Roger Access Control System
Buka ea ho kenya OSR80M-BLE
Mofuta oa Firmware: 1.0.8.205 le ho feta
Phetolelo ea litokomane: Rev.E

Tokomane ena e na le lintlha tse fokolang tse hlokahalang bakeng sa ho seta le ho kenya sesebelisoa. Tlhaloso e qaqileng ea li-parameter tsa tlhophiso le mesebetsi e boletsoeng ho Bukana ea Ts'ebetso e fumanehang ho www.roger.pl.

LIEKETSENG

Terminal e etselitsoe ts'ebetso e nang le controller e nang le interface eaOSDP. Ka hona, terminal e ka sebelisoa lits'ebetsong tsa motho oa boraro. Incase ea sistimi ea RACS 5 terminal e ka hokahana le taolo ea phihlello ea MC16 ka sebopeho sa MCI-3. Terminal e ncha ea feme e hlophisoa ka litlhophiso tsa kamehla tse kenyelletsang OSDP ID=0 aterese.

TLHOKOMELISO KA LENANEO LA ROGERVDM

Setšoantšo sa 1 Khokahano ea terminal ea OSR ho sebopeho sa RUD-1.

Mokhoa oa ho hlophisa:

1. Kopanya sesebelisoa ho RUD-1 interface (sa feiga. 1) 'me u kopanye RUD-1 ho koung ea USB ea k'homphieutha.
2. Tlosa jumper ho tsoa ho mabitso a MEM (setšoantšo sa 2) haeba se behiloe moo.
3. Qala sesebelisoa bocha (feela phepelo ea matla le ho tima) 'me orange LED SYSTEM e tla phunya. Ebe ka mor'a metsotsoana e 5 beha jumper ho mabitso a MEM.
4. Qala lenaneo la RogerVDM, khetha sesebelisoa sa OSR, mofuta oa firmware oa v1.0, mocha oa puisano oa RS485 le sekepe sa serial se nang le RUD-1 interface.
5. Tobetsa Connect, lenaneo le tla theha khokahanyo 'me e tla hlahisa tab ea Configuration ka bo eona.
6. Hlalosa aterese ea OSDP e sa sebetseng ka har'a 0-126 le litlhophiso tse ling ho latela litlhoko tsa ts'ebetso e khethehileng.
7. Tobetsa Romela ho Sesebediswa ho ntlafatsa tlhophiso ya sesebediswa.
8. Ka boikhethelo etsa bekapo ka ho tobetsa Romela ho File… le ho boloka li-setting ho file ka disk.
9. Hamola ho RUD-1 interface 'me u tlohele jumper ho mabitso a MEM.

Hlokomela: Se ke oa bala likarete leha e le life ha sebali se lokiselitsoe ka RogerVDM.

TS'ELISO KHABANE

Mokhoa oa ho sebetsana le aterese o thusa ho hlophisa aterese e ncha ea OSDP 'me litlhophiso tse ling kaofela li sa fetohe.

Mokhoa oa ho lokisa ka letsoho:

1. Tlosa likhokahano tsohle ho tloha meleng ea A le ea B.
2. Tlosa jumper ho tsoa ho mabitso a MEM (setšoantšo sa 2) haeba se behiloe moo.
3. Qala sesebelisoa bocha (feela phepelo ea matla le ho tima) 'me orange LED SYSTEM e tla phunya. Ebe ka mor'a metsotsoana e 5 beha jumper ho mabitso a MEM.
4. Kenya linomoro tse 3 tsa aterese ea OSDP ho tloha ho 0-126 ka karete efe kapa efe ea MIFARE.
5. Tlohela jumper ho mabitso a MEM.
6. Qala hape sesebelisoa.

Li-terminals tse se nang keypad li ka rarolloa ka ho bala likarete tse ngata moo palo ea N ea ho bala e etsisang nomoro ea aterese. Letoto le le leng la ho bala ka karete efe kapa efe ea MIFARE e haufi ea hlokahala ho beha aterese. Ka mor'a letoto le leng le le leng emela li-beep tse peli 'me u tsoele pele ka nomoro e latelang. Noto e etsisoa ka lipalo tse 10.

