MW PW M -90 letoto la Constant Voltage PWM Output LED Driver Ow Manual

Letoto la PWM-90 ke mokhanni oa LED oa 90W LED AC/DC LED e nang le matla a sa feleng.tage nang le PWM style output, e khonang ho boloka homogeneity e khanyang ha e khanna mefuta eohle ea mefuta e mengata ea LED.tage pakeng tsa 12V le 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 90.5%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa linyeoe -40C + 85C tlas'a convection ea mahala ea moea. Letoto lohle le fuoe maemo a ts'ireletso ea IP67 'me le loketse ho sebetsa bakeng sa ho omella, damp kapa libaka tse metsi. PWM-90 e na le ts'ebetso ea dimming e fapaneng le potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lits'ebetso tsa marang-rang tsa LED.

Moetso oa khouto ea mohlala

TS'ELISO

MOHLALA		EA-90-PW	EA-90-PW	EA-90-PW	EA-90-PW
SEHLOOHO	DC VOLTAGE	12V	24V	36V	48V
	RETŠELISITSOE NKHOANE	7.5A	3.75A	2.5A	1.88A
	REKETSO MATLA	90W	90W	90W	90.24W
	HO FIHLELA RANGE	0 ~ 100%
	PWM KEKETSO (Mofuta.)	1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type
	SETUP, TSOSA NAKO Hlokomela. 2 Hlokomela. 9	500ms, 80ms/115VAC kapa 230VAC
	NAKO EA HO PHETHA (Mofuta.)	16ms / 115VAC kapa 230VAC
KEKETSO	TLHOKOMELOTAGE RETS'ELA Hlokomela.3	90 ~ 305VAC 127 ~ 431VDC (Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC")
	MOEKETSENG MAKOANE	47 ~ 63Hz
	SEBETSO SA MATLA (Typ.)	PF> 0.98 / 115VAC, PF> 0.96 / 230VAC, PF> 0.92 / 277VAC @ mojaro o felletseng (Ka kopo, sheba karolo ea "POWER FACTOR (PF) CHARACTERISTIC")
	KAOFELA HARMONIC PHETOLO	THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Ka kopo sheba karolong ea "TOTAL HARMONIC DISTORTION")
	KATLEHO (Mofuta.)	88%	90.5%	90.5%	90.5%
	AC CURRENT (Mofuta.)	0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC
	INRUSH CURRENT (Mofuta.)	COLD QALA 60A(twidth=550 μs e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410
	MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER	Li-unit tse 3 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 6 (sekheo sa potoloho sa mofuta oa C) ho 230VAC
	LEAKAGE NKHOANE	<0.25mA / 277VAC
	   	<0.5W
TS'IRELETSO	KHAHLISA	108 ~ 130% e lekantsoe matla a tlhahiso
		Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe
	POTOLOHO E KHUTSOANE	Koala o/p voltage, kenya matla hape ho hlaphoheloa (ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2)
	KHAHLISO SEFOLITAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Koala o/p voltage, matlafatsa hape ho fola
	PHEKO MOCHESO	Koala o/p voltage, matlafatsa hape ho fola
TIKOLOHO	MOSEBETSI TEMPELA.	Tcase=-40 ~ +85℃ (Ka kopo, sheba karolo ea “ OUTPUT LOAD vs TEMPERATURE”)
	MAX. TLHALOSO TEMPE.	Mokotlana = + 85 ℃
	MOSEBETSI MOKOBELO	20 ~ 95% RH e sa lumellaneng
	POLOKO TEMP., MONATE	-40 ~ + 80 ℃, 10 ~ 95% RH
	MOEKETSI. TIISETSO MOKHOA	± 0.03% / ℃ (0 ~ 50 ℃)
	TSIETSO	10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z
TŠIRELETSO & EMC	TS'IRELETSO MAEMO Hlokomela. 5	UL8750(ntle le DA-Type), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 e ikemetseng, BS EN/EN62384, IP67,BIS IS15885(bakeng sa 12,24,48 Mofuta o se nang letho feela), EAC TP TC 004,GB19510.1, GB19510.14. XNUMX e amohetsoe; Moralo o bua ka BS EN/EN60335-1; Ho ea ka BS EN/EN61347-2-13 sehlomathiso J se loketseng lits'ebetso tsa tšohanyetso.
	DALI LITEKELO	IEC62386-101, 102, 207,251 bakeng sa DA/DA2-Mofuta feela, Mofuta oa sesebelisoa 6(DT6)
	EMELANG KOLOKOTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	HO IKAOA KHANYETSO	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC TS'ISITSO Hlokomela. 6	Ho latela BS EN / EN55015, BS EN / EN61000-3-2 Sehlopha sa C (@ mojaro ≧ 60%); BS EN / EN61000-3-3, GB17743 le GB17625.1, EAC TP TC 020
	TSIETSI EMC	Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV), EAC TP TC 020
BA BANG	MTBF	2394.5K lihora tsa mets. Telcordia SR-332 (Bellcore); 224.2K lihora tsa mets. MIL-HDBK-217F (25℃)
	TŠEBELETSO	1716337.5mm (LWH)
	PAKA	0.77Kg; 18pcs / 14.9Kg / 0.97CUFT
HLOKOMELA	Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ho 230VAC, e lekantsoe hona joale le 25C ea mocheso o teng. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaasetages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka baka keketseho ea nako ea ho seta. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla ameha ka ho kenya ka ho feletseng, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho boela ba tšoaneleha EMC Directive mabapi le ho kenya ka ho feletseng hape. Letoto lena le kopana le tebello e tloaelehileng ea bophelo ea> lihora tse 50,000 tsa ts'ebetso ha Tcase, haholo-holo c) ntlha (kapa TMP, ka DLC), e ka bang 75C kapa ka tlase. Ka kopo sheba setatemente sa tiisetso ho MEAN WELLs website at http://www.meanwell.com Thempereichara ea tikoloho e fokotsehile ea 3.5 C/1000m ka mefuta e se nang moea le ea 5 CH000m e nang le mefuta ea fan bakeng sa bophahamo ba ts'ebetso bo fetang 2000m(65O0f). Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf E ipapisitse le matla a IEC 62386-101/102 DALI mabapi le melaoana ea nako le tšitiso, nako ea ho seta e hloka ho lekoa ka molaoli oa DALI eo e ka ts'ehetsa matla a DALI ts'ebetsong, ho seng joalo nako ea ho seta e tla ba holimo ho metsotsoana e 0.5 bakeng sa mofuta oa DA. Boitlhotlhollo ba Mokoloto oa Lihlahisoa: Bakeng sa lintlha tse qaqileng, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx

