UM3099
Bukana ea mosebelisi
Mokhoa oa ho sebelisa StellarLINK
Selelekela
The StellarLINK ke mochine oa li-circuit debugger / programmer bakeng sa malapa a li-microcontrollers a Stellar le bakeng sa malapa a microcontroller a SPC5x.
Hlokomela: setšoantšo ha se sa konteraka.
Fetileview
Adapter ea StellarLINK ke USB/JTAG debugger dongle bakeng sa lisebelisoa tsa Stellar le lisebelisoa tsa SPC5x. E lumellana le IEEE 1149.1 JTAG protocol.
Adapter ea StellarLINK e thusa ho sebetsa le ho lokisa lits'ebetso ho liboto tsa Stellar le ho liboto tsa SPC5x mme e fana ka lenaneo la NVM (hlakola/lenaneo/netefatsa).
Tumellano ea laesense
Ho paka ha boto ena ea tlhahlobo ho ne ho tiisitsoe ka tiiso e bolelang, ka ho roba tiiso ena, u lumellana le lipehelo le lipehelo tsa tumellano ea laesense ea boto ea tlhahlobo, lipehelo le lipehelo tse fumanehang ho https://www.st.com/resource/en/evaluation_board_terms_of_use/evaluationproductlicenseagreement.pdf.
Kamora ho qhaqha tiiso, uena le STMicroelectronics le ile la kena tumellanong ea laesense ea boto ea tlhahlobo, eo kopi ea eona e kentsoeng le boto ea tlhahlobo bakeng sa boiketlo.
Tlhokomeliso: Boto ena ea tlhahlobo e fana ka likarolo tse fokolang feela tsa ho lekola lihlahisoa tsa ST. Ha e e-s'o hlahlojoe hore e sebelisoe le lihlahisoa tse ling 'me ha e loketse tšireletso leha e le efe kapa ts'ebeliso e' ngoe ea khoebo kapa ea bareki. Boto ena ea tlhahlobo e fanoe ka tsela e 'ngoe "AS IS" 'me STMicroelectronics ha e fane ka litiisetso tsohle, tse boletsoeng kapa tse ka hlalosoang, ho kenyeletsoa le litiisetso tse boletsoeng tsa thekiso le ho itekanela molemong o itseng.
Ho sebetsana le litemoso
Ka kopo hlokomela ho sebetsana le litaba tsa sephutheloana ho thibela ho tsoa ha electrostatic.
Pele EVB e sebelisoa kapa matla a sebelisoa, ka kopo bala ka botlalo likarolo tse latelang mabapi le mokhoa oa ho lokisa boto ka nepo. Ho hloleha ho hlophisa boto ka nepo ho ka baka karolo e ke keng ea lokisoa, tšenyo ea MCU kapa EVB.
Tlhaloso ea Hardware
4.1 Likarolo tsa Hardware
StellarLINK e na le lintlha tse latelang:
- USB/JTAG debugger dongle
- Matla a 5 V a fanoang ke sehokelo sa mini-USB
- E nolofalletsa ho sebetsa le ho lokisa lits'ebetso ho lisebelisoa tsa Stellar le lisebelisoa tsa SPC5x
- E lumellana le IEEE 1149.1 JTAG protocol
- E kopanya khokahano ea serial port ka USB interface (virtual COM)
- E fana ka mananeo a NVM (hlakola/program/netefatsa)
- Lihokelo:
- Sehokelo sa 20-pin Arm® sa JTAG/Sehokelo sa mantlha sa DAP
- Sehokelo sa lihlooho tse 10 bakeng sa JTAG/Sehokelo sa mantlha sa DAP
- Sehokelo sa lihlooho tse 14 bakeng sa JTAG segokahanyi
- Sehokelo sa lihlooho tse 3-pin bakeng sa interface ea UART - Maemo a LED a bonts'a palo ea target ea IOtage, boemo ba khokahano, le boemo ba ho sebetsa
- Boemo ba mocheso o sebetsang: ho tloha ho 0 ho isa ho 50 °C
LIEKETSENG TSE HLAHANG
5 Ho hlophisoa ha Hardware leqepheng la 7
4.2 Litekanyo tsa Hardware
The StellarLINK e na le litekanyo tse latelang:
- Boto ea boholo: 54 mm x 38 mm x 15 mm
Sebopeho sa Hardware
StellarLINK ke adaptara ea USB e thehiloeng ho FTDI FT2232HL interface chip.