ExampLe:
Lenaneo la ID=001 aterese e nang le palo ea likarete:

1. Bala karete ea 10 ebe u emela li-beep tse peli.
2. Bala karete ka makhetlo a 10 ebe u emela li-beep tse peli.
3. Bala karete ea 1 ebe u emela li-beep tse peli.
4. Ema ho fihlela 'mali a qala hape ka aterese e ncha.

KHOPOTSO RESE

Mokhoa oa ho seta memori o seta bocha li-setting tsohle hore e be tsa kamehla tsa feme ho kenyeletsoa ID=0 aterese.

Mokhoa oa ho tsosolosa memori:

1. Tlosa likhokahano tsohle ho tloha meleng ea A le ea B.
2. Tlosa jumper ho tsoa ho mabitso a MEM (setšoantšo sa 2) haeba se behiloe moo.
3. Qala sesebelisoa bocha (feela phepelo ea matla le ho tima) 'me orange LED SYSTEM e tla phunya. Ebe ka mor'a metsotsoana e 5 beha jumper ho mabitso a MEM.
4. Bala karete efe kapa efe ea MIFARE makhetlo a 11.
5. Ema ho fihlela sesebelisoa se netefatsa hore se tla beoa bocha ka lets'oao le lelelele la acoustic.
6. Tlohela jumper ho mabitso a MEM.
7. Qala hape sesebelisoa.

LIEKETSENG FIRMWARE

Firmware ea sesebelisoa e ka fetoloa ho mofuta o mocha kapa oa khale. Ntlafatso e hloka khokahanyo khomphuteng ka sebopeho sa RUD-1 (sa feiga. 1) le ho qala software ea RogerVDM. Firmware ea morao-rao file e fumaneha ho www.roger.pl.

Hlokomela: Tlhophiso ea bekapo ka software ea RogerVDM pele ho ntlafatso ea firmware hobane ntlafatso e tla khutlisetsa litlhophiso tsa kamehla tsa feme.
Hlokomela: Haeba sebopeho sa mofuta oa MCI-3 se hoketsoe ho terminal, se tlameha ho khaoloa nakong ea ntlafatso ea firmware.

Mokhoa oa ho ntlafatsa firmware:

1. Kopanya sesebelisoa ho RUD-1 interface (sa feiga. 1) 'me u kopanye RUD-1 ho koung ea USB ea k'homphieutha.
2. Beha jumper ho mabitso a MEM (setšoantšo sa 2).
3. Qala sesebelisoa bocha (tlohela phepelo ea motlakase e tima le ho e bula).
4. Qala lenaneo la RogerVDM 'me ho menu e ka holimo khetha Lisebelisoa ebe u Nchafatsa firmware.
5. Ka fensetere e butsoeng, khetha mofuta oa sesebelisoa, koung ea serial e nang le sebopeho sa RUD-1 le tsela ea firmware file (*.frg).
6. Tobetsa Update ho qala firmware upload le progress bar ka tlase.
7. Ha apdeite e felile, khaola sebopeho sa RUD-1. Ho phaella moo, ho kgothaletswa ho qala ts'ebetso ea ho tsosolosa mohopolo.

HLOMELO

Setšoantšo sa 2 Pulo ea sebaka se koaletsoeng le sebaka sa kopano ea litšebeletso.

Tafole 1. Lithapo
Lebitso	'Mala oa mohala	Tlhaloso
12V	Khubedu	Phano e eketsa
GND	Ntsho	Fatše
A	Bosehla	OSDP bese, mola A
B	Botala	OSDP bese, line B

