SMARTEH LPC-3.GOT.112 Longo Programmable Controller

Litlhaloso

• Sehlahisoa Lebitso: Longo programmable controller LPC-3.GOT.112 Graphical Operation Terminal
• Mofuta: 2
• Moetsi: SMARTEH doo
• Keletso Voltage: 100-230 V lenaihana
• Naha ea tlhaho: Slovenia
• Websebaka: www.smarteh.si

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

• Pele o qala ts'ebetso ea ho kenya, etsa bonnete ba hore litekanyetso tsohle tsa polokeho le melaoana ea naha ea heno lia lateloa. Ke basebetsi ba lumelletsoeng feela ba lokelang ho sebetsa marang-rang a 100-230 V AC.

Setšoantšo se Thibeloang

• Setšoantšo sa block se fana ka overview ya dikarolo tsa ka hare le dikgokelo tsa molaodi. Sheba buka ea mosebelisi bakeng sa lintlha tse felletseng.

Li-interface tsa Khokahano ea Kenyelletso le Liphetho

• Hokela lisebelisoa tsa hau tsa ho kenya le tse tsoang ho li-interfaces tse khethiloeng ho latela litaelo tse fanoeng. Netefatsa likhokahano tse nepahetseng ho qoba ho se sebetse hantle.

Mounting Litaelo

• Latela litaelo tsa ho kenya ka hloko ho kenya molaoli ka mokhoa o sireletsehileng sebakeng se lakatsehang. Etsa bonnete ba hore e sirelelitsoe mongobo, litšila le tšenyo.

Menyetla ea ho Theha

• Ho theha motheo o nepahetseng ke oa bohlokoa bakeng sa ts'ebetso e sireletsehileng. Lekola menyetla ea motheo e boletsoeng bukeng ea tataiso 'me u e sebelise ka nepo.

Lenaneo la Tataiso

• Tataiso ea lenaneo e fana ka lintlha tsa ts'ebetso ea mantlha, tlhophiso ea WiFi, moralo oa GUI, le mekhoa ea mananeo. Itloaetse lintlha tsena ho sebelisa bokhoni ba molaoli ka nepo.

Module Labeling

• Utloisisa mokhoa oa ho ngola li-module ho tseba le ho laola likarolo tse fapaneng tsa molaoli hantle.

Likarolo tsa tlatsetso

• Sheba karolo ea li-spare parts bakeng sa tlhahisoleseding mabapi le likarolo tse ncha le litlhoko tsa tlhokomelo.

Lintlha

• Ela hloko tlhahisoleseding efe kapa efe ea bohlokoa kapa malebela a fanoeng karolong ea lintlha bakeng sa ts'ebetso e nepahetseng ea molaoli.

LBH

P: Na nka sebelisa molaoli ntle le ho latela litataiso tse boletsoeng tsa ho kenya?

A: Ho khothaletsoa haholo ho latela melaoana ea ho kenya ho netefatsa ts'ebetso e bolokehileng le e nepahetseng ea molaoli.
Ho hloleha ho etsa joalo ho ka baka tšenyo kapa ho se sebetse hantle.

TS'ELISO TS'OANELO

• SOM Sisteme ho module
• ARM Mechini e tsoetseng pele ea RISC
• OS Mokhoa oa tšebetso
• TCP Protocol ea taolo ea phetiso
• SSL Sireletsa li-sockets layer
• IBEC International Electrotechnical Commission
• KA Sebaka sa marang-rang sa taolo
• COM Puisano
• USB Universal serial bese
• USB OTG Universal serial bese Ha u ntse u tsamaea
• PLC Selaoli sa logic se hlophisitsoeng
• LED Diode e ntšang khanya
• RAM Memori ea phihlello e sa reroang
• NV E sa fetoheng
• PS Phepelo ea motlakase
• GUI Sehokelo sa mosebelisi se hlakileng
• RTU Setsi sa terminal se hole
• RTC Oache ea nako ea sebele
• IDE Tikoloho ea ntlafatso e kopaneng
• PBF Setšoantšo sa block block
• LD Setšoantšo sa lere
• SFC Chate ea tšebetso e latellanang
• SBBT Mongolo o hlophisitsoeng
• IL Lethathamo la litaelo