MOSEBETSI OA DIMMING

DIM+ bakeng sa Mofuta-Mofuta
- DA+ bakeng sa mofuta oa DA/DA2
DIM- bakeng sa mofuta o se nang letho
- DA- bakeng sa DA/DA2-mofuta

HLOKOMELA: DA / DA2-Mofuta ha o khetholle lipakeng tsa "+" le "-".

Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM

Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.

Output DC jwale

Nako ea mosebetsi(%) = TON/T×100%
Puisano ea PWM: 1.47kHz bakeng sa Blank/DA-Type 2.5kHz bakeng sa DA2-Type

3 ho 1 ts'ebetso ea dimming (bakeng sa Mofuta o se nang letho)

Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.
Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)

Ho sebelisa tlatsetso 0 ~ 10VDC

Ho kenya lets'oao la tlatsetso la 10V PWM (maqhubu a maqhubu a 100Hz ~ 3KHz)

Ho sebelisa khanyetso ea tlatsetso

Hlokomela

Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.

DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type)

Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso

OUTPUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC/ MATLA A MATLA (PF) MOTHO

Ho fokotseha hoa hlokahala tlas'a phallo e tlaase ea voltage.

PUSELETSO EA TSOHLE EA HARMONIC (THD)

Mohlala oa 48V, Tcase ho 75 ℃

KATLEHO vs MOJARO

Letoto la PWM-90 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong.

Mohlala oa 48V, Tcase ho 75 ℃

BOPHELONG

Setšoantšo se Thibeloang

Tlhaloso ea Mechini

Mofuta-Mofuta

Nomoro ea Nyeoe: PWM-90P
Yuniti: mm

DA/DA2-Mofuta

Khothaletsa Tataiso ea ho Nyoloha

Bukana ea ho kenya

Khokahano bakeng sa mofuta oa Blank

Litemoso

Pele o qala mosebetsi ofe kapa ofe oa ho instola kapa oa ho lokisa, ka kopo, hakolla phepelo ea motlakase f ‧ rom utility. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!

Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
Maemo a ho fanyeha ntle le a tloaelehileng kapa a sebetsa tlas'a mocheso o phahameng oa tikoloho a ka eketsa mocheso oa karolo ea ka hare 'me ho tla hloka hore ho fokotsoe tekanyo ea tlhahiso ea hona joale.

Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo sheba litlhaloso tsa eona.
Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile e le hore metsi a se ke a kenella tsamaisong.

Bakeng sa bakhanni ba LED ba timang, etsa bonnete ba hore selaoli sa hau sa dimming se khona ho khanna likarolo tsena.PWM series e hloka 0.15mA unit ka 'ngoe.
Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli.

U SE KE UA hokela "DIM- to Vo-".
E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e 30.
Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape.

Buka ea Mosebelisi

Litokomane / Lisebelisoa

MW PW M -90 letoto la Constant Voltage PWM Output LED Driver [pdf] Buka ea Mong'a
PW M -90 letoto la Constant Voltage PWM Output LED Driver, PW M -90 series, Constant Voltage PWM Output LED Driver, Output LED Driver

Litšupiso

Bukana ea Mosebelisi

MW PW M -90 letoto la Constant Voltage PWM Output LED Driver

Likaroloana

Lisebelisoa

Tlhaloso