Sistimi ea Taolo ea phihlello ea Roger MCX2D
Litlhaloso
| Tlhaloso | |
| Phepelo voltage | 13.8VDC; +/- 100mV (betri ea bekapo e hokahane) 12.0VDC (ha ho na betri ea bekapo) |
| Tšebeliso ea hajoale (e tloaelehileng) | MCX2D: 50mA (mojule ea atolosoa) + betri e tjhajang hajoale + liphetho (VOUT, AUX, TML, VDR) |
| Nako ea ho tjhaja betri | E ka hlophisoa: ~0.3A/0.6A/0.9A |
| Lintho tse kenang | Lisebelisoa tse 'nè (DCx, DRx) tsa parametric |
| Liphetho tsa Transistor | Liphetho tse 'ne (LCKx, BELLx), e' ngoe le e 'ngoe e na le 15V/1A DC max load |
| Liphello tsa phepelo ea motlakase | Liphetho tse peli tsa 13.8VDC/0.2A (VOUT, AUX) Liphetho tse peli tsa 13.8VDC/0.2A (TML)
Liphetho tse peli tsa 13.8VDC/1.0A (VDR) |
| Libaka | Ho fihla ho 1200 m pakeng tsa molaoli oa MC16 le MCX expander (RS485). Ho fihla ho 1200 m lipakeng tsa MCX expander le MCT terminals (RS485)
Kakaretso ea sebaka se pakeng tsa molaoli le terminal efe kapa efe e ke ke ea feta 1200m. |
| Tikoloho | Maemo a tloaelehileng a ka hare, mocheso: +5 ° C ho +40 ° C, mongobo o lekanyelitsoeng: 10 ho
75% (ha ho na condensation) |
| Litekanyo W x S x G | 80 x 80 x 20 limilimithara |
| Boima ba 'mele | 65 g |
| Sehlopha sa EN55032 | A |
| Ho latela melao | CE, RoHS |
Litaelo tsa Tšebeliso ea Sehlahisoa
Tokomane ena e tlas'a Melao ea Tšebeliso ea phetolelo ea hona joale e hatisitsoeng ho websebaka www.roger.pl.. Moetsi o na le tokelo ea ho etsa liphetoho ho sehlahisoa ntle le tsebiso pele.
MOTS'EOA LE KOPO
MCX2D ke sesebelisoa sa I/O se inehetseng ho sistimi ea RACS 5. Sesebelisoa, ka mor'a hore se hokahane le molaoli oa phihlello oa MC16 le li-terminals tsa MCT, se khona ho laola mamati a mabeli. Morekisi o fana ka li-I/Os mme o aba phepelo ea motlakase le bese ea puisano ea RS485. Sesebelisoa se sebetsa ka betri ea bekapo, eo,,, ho latela tlhoko e itseng, e ka lefisoang ka 0.3A, 0.6A, kapa 0.9A hajoale. Sesebelisoa sa ho atolosa se na le li-terminal blocks tse khonang ho tlosoa, tse thusang ho hokahanya ha motlakase nakong ea ho kenya le ho lokisa. MCX2D expander e fanoa ka thoko e le module ea elektroniki bakeng sa ho kenngoa ntlong ea tšepe e nang le motlakase kapa karolo ea MC16-PAC-2-KIT.
Litšobotsi
- RACS 5 tsamaiso ea I/O expander
- Kabo ea phepelo ea motlakase bakeng sa lisebelisoa tsa mamati
- Kabo ea libese ea RS485 bakeng sa liteishene tsa MCT
- 4 lisebelisoa tsa parametric (EOL).
- Liphetho tse 4 tsa transistor
- Liphello tse 6 tsa phepelo ea motlakase
- Boloka ho tjhaja betri
- RS485 sebopeho
- Li-terminal tsa screw tse ka tlosoang
Phepelo ea motlakase
Sehlahisoa se hloka phepelo ea motlakase ea 13.8VDC, 'me ho khothaletsoa ho sebelisa yuniti ea phepelo ea motlakase ea PS2D molemong oo. Ka lebaka la boemo bo phahameng bo batlang bo le teng lipakeng tsa sehokelo le PSU, likhokahano tsohle li lokela ho etsoa ho sebelisoa likhoele tse khutšoane tse nang le likarolo tse lekaneng tsa sefapano. Li-PSUs tsa PSxD (Roger) li fanoa ka likhoele tse peli tsa 30cm/1mm² tse inehetseng ho fana ka sehole. Lisebelisoa tse ngata tsa MCX2D li ka fanoa ho tsoa ho PSU e tšoanang, 'me maemong a joalo, khokahanyo e' ngoe le e 'ngoe e tlameha ho etsoa ka lithapo tse peli. Ha phepelo ea morekisi voltage tlase haholo, betri e ke ke ea tjhajoa ka botlalo, le ha voltage phahame haholo, betri e ka senyeha. MCX2D, e fanoang ho tsoa ho PSU e nang le bekapo ea eona (mohlala, UPS), e ka fanoa ka 12VDC, empa ha e khone ho ba le betri ea eona ea bekapo.