TLHALOSO

• Smarteh LPC-3.GOT.112 PLC-based graphical operation terminal e fana ka ts'ebetso e ntlafetseng le mefuta e mengata e fapaneng ea likarolo tse ncha ka har'a sephutheloana se le seng sa compact SOM-based.
• Seteishene sa ts'ebetso ea graphical se ipapisitseng le processor ea meralo ea ARM e tsamaisang Linux-based OS e eketsa matla a khomphutha, taolo e eketsehileng, le khokahano e eketsehileng ea sehokelo e fanang ka bokhoni bakeng sa lintlafatso tsa mojule oa SOM oa nakong e tlang ntle le liphetoho tsa Hardware.
• LPC-3.GOT.112 e na le boema-kepe bo kopantseng ba lenaneo la USB le ho lokisa liphoso, khokahano bakeng sa li-module tsa Smarteh tse bohlale tsa peripheral, likou tse peli tsa Ethernet, le khokahanyo ea WiFi e ka sebelisoang e le boema-kepe ba ho hlophisa le ho lokisa liphoso, joalo ka Modbus TCP/IP Master le/ kapa sesebelisoa sa Makhoba, le joalo ka BACnet IP (B-ASC). LPC-3.GOT.112 e boetse e na le kou ea RS-485 bakeng sa puisano ea Modbus RTU Master kapa Slave le lisebelisoa tse ling tsa Modbus RTU.
• Phetoho ea Hardware e etsoa ho sebelisoa software ea Smarteh IDE, e sebelisetsoang ho khetha terminal e hlokahalang ea ts'ebetso ea graphical.

Software ena e u fa mokhoa o bonolo oa ho kena lipuong tsa lenaneo la IEC tse kang:

• Lethathamo la Litaelo (IL)
• Block mosebetsi Setšoantšo (FBD)
• Setšoantšo sa Lere (LD)
• Sengoloa se Hlophisitsoeng (ST)
• Chate ea Mosebetsi oa Sequential (SFC).

Sena se fana ka palo e kholo ea basebetsi ba kang:

• Basebelisi ba kelello joalo ka AND, OR,…
• Basebelisi ba Arithmetic joalo ka ADD, MUL, ...
• Basebelisi ba papiso joalo ka <, =, >
• Tse ling…
• Lenaneo la software le sebelisetsoa ho theha, ho lokisa liphoso, ho lekola le ho ngola morero. Mesebetsi ea ts'ebetso ea analog, taolo e koetsoeng, le li-block tsa ts'ebetso joalo ka li-timers le li-counters li nolofatsa mananeo.
• Smarteh IDE software programming e boetse e u fa monyetla oa ho kena habonolo ho sesebelisoa sa moralo sa GUI se ts'ehetsa sete e kholo ea taolo e matla ho tloha ho likonopo ho ea ho matšoao mme e nolofalletsa khokahano lipakeng tsa lenaneo la PLC le sebopeho sa mosebelisi sa graphical.

LIKAROLOANA

Lethathamo la 1: Likarolo

• Sesepa sa khalase se se nang foreimi se nang le 4.3 ″ LCD le capacitive touch screen, sebopeho sa naha kapa sebopeho sa setšoantšo.
• Mojule oa mantlha oa nako ea 'nete oa Linux OS oa ARM
• Sebopeho sa graphical se entsoe ka bolokolohi ke mosebelisi ea nang le mohlophisi oa GUI ho software ea Smarteh IDE
• Khokahano ea Ethernet le WiFi bakeng sa ho lokisa liphoso le phetisetso ea ts'ebeliso, Modbus TCP/IP Slave (server) le/kapa Master (client) tshebetso, BACnet IP (B-ASC), web seva le setifikeiti sa SSL
• Sehokelo sa Wi-Fi bakeng sa lenakana la kantle
• Boema-kepe ba USB bakeng sa debugging le phetisetso ea ts'ebeliso, USB OTG
• Modbus RTU Master kapa Lekhoba
• Bese ea Smarteh bakeng sa ho hokahana le LPC-2 Smarteh e bohlale peripheral modules
• Phihlello ea remoutu le phetisetso ea ts'ebeliso
• RTC le 512 kB NV RAM e nang le supercapacitor bakeng sa polokelo ea matla e hlokahalang
• Buzzer e hahiloeng kahare e laoloang ke lenaneo la PLC
• Bontša boemo ba khanya bo laoloang ke lenaneo la PLC
• Skrine ea khalase e tšoeu kapa e ntšo
• Metal back housing
• Maemo a li-LED
• Moralo oa boleng

