka nako efe kapa efe nakong ea ho bapala. Konopo ea STROBE e tla sebetsa ho latela maemo a fader a STROBE RATE. Ho fetola fader ea hau ea STROBE RATE ho tla u fa taolo ea DMX holim'a shutter ea hau kapa liteishene tsa RGBWA+UV. Ts'ebetso ena e ke ke ea bolokoa mohopolong.
8. U ka khona ho fetola sefahla sa MASTER DIMMER ka nako efe kapa efe nakong ea ho bapala ho theha matla a akaretsang bakeng sa lisebelisoa tse sebetsang. Ts'ebetso ena e ke ke ea bolokoa mohopolong

KAKARETSO LITS'OANELO

Profile	Litsela tsa DMX	Litaba tsa Channel
RGB	3	CH1=RED, CH2=TALA, CH3=BUPUTSO
RGBW	4	CH1=RED, CH2=TALA, CH3=BUPUTSO, CH4=TSHEPE
RGBA	4	CH1=RED, CH2=TALA, CH3=BUPUTSO, CH4=AMBER
RGBWA	5	CH1=RED, CH2=TALA, CH3=BUPUTSO, CH4=TSHEPE, CH5=AMBER
RGBWAU	6	CH1=RED, CH2=TALA, CH3=BUPUTSO, CH4=TSHEPE, CH5=AMBER, CH6=UV
TŠOEU TŠOEU	3	CH1=BOSOOA BA MOFUDU, CH2=BOTSHEPE BA HAPE, CH3=AMBER
36CH ML 8-BIT	36	CH1=PAN, CH2=TILT, CH3=CH3, CH4=CH4,… CH35=CH35, CH36=CH36
36CH ML 16-BIT	36	CH1=PAN, CH2=PAN FINE, CH3=KGOMO, CH4=TEKA HAHOLO, CH5=CH5, CH6=CH6,… CH35=CH35, CH36=CH37