Setšoantšo sa 1 Lisebelisoa tse peli tsa MCX2D tse fanoeng ho tsoa ho PSU e tšoanang
Betri ea bekapo
MCX2D e thusa ho tjhaja betri ka 0.3A, 0.6A, kapa 0.9A hajoale ho fihla boemong ba vol.tage nehelanoa ka expander (ka lebitso 13.8VDC). Hona joale e khethoa ka li-jumpers (setšoantšo sa 2). Ha betri e phahamatage theohela ho hoo e ka bang 10V, e khaotsoe ho tloha ho expander. Betri e hokelloa hape ha phepelo ea 13.8V ho ea ho atolosoa e khutlisoa. Ho netefatsa hore betri e tjhaja ho fihla boemong ba 80% nakong ea lihora tse 24 (ho latela maemo a EN 60839) ho tlameha ho sebelisoa litlhophiso tse latelang tsa hajoale:
- 300mA bakeng sa betri ea 7Ah
- 600mA bakeng sa betri ea 17Ah
- 900mA bakeng sa betri ea 24Ah
RS485 sebopeho
- MCX2D ke sesebelisoa se khonang ho sebetsana le aterese se hoketsoeng ho bese ea likhokahano ea RS485 ea molaoli oa MC16. Ka nako e ts'oanang, morekisi o tsamaisa bese ho liteishene tsa MCT monyako o mong le o mong. Atolosa e ka sebetsoa ka aterese ea kamehla ea ID=100, kapa e ka abeloa aterese ea 101-115. Lisebelisoa tsohle tse beseng ea RS485 ea molaoli oa MC16, ho kenyeletsoa lisebelisoa tsa MCX le li-terminals tsa MCT, li tlameha ho ba le liaterese tse ikhethileng lipakeng tsa 100-115. MCX2D e rarolloa nakong ea tlhophiso ea boemo bo tlase ka software ea RogerVDM kapa ka letsoho nakong ea ts'ebetso ea ho seta memori.
- Maemong a mangata, puisano e sebetsa le mofuta ofe kapa ofe oa mohala (thapo e tloaelehileng ea mohala, e sirelelitsoeng kapa e sa sirelelitsoeng e sothehileng, joalo-joalo), empa mohala o khothalelitsoeng ke para e sothehileng e sa sireletsehang (U / UTP cat 5). Lithapo tse sirelelitsoeng li lokela ho lekanyetsoa lits'ebetsong tse nang le tšitiso e matla ea motlakase Tekanyetso ea puisano ea RS485 e sebelisoang tsamaisong ea RACS 5 e tiisa puisano e nepahetseng sebaka sa ho fihla ho limithara tse 1200, hammoho le khanyetso e phahameng ea ho kena-kenana le tšitiso. ea karolo efe kapa efe e nyane ea sefapano.
Lipontšo tsa LED
Li-expander li na le matšoao a LED, a sebelisetsoang ho bontša mesebetsi ea bohlokoa. Ho latela lits'ebetso tse boletsoeng, mokhoa oa ts'ebeletso o qalisoa ka ho qala setsi sa ho atolosa bocha le ho beha jumper ho mabitso a MEM.
Letlapa la 1. Lipontšo tsa LED
| Letlapa la 1. Lipontšo tsa LED | ||
| Sesupo | Mmala | Mesebetsi e ka sehloohong |
| ACL | Khubedu | Ka mokhoa o tloaelehileng, LED e bonts'a phepelo ea matla ea "backup" ho tsoa ho betri ho fapana le PSU. |
|
MATSHA |
Khubedu |
Mothapo o le mong metsotsoana e meng le e meng e 4, mokhoa o tloaelehileng, Ho otla ka potlako: mokhoa oa ts'ebeletso
Ho phunya butle (0.5s/0.5s): Ha ho puisano le molaoli Ho phunya butle haholo (1s/1s): Phoso ea mohopolo oa tlhophiso
Haeba ho ka tsosolosoa Memori, LED ena e sebelisetsoa ho sebetsana le aterese ka letsoho. |
| TXD | Khubedu | LED e bonts'a phetiso ea data ho molaoli |
| RXD | Botala | LED e bonts'a data e amohetsoeng ho tsoa ho molaoli |
| VDR, TML, VOUT, AUX | Botala | LED e bontša voltage ka tlhahiso e itseng. |
| LCK, SEBELE | Khubedu | LED e buletsoe ha tlhahiso ea LCK e tsamaellanang e buletsoe. |
Lintho tse kenang
Expander e fana ka lisebelisoa tsa parametric tsa DC le DR tsa NO, NC, 3EOL/DW/NO, le 3EOL/DW/NC mofuta. Mefuta ea ho kenya le lisebelisoa tsa motlakase, tse kang nako ea ho arabela le li-resistant parametric, li hlalosoa ka har'a tlhophiso ea boemo bo tlaase (VISO v2 kapa RogerVDM). Mesebetsi ea ho kenya e abeloa ka har'a tlhophiso ea boemo bo holimo (VISO). Mesebetsi e mengata e ka abeloa ho kenya letsoho ka nako e le 'ngoe. Boemong bo tloaelehileng ba taolo ea mamati, li-input tsa DC li nehetsoe khokahanong ea mabitso a mamati, ha li-input tsa DR li nehetsoe khokahanong ea likonopo tsa ho tsoa, 'me ha li hloke tlhophiso ea boemo bo tlase kaha li ka sebetsoa ka litlhophiso tsa kamehla:
- Lisebelisoa tsa DC: Mofuta oa NC / 50ms nako ea karabo
- Lintlha tsa DR: HA HO mofuta / 50ms nako ea karabo
Letlapa la 2. Mefuta ea ho kenya
- HA HO tlhahiso e ka bang maemong a tloaelehileng kapa a ho qala. Boemong bo tloaelehileng, likhokahano tsa CA lia buloa. Ho kenya letsoho ho bakoa ke ho koala mabitso a CA.