KEKETSO

Setšoantšo sa thibela

Khokahano ea ho kenya le ho tsoa

Lethathamo la 2: PS1 Phepelo ea motlakase1

• PS1.1 (+) + Phepelo ea motlakase, 8 .. 30 V DC, 2 A
• PS1.2 (-) - GND

Lethathamo la 3: COM1 RS-4852

1. Lithapo tse hokahaneng le mojule li tlameha ho ba le sebaka sa sefapano sa bonyane 0.75 mm2. Tekanyo e fokolang ea mocheso oa ho koala mohala e tlameha ho ba 85 °C.
2. Liprothokholo tse fapaneng tse kang Modbus RTU Master li ka khethoa kahare ho Smarteh IDE. Lithapo tse hokahaneng le mojule li tlameha ho ba le sebaka sa sefapano sa bonyane 0.14 mm2. Sebelisa likhoele tse sothehileng tsa mofuta oa CAT5+ kapa ho feta, ho buelloa ho sireletsa.

Litaelo tsa ho kenya

Litekanyo ka limilimithara

SWITCH EA KA NTLE KAPA SIRCUIT E TŠIRELETSO EA KA NTLE:

• Yuniti e lumelletsoe ho hokahana le ts'ireletso ka ts'ireletso ea morao-rao e nang le boleng ba lebitso la 6 A kapa ka tlase.
• Lihokelo tsohle, lihokelo tsa PLC, le ho kopanngoa li tlameha ho etsoa ha LPC-3.GOT.112 e sa hokeloa phepelong e kholo ea motlakase. Module e lokela ho behoa leboteng ka hare ho kamore.
• Qoba khanya ea letsatsi, ho ema haufi le lintho tse futhumatsang kapa tse batang, kapa ka tlas'a mabone a khanyang haholo bakeng sa lisebelisoa tse ntle ka ho fetisisa. Lebokose la mateano le liphaephe tse leboteng li tlameha ho koaloa ho thibela moea.
• Thempereichara e bonts'itsoeng e lekane mocheso oa hoo e ka bang. 10 cm ka tlase ho module le 1 cm ho tloha leboteng.
• Bophahamo bo khothaletsoang ba ho kenya ke 1.5 m ka holim'a boemo ba mokato. Sebopeho sa setšoantšo sa module se ka hlahisa liphoso tse fokolang litekanyong tsa mocheso.
• Lithapo tse hoketsoeng ho PLC li tlameha ho ba le sebaka se tšekaletseng bonyane 0.75 mm2.
• Tekanyo e fokolang ea mocheso oa ho koala mohala e tlameha ho ba 85 °C.

Ho beha litaelo lemating le kampetsoeng

1. Tlosa phepelo ea motlakase.
2. Etsa likoti tse khaotsoeng le ho li kenya - sheba setšoantšo sa 4.
3. Mount LPC-3.GOT.112 ho seha 'me u e fase ka likurufu.
4. Hokela phepelo ea motlakase le lithapo tsa puisano.
5. Tlosa phepelo ea motlakase.

Menyetla ea ho theha

• LPC-3.GOT.xxx palo ea phepelo ea motlakase e nyahamisang e hoketsoeng ho Protective Earth (PE) mosebetsi oa lefatše.
• LPC-3.GOT.xxx lipalo tsa phepelo ea motlakase tse nyahamisang tse sa hokahaneng le Lefatše le Sireletsang (PE) mosebetsi oa lefatše.

LIEKETSENG MOKHOPO

Lethathamo la 9: Litlhaloso tsa tekheniki

LITLHAKISO MOLAETSA

• Khaolo ena e reretsoe ho fana ka tlhahisoleseling e eketsehileng mabapi le tse ling tsa mesebetsi le likarolo tse kenyellelitsoeng ho terminal ena ea ts'ebetso ea graphical.

Mesebetsi ea motheo

Sehlopha sa RTC

• Bakeng sa li-backups tsa RTC le bakeng sa Boloka mefuta-futa ho na le Super Capacitor sebakeng sa ba attery e kopantsoeng ka hare ho PLC. Ka tsela ena, ho qojoa betri e lahliloeng.
• Nako ea ho boloka ke bonyane matsatsi a 14 ho tloha ha motlakase o theoha. Nako ea RTC e fana ka lintlha tsa letsatsi le nako.

Ethernet

• Boema-kepe ba Ethernet bo ka sebelisoa e le boema-kepe ba ho hlophisa le ho lokisa liphoso, joalo ka Modbus TCP / IP Master le / kapa sesebelisoa sa Makhoba, hape joalo ka BACnet IP (B-ASC).