Lethathamo la 2. Tlhaloso
Phepelo voltage	Lebitso la 12VDC, min./max. mefuta ea 10-15VDC
Tšebeliso ea hajoale (karolelano)	~ 70 mA
Tamper tshireletso	Ho tlalehile hore ho buloe ka har'a sebaka sa ho kena
Mekhoa ea ho tsebahatsa	13.56MHz MIFARE Ultralight, Classic, Plus le DESFire (EV1, EV2, EV3) likarete tsa haufi Lisebelisoa tsa mohala (Android) tse nang le NFC Lisebelisoa tsa mohala (Android, iOS) tse nang le BLE (Bluetooth Low Energy) v4.1
Sebaka sa ho bala	Ho fihla ho 7 cm bakeng sa likarete tsa MIFARE le NFC Ho fihla ho 10 m bakeng sa BLE - ho ipapisitse le maemo a tikoloho le sesebelisoa se itseng sa mohala. Terminal's matla a seea-le-moea a ka eketsoa ka har'a tlhophiso ea boemo bo tlase.
Sebaka	Ho fihla ho 1200 m bolelele ba libese lipakeng tsa molaoli le terminal (OSDP)
Khoutu ea IP	IP65
Khoutu ea IK	IK06
Sehlopha sa tikoloho (ho ea ka EN 50133-1)	Sehlopha sa IV, maemo a akaretsang a kantle, mocheso: -25°C ho ea ho +60°C, mongobo o lekanyelitsoeng: 10 ho isa ho 95% (ha ho condensation)
Litekanyo H x W x D	100 x 45 x 16 limilimithara
Boima ba 'mele	~ 100g
Litifikeiti	CE, RoHS

Setšoantšo sa 3 Khokahano e tloaelehileng ea 'mali ho molaoli

LIEKETSENG MATS'ELA

• Terminal e lokela ho kenngoa holim'a mohaho o otlolohileng (lerako) hole le mehloli ea mocheso le mongobo.
• Phanele e ka pele e lokela ho hokelloa ka tsela e kang ea tamper detector e ne e tla tobetsa ka thata phanele e ka morao.
• Likhokelo tsohle tsa motlakase li lokela ho etsoa ka phepelo ea motlakase e khaotsoeng.
• Haeba terminal le molaoli li sa fanoe ho tsoa ho PSU e le 'ngoe, joale liteishene tsa GND tsa lisebelisoa ka bobeli li tlameha ho hokahana le terata efe kapa efe.
• Sesebelisoa se ka hloekisoa ka lesela le metsi le sesepa se bonolo se se nang likarolo tsa abrasive. Ka ho khetheha u se ke ua hloekisa ka lino tse tahang, li-solvents, peterole, li-disinfectants, li-acids, li-removers tsa mafome, joalo-joalo.
• Haeba sesebelisoa se kentsoe sebakeng se pepesehileng lerole la conductive (mohlala, lerōle la tšepe), lithakhisa tsa MEM li lokela ho sireletsoa ka boima ba polasetiki, mohlala, silicone, kamora ho kenya.
• Haeba sebali se kentsoe linaheng tsa EU, boemo ba matla a seea-le-moea sa BLE (li-parameter: BLE broadcasting power [dBm] le BLE transmission power [dBm]) li lokela ho hlophisoa ho 1(-18dBm).

Letšoao lena le behiloeng holim'a sehlahisoa kapa sephutheloana le bontša hore sehlahisoa ha sea lokela ho lahloa le litšila tse ling kaha sena se ka ba le phello e mpe tikolohong le bophelong bo botle. Mosebelisi o tlamehile ho isa lisebelisoa libakeng tse khethiloeng tsa pokello ea litšila tsa motlakase le tsa elektroniki. Bakeng sa lintlha tse felletseng mabapi le ho sebelisa hape, ikopanye le ba boholong sebakeng sa heno, k'hamphani ea ho lahlela lithōle kapa moo u rekang teng. Pokello e arohaneng le ho sebelisoa bocha ha mofuta ona oa litšila ho kenya letsoho ts'ireletsong ea lisebelisoa tsa tlhaho 'me ho bolokehile ho bophelo bo botle le tikoloho. Boima ba thepa bo hlalositsoe tokomaneng.

Ikopanye le:
Roger Sp. oa sp. k.
82-400 Sztum
Setšoantšo sa 59
Mohala: +48 55 272 0132
Fax: +48 55 272 0133
Theknoloji. tšehetso: +48 55 267 0126
E-mail: support@roger.pl
Web: www.roger.plBuka ea ho kenya OSR80M-BLE.doc
2024-03-28

Litokomane / Lisebelisoa

roger OSR80M-BLE Proximity Reader [pdf] Tlhophiso Tataiso OSR80M-BLE, OSR80M-BLE Proximity Reader, Proximity Reader, Reader

Litšupiso

• Bukana ea Mosebelisi