- Kenyelletso ea NC e ka ba maemong a tloaelehileng kapa a qalileng. Boemong bo tloaelehileng, likhokahano tsa CA lia koaloa. Ho kenya letsoho ho bakoa ke ho buloa ha mabitso a CA.
- 3EOL/DW/NO input e sebetswa ka tsela eo ho kwala ha mabitso a CA ho tolokoang e le ho hlohlelletsa tlhahiso ya pele, ha ho kwala ha CB ho tolokoa e le ho qalella ho kenya letsoho la bobedi. Ho software ea VISO mofuta oa ho kenya oa DW o emeloa ke lisebelisoa tse peli tse ikemetseng. E 'ngoe le e' ngoe e ka sebelisoa bakeng sa morero o fapaneng 'me ea abeloa mesebetsi e fapaneng.
- 3EOL/DW/NC input e sebetswa ka tsela eo ho bulwa ha dikhokahano tsa CA ho tolokwang e le ho tsosa tlhahiso ya pele, ha ho bula CB ho tolokoa e le ho hlasimolla ha ho kenya letsoho la bobedi. Ka har'a mofuta oa tlhahiso ea software ea VISO ea DW e emeloa ke lintho tse peli tse ikemetseng. E 'ngoe le e' ngoe e ka sebelisoa bakeng sa morero o fapaneng 'me ea abeloa mesebetsi e fapaneng.
Li-resistors tsa Parametric
Litekanyetso tse tšoanang tsa li-resistors tsa parametric li sebelisoa bakeng sa lisebelisoa tsohle, ke hore,. 1kΩ; 1,2kΩ; 1,5kΩ; 1,8kΩ; 2,2kΩ; 2,7kΩ; 3,3kΩ; 3,9kΩ; 4,7kΩ; 5,6kΩ; 6,8kΩ; 8,2kΩ; 10kΩ; 12kΩ. Tabeng ea 3EOL/DW (Double Wiring) mofuta oa ho kenya, Alarm A resistor e hlalosa boleng ba mohanyetsi bo sebelisetsoang ho lemoha ho ts'oanela ho kenya letsoho la pele, ha Alarm B resistor e hlalosa boleng ba khanyetso bo sebelisetsoang ho lemoha ho qala ho kenya letsoho la bobeli. Theko ea Alamo ea Alamo e tlameha ho fapana le boleng ba Alamo B bonyane ka maemo a mararo lenaneng le kaholimo. Kakaretso ea khanyetso ea terata e sebelisoang ho hokahanya mabitso ho kenya letsoho ha ea lokela ho feta 100 Ω. Maemo a kamehla a li-resistors tsa parametric:
- Alamo A = 2,2 kΩ
- Alamo B = 5,6 kΩ
- Tamper = 1,0 kΩ
Nako ea ho arabela
Paramethara ea nako ea karabelo e hlalosa nako e nyane ea ts'usumetso ho kenyelletso e hlahisang tlhahiso. Kenyelletso ka 'ngoe e ka hlophisoa ka bonngoe ho tloha ho 50 ho isa ho 5000 ms ka har'a tlhophiso ea boemo bo tlase (VISO v2 kapa RogerVDM).
Liphetho tsa Transistor
Expander e fana ka lihlahisoa tsa LCK le BELL transistor. Litekanyetso tsa motlakase tse kang polarity li lokiselitsoe ho n tlhophiso ea boemo bo tlase (VISO v2 kapa RogerVDM). Mesebetsi e abeloa liphetho ka har'a tlhophiso ea boemo bo holimo (VISO). Mesebetsi e mengata e nang le lintho tse tlang pele tse fapaneng e ka abeloa tlhahiso e tšoanang ka nako e le 'ngoe. Boemong bo tloaelehileng ba ho laola menyako, liphello tsa LCK li neheloa ho laola liloko tsa menyako, ha lihlahisoa tsa BELL li neheloa ho laola lisebelisoa tsa pontšo ea alamo le / kapa litloloko tsa menyako. Boemong bo tloaelehileng ba ts'ebetso, liphetho tsa LCK le BELL ha li hloke tlhophiso ea boemo bo tlase.