MOEKETSI PROFILE LITŠOANTŠISO

NO.	Ntho Lebitso	File Mabitso (Linomoro qetellong ea le leng le le leng file lebitso bontša mokhoa oa mocha)
1	Ka kakaretso 36ch ML 8-bit	36CH-M1
2	Ka kakaretso 36ch ML 16-bit	36CH-M2
3	Mofuta oa RGB oa LED	RGB
4	Generic RGBA LED	RGBA
5	Leseli la RGBW le tloaelehileng	RGBW
6	Generic RGBWA LED	RGBWA
7	Generic RGBWAU LED	RGBWAU
8	Generic Tri White LED	WWCWA
9	COB Cannon Hlatsoa	COBCWS-1, COBCWS-2, COBCWS-3, COBCWS-4, COBCWS-5, COBCWS-6, COBCWS-7
10	Bohlanya 8	CRAZ8-1, CRAZ8-9, CRAZ8-12, CRAZ8-15
11	Moroallo oa Dotz	DFLD-3, DFLD-4, DFLD-6, DFLD-9A, DFLD-9B
12	Dotz Par-100	DP100-3, DP100-4, DP100-5, DP100-9
13	Ketsahalo ea Bar Q4	EBQ4-2, EBQ4-12, EBQ4-14, EBQ4-32, EBQ4-34
14	Sebaka sa Ketsahalo	EVBAR-12, EVBAR-14, EVBAR-25
15	Flat Par QA12XS	FPQA12-1, FPQA12-2, FPQA12-3, FPQA12-4, FPQA12-5, FPQA12-6, FPQA12-7, FPQA12-8
16	Freq Matrix Quad	FMAQD-2, FMAQD-5, FMAQD-18
17	Illusion Dotz 3.3	ID33-12, ID33-13
18	Illusion Dotz 4.4	ID44-12, ID44-14
19	Inno Beam LED	IBLED-12, IBLED-14
20	Inno Color Beam 12	ICB12-9, ICB12-16
21	Inno Color Beam LED	ICBL-1, ICBL-13
22	Inno Color Beam Quad 7	ICBQ7-1, ICBQ7-13
23	Inno Color Beam Z7	ICBZ7-14
24	Inno Color Beam Z19	ICB19-14
25	Inno Pocket Scan	INPSCN-6
26	Inno Roll HP	IRHP-9
27	Inno Pocket Beam	IPB-10, IPB-11, IPB13
28	Inno Pocket Roll	IPROLL-6
29	Inno Pocket Spot	IPS-9, IPS-11
30	Inno Pocket Spot Pearl	IPSP-9, IPSP-11
31	Mafahla a Inno Pocket Spot	IPST19, IPST23
32	Inno Pocket Hlatsoa	IPW-9, IPW-11, IPW-19, IPW-21
33	Inno Pocket Fusion	IPF-2, IPF-6, IPF-8, IPF-9, IPF-11
34	Inno Scan HP	ISHP-9, ISHP-12
35	Inno Spot LED Wifly	ISLEDW10
36	Inno Spot Elite	ISPEL-15
37	Inno Spot LED	ISLED-10
38	Inno Spot Pro Pearl	ISPPRL14
39	Inno Spot PRO	ISPRO-14
40	Kaos	KAOS-2, KAOS-6, KAOS-15, KAOS-23
41	Mega Par Profile Hape	MPPP-4, MPPP-5, MPPP-6, MPPP-9, MPPP-10
42	Mega Tri Par Profile Hape	MTPPP-4, MTPPP-5, MTPPP-6, MTPPP-9, MTPPP-10
43	Nucleus LED	NUCLS-4
44	Pixel Pulse Bar	PPBAR-1, PPBAR-4
45	Karolo ea Quad HP	QPHP-4
46	Quad Scan Pro	QSPRO-32
47	Sniper 2R	SN2R-14, SN2R-16, SN2R-18
48	Sweeper Beam Quad LED	SBQLED-6
49	Starburst	SBST-13
50	Stinger	STNGR-10
51	Vizi Beam 5R	VB5R-10, VB5R-12
52	Vizi Beam 5RX	VB5RX-16, VB5RX-19
53	Vizi Beam Hybrid 2R	VBH2R-10, VBH2R-12
54	Vizi Spot 5R	VS5R-11, VS5R-13
55	Phetolelo ea 1200	VTEX-14, VTEX-15, VTEX-17
56	Ntoa ea ntoa	MOTSAMAI8
57	WiFly Bar QA5	WBQA5-4, WBQA5-5, WBQA5-6, WBQA5-7, WBQA5-8
58	WiFly EXR HEX5IP	WEH5IP6, WEH5IP7, WEH5IP8, WEH5IP11, WEH5IP12
59	WiFly Par QA5	WPQA5-1, WPQA5-2, WPQA5-3, WPQA5-4, WPQA5-5, WPQA5-6, WPQA5-7, WPQA5-8
60	X-Move LED 25R	XML25R-9
61	Zipper	ZIPPR-1, ZIPPR-3, ZIPPR-11

LIEKETSENG SOFETA

Ho etsa ntlafatso ea software, latela litaelo tse ka tlase:

1. Kenya software e ntlafalitsoeng ho drive ea USB. Ho lokela ho ba le foldara e nang le lebitso "ADJ-NE1" e nang le software file e nang le sehlooho se reng "ADJ-NE1.SUP". Ho khothalletsoa ho ba le drive ea USB e se nang letho files ntle le software file.
2. Tima matla a mantlha a yuniti, 'me u hokele USB ka software e ntlafalitsoeng boema-kepeng ba USB ba yuniti.
3. Tobetsa o hatelle likonopo tsa Memory 3, Memory 4, le Seta ha o ntse o bulela yuniti matla hape. Lentsoe "LOAD" le tla hlahisoa skrineng, 'me yuniti e tla qala ho khoasolla software e ntlafalitsoeng.
4. Skrine e tla u khothalletsa hore u qale yuniti ha download e felile. Matlafatsa yuniti, ebe o e bula hape 'me u ee karolong ea tlhaiso-leseling ea software ho menu ea sistimi ho netefatsa hore nomoro ea mofuta oa software e ntlafalitsoe.