WiFi

• Boema-kepe ba WiFi bo ka sebelisoa e le boema-kepe ba ho hlophisa le ho lokisa liphoso, joalo ka Modbus TCP / IP Master le / kapa sesebelisoa sa Makhoba, hape joalo ka BACnet IP (B-ASC).

Modbus TCP/IP master unit

Ha e hlophisitsoe bakeng sa mokhoa oa Modbus TCP / IP Master / Client, LPC-3.GOT.112 e sebetsa e le sesebelisoa se seholo, se laolang lipuisano le lisebelisoa tse ling tsa makhoba tse kang li-sensor, inverters, PLC tse ling, joalo-joalo LPC-3.GOT. 112 e romela litaelo tsa Modbus TCP/IP ho le ho amohela likarabo tsa Modbus TCP/IP ho tsoa ho lihlopha tsa makhoba.

Litaelo tse latelang lia tšehetsoa:

• 01 - Bala Boemo ba Coil
• 02 - Bala Boemo ba ho Kena
• 03 - Bala Ho Tšoara Rejistara
• 04 - Bala Lirekoto tsa Lintho
• 05 - Ngola Coil e le 'Ngoe
• 06 - Ngola Ngoliso e le 'Ngoe
• 15 - Ngola Likhoeli tse ngata
• 16 - Ngola Lingoliloeng tse ngata
• Hlokomela: E 'ngoe le e 'ngoe ea litaelo tsena e ka bala/ngola liaterese tse fihlang ho 10000.

Sehlopha sa makhoba sa Modbus TCP / IP

• Modbus TCP lekhoba le na le liaterese tsa 10000 karolong e 'ngoe le e' ngoe ea memori.
• Likhoele: 00000 ho ea ho 09999
• Litlhahiso tse ikhethang: 10000 ho ea ho 19999
• Ngoliso ea lintho tse kenang: 30000 ho ea ho 39999
• Ho tšoara rejisetara: 40000 ho ea ho 49999
• E ts'ehetsa likhokahano tse fihlang ho tse 5 ho li-unit tsa makhoba (tse hlalositsoeng ka parameter ea MaxRemoteTCPClient).
  Sekhahla se phahameng ka ho fetisisa ke 100 ms.

Modbus RTU master unit

• Ha e lokiselitsoe mokhoa oa Modbus RTU Master, LPC-3.GOT.112 e sebetsa e le sesebelisoa se hloahloa, se laolang puisano le lisebelisoa tse ling tsa makhoba tse kang li-sensor, inverters, li-PLC tse ling, joalo-joalo.
• LPC-3.GOT.112 e romela litaelo tsa Modbus RTU ho le ho amohela likarabo tsa Modbus RTU ho tsoa lisebelisoa tsa makhoba.

Litaelo tse latelang lia tšehetsoa:

• 01 - Bala Boemo ba Coil
• 02 – Bala Boemo ba ho Kena
• 03 – Bala Ho Holding Registers
• 04 – Bala Lirekoto tsa Lintho
• 05 - Ngola Coil e le 'Ngoe
• 06 - Ngola Ngoliso e le 'Ngoe
• 15 - Ngola Likhoeli tse ngata
• 16 - Ngola lirekoto tse ngata
• Hlokomela: E 'ngoe le e 'ngoe ea litaelo tsena e khona ho bala/ngola ho fihla ho li-byte tse 246 tsa data. Bakeng sa analoge (Marejiseta a Kenyelletso le Ho Tšoara) sena se bolela boleng ba 123, ha bakeng sa dijithale (Maemo le Likhoele) sena se bolela boleng ba 1968.
• Ha ho hlokahala palo e phahameng ea data, LPC-3.GOT.112 e ka phethahatsa litaelo tse tšehetsoeng tse fihlang ho tse 32 kapa tse fapaneng ka nako e le 'ngoe.
• Boemo ba 'mele: RS-485
• Litefiso tsa baud tse tšehetsoeng: 9600, 19200, 38400, 57600 le 115200bps
• Bonngoe: Ha ho le e 'ngoe, e makatsang, e sa tloaelehang.
• Emisa hanyane: 1
• Modbus RTU sehlopha sa makhoba
• TCP ea Modbus lekhoba le na le liaterese tse 1023 karolong e 'ngoe le e 'ngoe ea memori:
• Likhoele: 00000 ho ea ho 01023
• Litlhahiso tse ikhethang: 10000 ho ea ho 11023
• Ngoliso ea lintho tse kenang: 30000 ho ea ho 31023
• Ho tšoara rejisetara: 40000 ho ea ho 41023
• Sekhahla se phahameng ka ho fetisisa sa scan ke 100 ms.
• Smarteh RS485 bese bakeng sa khokahano le sistimi ea LPC-2
• Port COM2 e sebelisetsoa puisano le li-module tsa makhoba a LPC-2.
• Litlhophiso tsohle tsa puisano li lokiselitsoe lenaneong la software la SmartehIDE.