Liphello tsa phepelo ea motlakase
Expander e fana ka liphetho tse 6 molemong oa ho fana ka phepelo ea motlakase ho molaoli oa phihlello, liteishene, senotlolo sa mamati le lisebelisoa tse ling tsa kantle.
Liphetho tsa VDR
Phatlalatso ea phepelo ea motlakase ea VDR e etselitsoe ho fana ka senotlolo sa lemati, sesebelisoa sa alamo le lisebelisoa tse ling tse amanang le mamati. Terminal VDR+ e sirelelitsoe ka fuse ea elektroniki ea 1.0A. Terminal VDR e khutsufalitsoe ka hare ho ea fatše (GND). Letšoao le letala la LED le fumaneha boemelong ba VDR+ ho bonts'a voltage ka sephetho.
Liphetho tsa TML
Phatlalatso ea phepelo ea motlakase ea TML e etselitsoe ho fana ka babali monyako. Terminal TML+ e sirelelitsoe ka fuse ea elektroniki ea 0.2A. Terminal TML e khutsufalitsoe ka hare ho ea fatše. Letšoao le letala la LED le fumaneha setsing sa TML+ ho bonts'a voltage ka sephetho.
TLHOKOMELO t
Phallo ea motlakase ea OUT e etselitsoe ho fana ka li-module tse eketsehileng tsa elektroniki, hape e ka sebelisoa ho fana ka molaoli oa phihlello o hokahaneng. Terminal VOUT+ e sirelelitsoe ka fuse ea elektroniki ea 0.2A. The terminal VOUT- e khutsufalitsoe ka hare ho ea fatše. Letšoao le letala la LED le fumaneha setsing sa VOUT+ ho bonts'a voltage ka sephetho.
- Hlokomela: Haeba molaoli oa phihlello oa MC16 o fanoe ho tsoa ho morekisi, joale e ke ke ea fanoa ka nako e ts'oanang ke PSU ea eona, 'me e ke ke ea sebetsa ka betri ea eona ea "backup".
Tlhahiso ea AUX.
Phatlalatso ea phepelo ea motlakase ea AUX e etselitsoe ho fana ka li-module tsa boikhethelo tsa elektroniki. Terminal AUX+ e sirelelitsoe ka fuse ea elektroniki ea 0.2A. The terminal AUX- e khutsufalitsoe ka hare ho ea fatše. Letšoao le letala la LED le fumaneha setsing sa AUX+ ho bonts'a voltage ka sephetho.
KEKETSO
The expander e lokela ho kenngoa ka har'a tšepe ea tšepe e nang le lemati le motlakase. Sebaka se kampetsoeng se tlameha ho koaheloa ka terata ea PE. Moetsi o fana ka mefuta e mengata ea likoti tse etselitsoeng li-module tsa elektronike le tse nang le lisebelisoa tsa motlakase. Sebaka sa ho kenya se lokela ho ba hole le mehloli ea mocheso le mongobo 'me se sirelelitsoe ho fihlella ntle le tumello. Khokahano lipakeng tsa phepelo ea motlakase le sepharalatsi e lokela ho etsoa ka thapo e nang le karolo e ka tlase ho 0.5 mm² le bolelele ba ho fihla ho 50 cm. Motlakase oa letoto la PSxD o tla le likhoele tse nang le karolo e fapaneng ea 1 mm² le bolelele ba 30 cm, tse ka sebelisoang ho matlafatsa sekontiri. Lithapo tsohle tsa motlakase tse hoketsoeng ho sepharallatsi li tlameha ho sebetsa ka har'a moaho. Likhokelo tsohle tsa motlakase li lokela ho etsoa ha motlakase o tima. Potoloho ea marang-rang e fanang ka sesebelisoa e tlameha ho ba le sesebelisoa sa ho kenya. Ka mor'a ho qeta ho kenya le ho qala, koala sekoti.
- Ho kenya ho ka etsoa feela ke motho ea tšoanelehang ea nang le litumello tse nepahetseng le tumello ea ho hokahanya le ho kenella ho 230VAC le low-vol.tage marang-rang. Ha e lumelloe ho sebelisa sebaka se kampetsoeng ntle le seketsoana sa ts'ireletso ea motlakase (PE) e kentsoeng hantle le e sebetsang ka botekgeniki.