EEPROM ea mosebelisi e entsoe ka nomoro ea serial e ikhethang.
5.1 Lihokelo
Tafole e latelang e hlalosa li-connectors tse teng ka boto ea StellarLINK.
Lethathamo la 1. Lihokelo
| Sehokedi | Tlhaloso | Boemo |
| P1 | Sehokelo sa basali sa Mini-USB | Lehlakore le ka holimo la A2 |
| SWJ1 | Sehokelo sa lihlooho tse 10-pin bakeng sa JTAG/Sehokelo sa mantlha sa DAP | Lehlakore le ka holimo la A3 |
| CN1 | Sehokelo sa lihlooho tse 14-pin bakeng sa JTAG segokahanyi | Lehlakore le ka holimo la D2-D3 |
| CN2 | Sehokelo sa lihlooho tse 3-pin bakeng sa segokanyimmediamentsi sa UART | Lehlakore le ka holimo la D1 |
| CN3 | 20-pin Sehokelo sa Arm bakeng sa JTAG/Sehokelo sa mantlha sa DAP | Lehlakore le ka holimo la B4-C4 |
Setšoantšo se latelang se bontša boemo ba lihokelo tse fumanehang ho adaptara ea StellarLINK.
LIEKETSENG TSE HLAHANG
6 Rala hapeview leqepheng la 11
7 BOM leqepheng la 13
5.1.1 SWJ1
Tafole e latelang e hlalosa SWJ1 pinout.
Letlapa la 2. SWJ1 pinout
| Pin | Tlhaloso |
| 1 | VIN |
| 2 | TMS |
| 3 | GND |
| 4 | TCK |
| 7 | GND |
| 5 | GND |
| 6 | TDO |
| 8 | TDI |
| 9 | GND |
| 10 | SRST |
LIEKETSENG TSE HLAHANG
7 BOM leqepheng la 13
5.1.2 CN1
Tafole e latelang e hlalosa pinout ea CN1.
| Pin | Tlhaloso |
| 1 | TDI |
| 2 | GND |
| 3 | TDO |
| 4 | GND |
| 7 | TCK |
| 5 | GND |
| 6 | USERID 0 |
| 8 | USERID 1 |
| 9 | SRST# |
| 10 | TMS |
| 11 | VIN |
| 12 | NC |
| 13 | NC |
| 14 | TRST# |
LIEKETSENG TSE HLAHANG
7 BOM leqepheng la 13
5.1.3 CN2
Tafole e latelang e hlalosa pinout ea CN2.
Lethathamo la 4. CN2 pinout
| Pin | Tlhaloso |
| 1 | UART_RX |
| 2 | UART_TX |
| 3 | GND |
LIEKETSENG TSE HLAHANG
7 BOM leqepheng la 13
5.1.4 CN3
Tafole e latelang e hlalosa pinout ea CN3.
Lethathamo la 5. CN3 pinout
| Pin | Tlhaloso |
| 1 | VIN |
| 2 | NC (e phahamisang R21 e hokahantsoeng le VIN) |
| 3 | TRSTN |
| 4 | GND |
| 5 | TDI |
| 6 | GND |
| 7 | TMS |
| 8 | GND |
| 9 | TCK |
| 10 | GND |
| 11 | NC |
| 12 | GND |
| 13 | TDO |
| 14 | GND# |
| 15 | SRST# |
| 16 | GND |
| 17 | NC |
| 18 | GND |
| 19 | NC |
| 20 | GND |
LIEKETSENG TSE HLAHANG
7 BOM leqepheng la 13
5.2 li-LED
Tafole e latelang e hlalosa li-connectors tse teng ka boto ea StellarLINK.
Lethathamo la 6. Li-LED
| Sehokedi | Tlhaloso | Boemo |
| D1 | Seteishene e reriloeng e seta bocha LED | Lehlakore le ka holimo la D4 |
| D2 | Mosebelisi oa LED | Lehlakore le ka holimo la D4 |
| D3 | Sepheo sa IO voltage LED | Lehlakore le ka holimo la D4 |
| D4 | UART Rx LED | Lehlakore le ka holimo la A1 |
| D5 | UART Tx LED | Lehlakore le ka holimo la A1 |
| D6 | Matla a LED | Lehlakore le ka holimo la A2 |
LIEKETSENG TSE HLAHANG
6 Rala hapeview leqepheng la 11
7 BOM leqepheng la 13
5.3 Li-Jumpers
Tafole e latelang e hlalosa li-jumpers tse teng ka har'a boto ea StellarLINK.