BACnet IP unit

• Ha e hlophisitsoe bakeng sa BACnet IP (B-ACS), litaelo tse latelang lia tšehetsoa:

Kabo ea Boitsebiso

• ReadProperty-B (DS-RP-B)
• WriteProperty-B (DS-WP-B)

Sesebelisoa le Tsamaiso ea Marang-rang

• Binding-B ea Sesebelisoa se Matla (DM-DDB-B)
• Tlamahanong ea Ntho e Matla-B (DM-DOB-B)
• Taolo ea Puisano ea Sesebelisoa-B (DM-DCC-B)
• Khokahano ea Nako-B (DM-TS-B)
• UTCTimeSynchronization-B (DM-UTC-B)
• Ho fumana lintlha tse ling, ka kopo ikopanye le moetsi.

TSAMAISA/Emisa Phetoho

• Matha: Boemo ba RUN boemo ba "LED" bo bonts'a hore ts'ebeliso ea litšoantšo ea mosebelisi e se e le teng mme lenaneo la mosebelisi le ntse le sebetsa.
• Ema: Ha switch e fetoleloa ho STOP state, RUN boemo ba LED bo "tima" mme ts'ebeliso ea emisoa.

Nako ea potoloho ea mosebetsi oa PLC

• Nako e ka sehloohong ea mosebetsi oa PLC (tlas'a "Project tab" -> Nako ea Mesebetsi ea Lisebelisoa) → → ha e khothalletsoe hore e behoe ka tlase ho 50 ms.

Tlhophiso ea WiFi

1. Hokela terminal ho PC ka sehokelo sa USB ebe o bulela phepelo ea motlakase.
2. Ho sebelisa a web sebatli, ngola aterese ea kamehla ea IP 192.168.45.1 le port 8009.
3. Tobetsa ho "Settings".
4. Leqephe la Litlhophiso lea buleha. Karolong ea "Network Settings for eth() interface (wired)" khetha "Disabled", ho tsoa ho "Mofuta oa Configuration" menu e theoha.
5. Tobetsa "Set" botlaaseng ba karolo eo.
6. Ebe karolong ea "Network Settings for WLAN () interface (wireless)" beha litekanyo tsa marang-rang a se nang mohala ao u batlang ho hokela ho ona: "Mofuta oa tlhophiso", "Mofuta oa netefatso", "Lebitso la marang-rang" le "Password".
7. Tobetsa "Set" botlaaseng ba karolo eo.

Moralo oa GUI le mananeo

• HLOKOMELA: Bonyane boholo bo khothalletsoang ba ntho ea ho ama ke 10 x 10 mm.
• Tlhophiso ea PLC e etsoa ho sebelisoa sesebelisoa sa software sa SmartehIDE. Ka kopo, sheba bukana ea mosebelisi ea SmartehIDE le LPC Manager bakeng sa lintlha.
• Tlhophiso ea PLC e etsoa ho sebelisoa sesebelisoa sa Inkscape se bulehileng.

MODULE LABELING

Tlhaloso ea leibole:

1. XXX-N.ZZZ - lebitso le felletseng la sehlahisoa.
   • XXX-N – Sehlahisoa lelapa
   • ZZZ – sehlahisoa
2. P/N: AAABBBCCDDDEEE - nomoro ea karolo.
   • AAA - khoutu e akaretsang bakeng sa lelapa la sehlahisoa,
   • BBB - lebitso le khuts'oane la sehlahisoa,
   • CCDDD - tatellano ea khoutu,
   • CC - selemo sa ho bula khoutu,
   • DDD - khoutu ea tlhahiso,
   • EEE - khoutu ea mofuta (e boloketsoe lintlafatso tsa nakong e tlang tsa HW le/kapa SW).
3. S/N: SSS-RR-YYXXXXXXXXXXXX - nomoro ea letoto.
   • SSS - lebitso le khuts'oane la sehlahisoa,
   • RR - khoutu ea mosebelisi (mokhoa oa liteko, mohlala, Smarteh person xxx),
   • YY - selemo,
   • XXXXXXXXX– nomoro ea hona joale ea stack.
4. D/C: WW/YY - khoutu ea letsatsi.
   • WW – beke le
   • YY - selemo sa tlhahiso.