Setšoantšo sa 2 MCX2D expander
Letlapa la 3. MCX2D screw terminals
| Letlapa la 3. MCX2D screw terminals | |
| Lebitso | Tlhaloso |
| BAT+, BAT- | Betri ea bekapo |
| VIN+, VIN- | Phepelo ea motlakase ea 13.8VDC |
| AUX+, AUX- | 13.8VDC/0.2A phepelo ea motlakase e tsoang (bakeng sa morero o akaretsang) |
| VOUT+, VOUT- | 13.8VDC/0.2A phepelo ea matla a tsoang (ho molaoli) |
| A, B | RS485 bese (ho ea ho molaoli) |
| Axe*, Bx | Bese ea RS485 (ho babali) |
| TMLx+, TMLx- | 13.8VDC/0.2A phepelo ea motlakase e tsoang (ho babali) |
| VDRx+, VDRx- | 13.8VDC/1.0A phepelo ea motlakase e tsoang (ho notlela monyako) |
| LCKx | 15VDC/1.0A transistor line line (notlolo ea mamati) |
| BELLx | 15VDC / 1.0A transistor line line (sesebelisoa sa pontšo ea alamo) |
| DCx | Mohala oa ho kenya (lemati) |
| DRx | Mola oa ho kenya (konopo ea ho tsoa) |
LIEKETSENG TŠEBELETSO
Boemong bo tloaelehileng ba ts'ebetso, li-expander tsa MCX2D li sebelisoa ho MC16-PAC-2-KIT lisebelisoa tsa taolo ea menyako e 'meli (sa feiga. 4 le 6). Boemong bo bong ba ts'ebetso, lisebelisoa tse ngata tsa MCX2D li hokahantsoe le taolo ea phihlello ea MC16 ea multidoor (sa feiga. 5). Boemong bo joalo palo e kholo ea lisebelisoa tse sebelisoang ke molaoli oa MC16 e ipapisitse le mofuta oa eona mme e lekantsoe ke mefuta e fumanehang ea liaterese ID=100-115 beseng ea RS485 ea molaoli oa MC16 moo lisebelisoa tsohle tsa MCX le MCT li tlamehang ho ba le liaterese tse ikhethileng. Bakeng sa mohlalaample, tabeng ea ho bala ho tsoa / ho tsoa mamati, ho ka khoneha ho laola max. 6 mamati a setang joalo ka MC16-PAC-6 + 3 x MCX2D + 12 x MC, T, ha tabeng ea ho bala mamati, ho ka khoneha ho laola max. mamati a 10 ho seta e joalo ka MC16-PAC-10 + 5 x MCX2D + 10 x MCT. Maemong ana ka bobeli, liaterese tse 15 beseng ea RS485 li lula. Hape hoa khoneha ho kopanya mamati a ho bala le ho bala / ho tsoa ka har'a molaoli a le mong oa MC16 haeba moeli o amanang le palo ea liaterese tsa RS485 o bolokiloe.
Setšoantšo sa 4 Scenario ea ts'ebetso le MC16-PAC-2-KITs
Setšoantšo sa 5 Scenario ea ts'ebetso e nang le lisebelisoa tse ngata tsa MCX2D
Setšoantšo sa 6 sa khokahano bakeng sa MCX2D expander ho MC16-PAC-2-KIT
TIISETSO
Sepheo sa tlhophiso ea boemo bo tlaase ke ho lokisetsa sesebelisoa bakeng sa ho sebetsa tsamaisong ea RACS 5. Mabakeng a sistimi ea RACS 5 v1, aterese ea sesebelisoa e tlameha ho hlophisoa ka software ea RogerVDM kapa ka aterese ea letsoho pele e hokeloa ho molaoli oa MC16. Ha u ntse u le tsamaisong ea RACS v2, tlhophiso ea boemo bo tlaase le aterese e ka etsoa ka VISO v2 software nakong ea tlhophiso ea ho qetela ea tsamaiso. Ka hona, tsamaisong ea RACS 5 v2, tlhophiso ea software ea khale ea VDM le aterese ea matsoho ke ea boikhethelo, 'me nakong ea installatio, ho hlokahala feela ho hokahanya sesebelisoa ho molaoli oa phihlello oa MC16.
Tlhophiso ea boemo bo tlase (VISO v2)
Lenaneong la RACS 5 v2, morekisi o ka kenngoa setšeng ntle le tlhophiso e fetileng. Ho latela lengolo la kopo la AN006, aterese ea eona le litlhophiso tse ling li ka lokisoa ho tsoa ho software ea tsamaiso ea VISO v2 a,, le nakong ea tlhophiso e joalo, phihlello ea mabitso a eona a ts'ebeletso (sa feiga. 2) ha e hlokehe.
Tlhophiso ea boemo bo tlase (RogerVDM)
Sepheo sa tlhophiso ea boemo bo tlaase ke ho lokisetsa sesebelisoa bakeng sa ho sebetsa tsamaisong ea RACS 5. Mokhoa oa ho hlophisa ka software ea RogerVDM (firmware 1.1.30.266 kapa e ncha):
- Kopanya sesebelisoa ho sebopeho sa RUD-1 (sa feiga. 7) 'me u kopanye RUD-1 ho koung ea USB ea k'homphieutha.
- Tlosa jumper ho tsoa ho mabitso a MEM (setšoantšo sa 2) haeba se behiloe moo.
- Qala sesebelisoa ka ho tobetsa konopo ea RST, 'me letšoao la RUN LED le tla phunya. Ebe, nakong ea metsotsoana e 5, beha jumper ho mabitso a MEM, 'me letšoao la RUN LED le tla phunya kapele.