Letlapa la 7. Li-Jumpers
| Sehokedi | Tlhaloso | Boleng ba kamehla | Boemo |
| JP1 | Tlhophiso ea lets'oao la sepheo sa TRSTN • 1-2: E hokahane le 10K ohm pullup resistor • 1-3: E hoketsoe ho TRST ho tsoa FTDI • 2-3: E hokahane le GND |
1-3 | Lehlakore le ka holimo la A3 |
LIEKETSENG TSE HLAHANG
6 Rala hapeview leqepheng la 11
7 BOM leqepheng la 13
Moralo o fedileview
BOM
Tafole 8. BOM
| # | Ntho | Qty | Boleng | Khetho ea ho kenya | Tlhaloso | Leoto la maoto |
| 1 | C1, C3, C7, C8, C9, C10, C11, C12, C13, C14, C15, C17, C19, C21, C22, C23, C24, C25 | 18 | 100NF | Capacitor X7R - 0603 | 0603C | |
| 2 | C2, C4 | 2 | 10μF | Capacitor X7R - 0603 | 0603C | |
| 3 | C5, C6 | 2 | 12pF | C0G ceramic multilayer capacitor | 0603C | |
| 4 | C16, C18, C20 | 3 | 4μ7 | Capacitor X7R - 0603 | 0603C | |
| 5 | CN1 | 1 | Header 7X2 female | Hlooho, 7-Pin, mela e 'meli (6+2.5+10mm) | C_EDGE7X2_254 | |
| 6 | CN2 | 1 | Se ke oa tlala | Sehokelo sa hlooho, PCB Mount, haufinyane, mabitso a 3, pin, 0.1 pitch, terminal ea mohatla oa pc | STP3X1 | |
| 7 | CN3 | 1 | ARM20 | Conn Flat Male 20 Pins, straight low profile | C_EDGE10X2_254 | |
| 8 | D1, D2, D3, D6 | 4 | KP-1608SGC | Botala ba LED | LED_0603 | |
| 9 | D4 | 1 | KP-1608SGC | Botala ba LED | LED_0603 | |
| 10 | D5 | 1 | KP-1608SGC | Botala ba LED | LED_0603 | |
| 11 | JP1 | 1 | Hlooho ea 3 × 2 + jumper | Jumper 4×2.54_Closed_V | STP3X2_P50_JMP3W | |
| 12 | L1, L2, L3, L4 | 4 | 74279267 | Sefaha sa Ferrite 0603 60Ohm 500mA | 0603 | |
| 13 | P1 | 1 | Boema-kepe ba USB_B | USB-MINI_B | HRS_UX60SC-MB-5S8 | |
| 14 | R1, R11, R18, R21 | 4 | 0R | Se ke oa tlala | Mohanyetsi 0603 | 0603R |
| 15 | R2, R3 | 2 | 10R | Mohanyetsi 0603 | 0603R | |
| 16 | R4 | 1 | 1k | Mohanyetsi 0603 | 0603R | |
| 17 | R5 | 1 | 12k | Mohanyetsi 0603 | 0603R | |
| 18 | R6, R7 | 2 | Filimi e teteaneng ea Res 0603 470 ohm 1% 1/4W | 0603R | ||
| 19 | R8, R9, R14, R16, R17 | 5 | 4k7 | Mohanyetsi 0603 | 0603R | |
| 20 | R10 | 1 | 2k2 | Mohanyetsi 0603 | 0603R | |
| 21 | R12, R13, R15, R22 | 4 | 470 | Mohanyetsi 0603 | 0603R | |
| 22 | R19, R24 | 2 | 0R | Mohanyetsi 0603 | 0603R |
| # | Ntho | Qty | Boleng | Khetho ea ho kenya | Tlhaloso | Leoto la maoto |
| 23 | R20, R23 | 2 | 10k | Mohanyetsi 0603 | 0603R | |
| 24 | SWJ1 | 1 | SAM8798-ND | Sehokelo sa bothata 5×2 1.27mm | SAMTEC_FTSH-105-01-LD | |
| 25 | TP1 | 1 | 90120-0921 | Se ke oa tlala | Lihlooho | TP |
| 26 | TP2 | 1 | 90120-0921 | Se ke oa tlala | Lihlooho | TP |
| 27 | TVS1, TVS2, TVS3, TVS4, TVS5, TVS6, TVS7, TVS8, TVS9 | 9 | 5.0V | Mohatelli oa ESD WE- VE, Vdc=5.0V | SOD882T | |