Taba ea boikhethelo

1. MAC
2. Matšoao
3. WAMP
4. QR khoutu
5. Tse ding

LIKAROLO TSA TLATSETSO

Bakeng sa ho odara likarolo tse setseng tse latelang Linomoro tsa Karolo li lokela ho sebelisoa.

LPC-3.GOT.112 Terminal ea ts'ebetso ea litšoantšo

LPC-3.GOT.112, skrine e ntšo ea khalase e ntšo P/N: 226GOT23112B01

LIPHETOHO

Tafole e latelang e hlalosa liphetoho tsohle tsa tokomane.

MELAO LE MELAO: Maemo, likhothaletso, melaoana le lipehelo tsa naha eo lisebelisoa li tla sebetsa ho eona, li tlameha ho nahanoa ha ho ntse ho raloa le ho theha lisebelisoa tsa motlakase.
Sebetsa ho 100 .. Marang-rang a 230 V AC a lumelloa ho basebetsi ba nang le tumello feela.
LITEMOSO TSA KOTSI: Lisebelisoa kapa li-module li tlameha ho sireletsoa mongobo, litšila le tšenyo nakong ea lipalangoang, polokelo le ts'ebetso.

TIISETSO

• TIISETSO MAEMO: Bakeng sa li-modules tsohle LONGO LPC-3 - haeba ho se na liphetoho tse etsoang holim'a tsona 'me li kopantsoe ka nepo ke basebetsi ba lumelletsoeng - ho nahanoa ka matla a holimo a lumelletsoeng a ho hokahanya, waranti ea likhoeli tse 24 e sebetsa ho tloha ka letsatsi la thekiso ho isa ho moreki oa ho qetela, empa ha ho joalo. ho feta likhoeli tse 36 kamora ho pepa ho tsoa ho Smarteh. Haeba ho na le likopo ka nako ea tiisetso, tse thehiloeng ho se sebetse hantle ha thepa moetsi o fana ka phetisetso ea mahala.
• Mokhoa oa ho khutlisa module o sa sebetseng hantle, hammoho le tlhaloso, o ka hlophisoa le moemeli oa rona ea lumelletsoeng.
• Tiisetso ha e kenyeletse tšenyo e bakoang ke lipalangoang kapa ka lebaka la melaoana e lumellanang e sa nahanoang ea naha, moo module e kenngoa teng.
• Sesebediswa sena se tlameha ho hokelwa ka nepo ke sekema sa kgokelo se fanoeng bukeng ena. Ho se hokahane ho ka baka tšenyo ea sesebelisoa, mollo, kapa kotsi ea motho.
• Voltage ka sesebelisoa e ka baka ts'okelo ea motlakase mme e ka baka kotsi kapa lefu.

LE KA mohla U SE KE UA SEBELETSA SEHLAHISO ENA!

• Sesebelisoa sena ha sea lokela ho kenngoa lits'ebetsong tsa bohlokoa bophelong (mohlala, lisebelisoa tsa bongaka, lifofane, joalo-joalo).
• Haeba sesebelisoa se sebelisoa ka mokhoa o sa boleloang ke moetsi, tekanyo ea tšireletso e fanoeng ke thepa e ka 'na ea senyeha.
• Lisebelisoa tsa motlakase le tsa elektroniki tse litšila (WEEE) li tlameha ho bokelloa ka thoko!

LPC-3 e lumellana le litekanyetso tse latelang:

• EMC: EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, 61000-3-3:2013
• Smarteh doo e sebetsa leano la nts'etsopele e tsoelang pele.
• Ka hona re na le tokelo ea ho etsa liphetoho le lintlafatso ho efe kapa efe ea lihlahisoa tse hlalositsoeng bukeng ena ntle le tsebiso pele.

MOHLAHLISI:

• SMARTEH doo
• Poljubinj 114
• 5220 Tolmin
• Slovenia
• SMARTEH doo Poljubinj 114 5220 Tolmin Slovenia
• Mohala: +386038844 00
• lengolo-tsoibila: info@smarteh.si
• www.smarteh.si

Litokomane / Lisebelisoa

SMARTEH LPC-3.GOT.112 Longo Programmable Controller [pdf] Bukana ea Mosebelisi LPC-3.GOT.112 Longo Programmable Controller, LPC-3.GOT.112, Longo Programmable Controller, Programmable Controller, Controller

Litšupiso

• Bukana ea Mosebelisi