- Qala lenaneo la RogerVDM, khetha sesebelisoa sa MCX v1.x, mofuta oa firmware oa v1.x, mocha oa puisano oa RS485, le sekepe sa serial se nang le RUD-1 interface.
- Tobetsa Connect, 'me lenaneo le tla theha khokahanyo le ho hlahisa tab ea Configuration ka bo eona.
- Therange ea 100-115 (haeba ho hlokahala) le litlhophiso tse ling ho latela litlhoko tsa ts'ebetso e khethehileng.
- Tobetsa Romela ho Sesebediswa ho ntlafatsa tlhophiso.
- Ka boikhethelo, etsa bekapo ka ho tobetsa Romela ho File… le ho boloka li-setting ho o file ka disk.
- Tlosa sehokelo sa RUD-1 'me u tlohele jumper ho mabitso a MEM ho nolofalletsa sesebelisoa ho tsoa ho software ea VISO v2, kapa tlosa jumper ho mabitso a fthe MEM ho thibela tlhophiso e joalo e hole.
Mokhoa oa ho hlophisa ka software ea RogerVDM (firmware ea khale ho feta 1.1.30.266):
- Kopanya sesebelisoa ho sebopeho sa RUD-1 (sa feiga. 7) 'me u kopanye RUD-1 ho koung ea USB ea k'homphieutha.
- Beha jumper ho mabitso a MEM (setšoantšo sa 2).
- Qala sesebelisoa ka ho tobetsa konopo ea RST, 'me letšoao la RUN LED le tla phunya.
- Qala lenaneo la RogerVDM, khetha sesebelisoa sa MCX v1.x, mofuta oa firmware oa v1.x, mocha oa puisano oa RS485, le sekepe sa serial se nang le RUD-1 interface.
- Tobetsa Connect, 'me lenaneo le tla theha khokahanyo le ho hlahisa tab ea Configuration ka bo eona.
- Kenya aterese ea RS485 e sa sebetseng sebakeng sa 100-115 (haeba ho hlokahala) le litlhophiso tse ling ho latela litlhoko tsa ts'ebetso e khethehileng.
- Tobetsa Romela ho Sesebediswa ho ntlafatsa tlhophiso.
- Ka boikhethelo, etsa bekapo ka ho tobetsa Romela ho File… le ho boloka li-setting ho a file ka disk.
- Tlosa jumper ho mabitso a MEM 'me u hakolle sesebelisoa ho sebopeho sa RUD-1.
Setšoantšo sa 7 Khokahano ho sebopeho sa RUD-1 (sebopeho sa boemo bo tlaase
Lethathamo la 4. Lethathamo la litekanyetso tse tlase)
| Lethathamo la 4. Lethathamo la li-parameter tsa boemo bo tlaase | |
| Litlhophiso tsa puisano | |
| RS485 aterese | Paramethara e hlalosa aterese ea sesebelisoa beseng ea RS485. Sebaka: 100-115. Boleng ba kamehla: 100. |
| Nako ea puisano ea RS485 [s] | Parameter e hlalosa tieho ka mor'a moo sesebelisoa se tla bontša puisano e lahlehileng le molaoli. Ha e setetsoe ho 0, joale pontšo ea tima. Sebaka: 0-64s. Boleng ba kamehla: 20s. |
| RS485 encryption | Paramethara e nolofalletsa ho ngolla beseng ea RS485. Range: [0]: Che, [1]: E. Boleng ba kamehla: [0]: Che. |
| Senotlolo sa encryption sa RS485 | Paramethara e hlalosa senotlolo sa ho ngolla puisano ka bese ea RS485. Range: 4-16 litlhaku tsa ASCII. |
| Mefuta ea ho kenya | |
| DC1, DR1, DC2, DR2 | Paramethara e hlalosa mofuta oa ho kenya. Range: [1]: NO, [2]: NC, [3]: EOL/NO, [4]: EOL/NC, [5]: 2EOL/NO, [6]: 2EOL/NC, [7]: 3EOL/NO, [8]:
3EOL/NC, [9]: 3EOL/DW/NO, [10]: 3EOL/DW/NC. Boleng ba kamehla ba DC ke [2]: NC. Boleng ba kamehla ba DR ke [1]: NO. |
| Ho hanyetsa ho kenya ha Parametric (EOL). | |
| Tamper, Alamo A, Alamo B [Ohm] | Paramethara e hlalosa mohanyetsi bakeng sa lisebelisoa tsa parametric (EOL). |
| Linako tsa karabo | |
| DC1, DR1, DC2, DR2 [ms] | Paramethara e hlalosa nako e fokolang ea pulse e hlokahalang ho kenya letsoho. Mefuta: 50-5000. Boleng ba kamehla: 50. |
| Polarity e hlahisoang | |
| LCK1, BELL1, LCK2, BELL2 | Paramethara e hlalosa polarity ea tlhahiso. Tlhōrō e tloaelehileng e bolela hore tlhahiso ka ho sa feleng ea tima, athe polarity e khutliselitsoeng e bolela hore tlhahiso ka ho sa feleng e butsoe. Range: [0]: Normal polarity, [1]: Reversed polarity. Boleng ba kamehla: [0]: Polarity e tloaelehileng. |