| 28 | U1 | 1 | FT2232HL | FT2232HL | TQFP50P1000X1000X100-64N | |
| 29 | U2 | 1 | USBLC6-2P6 | Tšireletso ea ESD | SOT666 | |
| 30 | U3 | 1 | LD1117S33TR | Phaello e tlase e ntle ka matlatagmolaoli | SOT223 | |
| 31 | U4 | 1 | M93S46XS | 1K (x16) serial microwire bese EEPROM e nang le Block protection | SO-8 | |
| 32 | U5, U6, U7 | 3 | SN74LVC2T45DCTR | Transceiver ea libese tsa Dual-Bit tse peli | SM8 | |
| 33 | U8, U9 | 2 | SN74LVC1T45DCK | Transceiver ea libese tse nang le thepa e 'meli e le 'ngoe | SOT563 | |
| 34 | U8A, U9A | 2 | SC70-6 | |||
| 35 | X1 | 1 | 12 MHz | Likristale tsa ECS 12MHz, CL 12,TOL +/-25 ppm, STAB +/-30 ppm,-40 +85 C,ESR 150O |
ECS-120-12-36-AGN-TR3 |
Maqheka
Nalane ea ntlafatso
Lethathamo la 9. Histori ea ntlafatso ea litokomane
| Letsatsi | Khatiso | Liphetoho |
| 07-Nov-2022 | 1 | Tokollo ea pele. |
| 20-Feb-2023 | 2 | Boemo ba lekunutu bo fetohile ho tloha ho batho feela. |
TSEBISO EA BOHLOKOA – BALA KA HLOKO
STMicroelectronics NV le li-subsidiary tsa eona ("ST") li na le tokelo ea ho etsa liphetoho, litokiso, lintlafatso, lintlafatso, le lintlafatso ho lihlahisoa tsa ST le/kapa tokomaneng ena ka nako efe kapa efe ntle le tsebiso. Bareki ba lokela ho fumana lintlha tsa morao-rao tse amanang le lihlahisoa tsa ST pele ba fana ka litaelo. Lihlahisoa tsa ST li rekisoa ho latela lipehelo le maemo a thekiso ea ST ka nako ea tumello ea taelo.
Bareki ke bona feela ba ikarabellang bakeng sa khetho, khetho, le tšebeliso ea lihlahisoa tsa ST mme ST ha e nke e le molato bakeng sa thuso ea kopo kapa moralo oa lihlahisoa tsa bareki.
Ha ho laesense, e hlalositsoeng kapa e boletsoeng, ea tokelo efe kapa efe ea thepa ea mahlale e fanoeng ke ST mona.
Ho rekisoa ha lihlahisoa tsa ST ka litokisetso tse fapaneng le tlhahisoleseding e boletsoeng mona ho tla hlakola waranti leha e le efe e fanoeng ke ST bakeng sa sehlahisoa se joalo. ST le logo ea ST ke matšoao a khoebo a ST. Bakeng sa lintlha tse ling mabapi le matšoao a khoebo a ST, sheba ho www.st.com/trademarks. Mabitso a mang kaofela a lihlahisoa kapa litšebeletso ke thepa ea beng ba tsona.
Lintlha tse tokomaneng ena li nkela sebaka le ho nkela tlhahisoleseding e neng e fanoe pele liphetolelong tsa pele tsa tokomane ena.
© 2023 STMicroelectronics – Litokelo tsohle li sirelelitsoe
Litokomane / Lisebelisoa
 |
ST StellarLINK Circuit Debugger Programmer [pdf] Buka ea Mong'a StellarLINK Circuit Debugger Programmer, StellarLINK, Circuit Debugger Programmer, Debugger Programmer, Programmer |