Hlokomela: Linomoro tsa mofuta oa software 1.0 ho isa ho 1.2 li khona ho bala li-drive tsa USB tse fihlang ho 1GB ka boholo. Software version 1.4 e khona ho bala USB flash drives ho fihlela ho 8GB, le software version 2.0 e khona ho bala USB flash drive ho fihlela ho 16GB.

LIEKETSENG TS'OANELO

Likaroloana

• 432 channel DMX Controller e nang le ADJ's WiFLY Transceiver Wireless DMX ka botong. (E ka boela ea e-baB ka lithapo tse thata ka likhoele tsa 3-pin DMX)
• E etselitsoe Inno Series le RGB, RGBW, RGBA, RGBWA le RGBWA+UV LED's empa e ka laola boholo ba lihlahisoa tsa DMX tse nang le liteishene tse 36 kapa ka tlase ho moo.
• Jenereithara ea litlamorao e hahelletsoeng ka har'a mabone a tsamaeang le li-LED
• Laola ho fihla ho lipapali tse 12 tsa batho ka bomong
• 12 Mehopolo ka 2 Banks
• Li-Encoders tse 4 tsa Rotary bakeng sa Channel & Taolo ea Mosebetsi
• Taolo ea Master Dimmer Fader
• Strobe Rate Fader Control
• Likonopo tsa 6 Mode (Sebopeho, Mmala, Gobo, Effect, Show, & Emisa)
• 12 Likonopo tsa Multi-Function
• Konopo ea Blackout
• Boema-kepe ba USB Bokahohle (Sethupa sa USB se kenyelelitsoe)
• AC kapa DC e tsamaisoa
• Bophelo ba Battery: ho fihla ho lihora tse 10

Lintlha tsa Tech

• Sehokelo sa DMX: 3-phini XLR
• Motlakase oa Matla: 9-12V DC min 300mA UL Phepelo e amohelehang ea Matla (E kenyelelitsoe)
• Tšebeliso ea matla: Li-Watts tse 2.7
• Boholo: 12.8 "x 7.25" x 2.75 "(325 x 185 x 68.7mm)
• Boima ba 'mele: 4.4 lbs. (2 lik'hilograma)

Litlhaloso tsa Battery

• Bophelo ba Battery: Lihora tse 10
• Mofuta oa Leshala: Betri ea lithium e tsitsitseng
• Matla a Betri: 24.42WH (Lihora tsa Watt)
• Boima ba Betri: 141g
• Battery Voltage: 11.1v
• Bokhoni ba Battery: 2.2Ah
• Kakaretso ea Lithium Ion Lisele: 3pcs

Tšehetso ea Bareki
ADJ Products, LLC e fana ka mohala oa mahala oa tšehetso ea bareki ho fana ka thuso le
ho araba lipotso life kapa life tse ka hlahang nakong ea ho seta kapa ts'ebetso ea pele. U ka boela ua re etela ho
web ho www.adj.com bakeng sa maikutlo kapa litlhahiso. Lihora tsa Tšebeletso ke Mantaha ho fihlela Labohlano
8:00 am ho 4:30 pm Pacific Standard Time.
Lentsoe: 800-322-6337
Fax: (323)582-2941
E-mail: tšehetso@adj.com
Tlhokomeliso! Ho thibela kapa ho fokotsa kotsi ea ho tsosoa ke motlakase kapa mollo, u se ke ua pepesetsa yuniti ena pula kapa
mongobo.

Litokomane / Lisebelisoa

ADJ WiFly NE1 Battery DMX Controller [pdf] Bukana ea Mosebelisi WiFly NE1 Battery DMX Controller, NE1 Battery DMX Controller, Battery DMX Controller, DMX Controller, Controller

Litšupiso

• Bukana ea Mosebelisi