| Maikutlo | |
| DEV, PWR | Paramethara e hlalosa mongolo kapa maikutlo a lumellanang le sesebelisoa / ntho. Hamorao e bontšoa lenaneong la VISO. |
| Kenya maikutlo | |
| DC1, DR1, DC2, DR2 | Paramethara e hlalosa mongolo kapa taelo efe kapa efe e tsamaellanang le ntho. Hamorao e bontšoa lenaneong la VISO. |
| Litlhaloso tsa tlhahiso | |
| LCK1, BELL1, LCK2, BELL2 | Paramethara e hlalosa mongolo kapa tlhaloso efe kapa efe e tsamaellanang le ntho. Hamorao e bonts'oa lenaneo la ISO. |
Ho seta memori hape le ho fana ka aterese ka letsoho
Ts'ebetso ea ho khutlisetsa memori e seta li-setting tsohle hore e be tsa kamehla tsa feme, 'me e nolofalletsa ho hlophisa aterese ka letsoho beseng ea RS485. Ho tsosolosa memori le mokhoa oa ho sebetsana le aterese (firmware 1.1.30.266 kapa e ncha):
- Tlosa likhokahano tsohle meleng ea LCK1 le DC1.
- Tlosa jumper ho tsoa ho mabitso a MEM (setšoantšo sa 2) haeba se behiloe moo.
- Hokela LCK1 le DC1 mela.
- Qala sesebelisoa ka ho tobetsa konopo ea RST, 'me letšoao la RUN LED le tla phunya. Ebe, nakong ea metsotsoana ea 5, beha jumper ho mabitso a MEM, 'me letšoao la ACL LED le tla phunya.
- Hakolla likhoele tsa LCK1 le DC1, 'me letšoao la RUN LED le tla phunya butle. Palo ea likhase tse latellanang li tla tsamaellana le aterese ea morekisi ka beseng ea RS485.
- Tobetsa konopo ea RST ka nako e itseng ho hlalosa aterese e itseng (tafole 1) kapa tobetsa konopo ea RST ka mor'a ho benya ha 16 ha matšoao a ACL le RUN LED a khantšoa ho hlalosa ID ea kamehla = 100 aterese.
- Hakolla sehokelong sa RUD-1 'me u tlohele jumper ho likhokahanyo tsa MEM ho thusa ho etsa tlhophiso e eketsehileng ea sesebelisoa ho software ea VISO v2, kapa tlosa jumper ho mabitso a MtheM ho thibela tlhophiso e joalo ea hole.
Ho tsosolosa mohopolo le mokhoa oa ho sebetsana le litaelo (firmware ea khale ho feta 1.1.30.266):
- Tlosa likhokahano tsohle meleng ea LCK1 le DC1.
- Beha jumper ho mabitso a MEM (setšoantšo sa 2).
- Hokela LCK1 le DC1 mela.
- Qala sesebelisoa ka ho tobetsa konopo ea RST, 'me letšoao la ACL LED le tla phunya.
- Hakolla likhoele tsa LCK1 le DC1, 'me letšoao la RUN LED le tla phunya. Palo ea likhase tse latellanang li tla tsamaellana le aterese ea morekisi ka beseng ea RS485.
- Tobetsa konopo ea RST ka nako e itseng ho hlalosa aterese e itseng (tafole ea 5) kapa tobetsa konopo ea RST ka mor'a ho benya ha 16 ha matšoao a ACL le RUN LED a buletsoe ho hlalosa aterese ea kamehla ea ID=100.
- Tlosa jumper ho mabitso a MEM ebe o qala sesebelisoa hape.
Letlapa la 5. Khouto ea aterese ea RS485
| Letlapa la 5. Khouto ea aterese ea RS485 | |||
| Palo ea mabone a RUN LED | RS485 aterese | Palo ea mabone a RUN LED | RS485 aterese |
| 1 | 101 | 9 | 109 |
| 2 | 102 | 10 | 110 |
| 3 | 103 | 11 | 111 |
| 4 | 104 | 12 | 112 |
| 5 | 105 | 13 | 113 |
| 6 | 106 | 14 | 114 |
| 7 | 107 | 15 | 115 |
| 8 | 108 | 16 | 100 |
ExampLe:
Ho khetha ID=105 aterese ka har'a mokhoa oa ho seta memori, tobetsa konopo ea RST ka mor'a ho benya ha 5 ha letšoao la UN LED.
Tlhophiso ea boemo bo holimo (VISO)
Sepheo sa tlhophiso ea boemo bo holimo ke ho hlalosa ts'ebetso e utloahalang ea seantšisi, se buisanang le taolo ea phihlello ea MC16, 'me e ipapisitse le boemo bo sebelisitsoeng ba ts'ebetso. Examptlhophiso ea sistimi ea taolo ea phihlello e fanoe ho lengolo la kopo la AN006, le fumanehang ho www.roger.pl.
