SALTO Systems XS4 Ntlafatsa le ho Ntlafatsa Taolo ea phihlello
Lintlha le Litlhoko
| Paramethara | Max | E tloaelehileng |
|---|---|---|
| Keletso Voltage (Khamera) | 5V | - |
| Keletso Voltage (Setsi sa Taolo) | 12V | - |
| Tšebeliso ea Hona Joale (Sistimi) | 415mA @ 12V | 12V |
| Mofuta | Max Length |
|---|---|
| Phepelo ea Matla ka Ntle | 2 core, 3m |
| Control Unit to Camera XS4 Face | 3m |
| Setsi sa Taolo ho Seva / Network switch | Cat 5e, 100m |
| Paramethara | Min | Max |
|---|---|---|
| Mocheso | 0°C | 60°C |
| Mongobo | 0% | 80% e sa fokotseng |
| Ntho | Tlhokahalo |
|---|---|
| VLAN | Ho hlokahala LAN e ka thoko (V) LAN bakeng sa lik'hamera le linotlolo kaofela. |
| Litšobotsi Tsa 'Mele | Netweke ea Cat 5e kapa Cat 6 e nang le li-switches tsa Gigabit. |
| IP Subnet | Must be large enough to allocate addresses to all locks, camera units, and servers/controllers. Must not be in the range: 172.31.255.0/24 |
| Libaka tse Tsoang | Restrict to: 123 – NTP, 443 – HTTPS/TLS, 8883 – MQTT / mTLS. Should only permit XS4 Face servers to access outbound ports. XS4 Face devices do not require access outside of the VLAN. |
| DHCP | Required to provide IP addresses to XS4 Face devices. XS4 Face server must have a reserved IP address that cannot change once devices are commissioned. |
| DNS | XS4 Face Server e tla hloka ho fihlella DNS. |
| Cameras per Server | 100 cameras per server. Ensures sub 2-second response time for all users concurrently (within a 10-second window). |
| CPUs / Memory | Min. 3.6 GHz, 16 vCPU, 32 GB Memory. Ensures sub 2-second response time for all users concurrently. |
| Polokelo | Mirrored SSD – 480GB. Strongly recommended that physical storage is encrypted. |
| Meaho | Intel/AMD x64 |
| Mokhoa oa tšebetso | Ubuntu Minimal Install 22.04 LTS. Install process hardens server, installs/configures firewall and OS updates. |
| Tsamaiso ea ho laola ho kena | For integration with SPACE (minimum version 6.9 with SPACE) OPT-0018 (SHIP interface). |
Ho nahanela
Batsamai ba Fetang
Pedestrians passing too close to an XSA Face Camera mau initiate the recognition sequence. There are situations where this may be unavoidable, for example, busg corridors. However, in such cases, it mau be advantageous ho fetola hanyane boholo boo sensor e hlahisoang ho eona, e hlokang basebelisi ho ema haufi le khamera hanyane. Sena se ka thusa ho fokotsa mojaro o sa hlokahaleng holim'a marang-rang. 
Maemo a Lebone
Maemo a kh'amera le maemo a mabone a tlameha ho nahanoa ka hloko tlhahlobong ea pele ho instola pele ho kenya XS4 Face Camera kantle. Khamera ea Sefahleho ea XS4 e hloka boemo bo tlase ba khanya ea 10 Lux sefofaneng se emeng, 600mm ho tsoa ho Khamera ea Sefahleho ea XS4. Maemong a tlaase a khanya, (mohlala, ka ntle bosiu) mabone a lokela ho khantša sefahleho sa mosebedisi ka ho lekana. 
Likoloi tse Fetang
Vehicles passing too close to the XS4 Face camera mag initiate the recognition sequence. In a situation such as a busg road this could cause unnecessary load upon the network. Cameras should be positioned such that there is a minimum Of 2m between the XS4 Face Camera and ang adjacent roadway.
Ho nahanela
Ho beha maemo
Ho bohlokoa ho beha Khamera ea Sefahleho sa XS4 bophahamong bo boletsoeng. Khamera e etselitsoe ho sebetsa hantle bakeng sa basebelisi ho tloha ho 5th %ile ea basali ba baholo, ho isa ho 95th % ea banna ba baholo le ho tloha ho 300mm ho isa ho 600mm.
https://www.un.orq/esa/socdev/enable/designm/AD5-02.htm
Ho Amohela Bokooa
Moo ho fihlellehang sebaka sa batho ba holofetseng ka setulo sa likooa, XS4 Face Camera e tla hloka hore e behoe ka tlase hanyane, kapa ho kenngoe lik'hamera tse peli.
Ho na le eng ka lebokoseng?
Tsamaisa Cable ea RJ45 ho ea Thabeng ea Lerako la Khamera ho etsa bonnete ba hore sebaka se tlase sa 60mm se kobehile. Ho khethoa radius e kholoanyane. Netefatsa hore ha ho na khatello ho khokahanyo ea thapo. 
Add ferrites as shown to the Control Unit end of the Network Cable.
Hlokomela: Do not fit the ferrites to the (blue) Camera Cable. 
TLHOKOMELISO: After attaching to the camera casing the distance sensitivity cannot be adjusted. A final layer of protection and integrity is provided by this cover. Therefore, take special care to ensure that the cover is stuck correctly to the full surface of the camera casing.
FAQs
What should I do if pedestrians or vehicles trigger the camera unnecessarily?
You can adjust the sensor's dimension or position the camera to minimize unwanted triggers.
What are the contents of the XS4 Face package?
The package includes XS4 Face Face Plate, XS4 Face Camera, XS4 Face Wall Mount (x4), Bung, and XS4 Face 3 meter Cat 6A S/FTP LSZH Blue cable.
Litokomane / Lisebelisoa
 |
SALTO Systems XS4 Ntlafatsa le ho Ntlafatsa Taolo ea phihlello [pdf] Tlhophiso Tataiso 228189, 228189, XS4 Ntlafatsa le ho Ntlafatsa Taolo ea Phihlello, XS4, Ntlafatsa le ho Ntlafatsa Taolo ea Phihlello, Taolo ea Phihlelo ea sejoale-joale, Taolo ea Phihlello, Taolo. |