LIEKETSENG FIRMWARE
Firmware ea sesebelisoa e ka fetoleloa ho mofuta o mocha kapa oa khale. Ntlafatso e hloka khokahano ho komporo e nang le sebopeho sa RUD-1 (setšoantšo sa 2) le ho qala software ea RogerVDM. Firmware ea morao-rao file e fumaneha ho www.roger.pl.
Mokhoa oa ho ntlafatsa firmware:
- Kopanya sesebelisoa ho sebopeho sa RUD-1 (sa feiga. 8) 'me u kopanye RUD-1 ho koung ea USB ea k'homphieutha.
- Beha jumper ho mabitso a FDM (sa feiga. 2).
- Qala sesebelisoa hape ka ho tobetsa konopo ea ST, 'me letšoao la TXD LED le tla bulela.
- Qala lenaneo la RogerVDM 'me ho menu e ka holimo khetha Lisebelisoa ebe u Nchafatsa firmware.
- Ka fensetere e butsoeng, khetha mofuta oa sesebelisoa, koung ea serial e nang le RUinterfaceace, le tsela ea firmware file (*.hex).
- Tobetsa Update ho qala ho kenya firmware ka sebaka sa tsoelo-pele ka tlase.
- Ha ntlafatso e felile, tlosa jumper ea FDM ebe o qala sesebelisoa hape. Ho phaella moo, ho kgothaletswa ho qala ts'ebetso ea ho tsosolosa memori.
Setšoantšo sa 8 Khokahano ho RUD-1 interface (apdeite ea firmware)
TAELO TSEBISO
Letlapa la 7. Ho laela tlhahisoleseding
| Letlapa la 7. Ho laela tlhahisoleseding | |
| MCX2D | MCX2D expander electronic module for installer in a metal housing with a |
| phepelo ea motlakase | |
| MC16-PAC-2-KIT | 2-monyako oa ho kena taolong kit; ME-15 sekoahelo sa tšepe; Mojule oa taolo ea phihlello ea MC16-PAC-2; MCX2D I/O expander; Phepelo ea motlakase ea PS2D |
| RUD-1 | Khokahano ea puisano ea USB-RS485 e inehetseng ho lisebelisoa tsa taolo ea phihlello ea ROGER |
SEHLAHISO HISTORI
| Letlapa la 8. Histori ea lihlahisoa | ||
| Phetolelo | Letsatsi | Tlhaloso |
| MCX2D v1.0 | 10/2017 | Phetolelo ea pele ea khoebo ea oduct |
Letšoao lena, le behiloeng holim'a sehlahisoa kapa sephutheloana, le bontša hore sehlahisoa ha sea lokela ho lahloa le litšila tse ling, kaha sena se ka senya tikoloho le bophelo bo botle. Mosebelisi o tlamehile ho isa lisebelisoa libakeng tse khethiloeng tsa pokello ea litšila tsa motlakase le tsa elektroniki. Bakeng sa lintlha tse felletseng mabapi le ho sebelisa hape, ikopanye le ba boholong sebakeng sa heno, k'hamphani ea ho lahlela lithōle, kapa moo u rekang teng. Pokello e arohaneng le ho sebelisoa bocha ha mofuta ona oa litšila ho kenya letsoho ts'ireletsong ea lisebelisoa tsa tlhaho 'me ho bolokehile bophelo bo botle le tikoloho. Boima ba thepa bo hlalositsoe tokomaneng.
Ikopanye le:
- Roger sp. z o Sp.k. 82-400 Sztum Gościszewo 59
- Mohala: +48 55 272 0132
- Fax: +48 55 272 0133
- Theknoloji. tšehetso: +48 55 267 0126
- E-mail: support@roger.pl
- Web: www.roger.pl
FAQs
Nka seta memori botjha jwang tsamaisong ya MCX2D?
Ho seta memori botjha, latela ditaelo tse bukeng ya mosebedisi e fanoeng ke moetsi. Ka tloaelo, reset ea memori e kenyelletsa mehato e itseng ea ho hlakola le ho lokisa litlhophiso tsa sistimi.
Bohlokoa ba matšoao a LED ka mokhoa oa ts'ebeletso ke bofe?
Lits'oants'o tsa LED maemong a ts'ebeletso li supa maemo a fapaneng joalo ka liphoso tsa puisano, liphoso tsa memori ea tlhophiso, le ts'ebetso e tloaelehileng. Sheba buka ea mosebelisi bakeng sa tlhaiso-leseling e batsi mabapi le ho toloka mats'oao a LED
Litokomane / Lisebelisoa
 |
Sistimi ea Taolo ea phihlello ea Roger MCX2D [pdf] Buka ea Taelo MCX2D, MCX2D Access Control System, MCX2D, Access Control System, Control System, Sistimi |