Litaba
pata
Lisebelisoa tsa PCE PCE-EMF 30 Electromagnetic Field Meter
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Yuniti: V/m
- Qeto: 1 V/m
- Lekhalo la Tekanyo:
- RF: 1 MHz ho 10 GHz
- EF: 5 Hz ho isa ho 3500 MHz
- Bophahamo ba motlakase: Ha ea hlalosoa
- Sebaka sa ho lekanya: Molemo ka ho fetisisa ka hare ho 0 ho 60 cm ho tloha ntho e lekantsoeng
- Ho lekanya Nako: 0.7 metsotsoana
- Thempereichara ea ho sebetsa: Ha ea hlalosoa
- Mongobo o sebetsang: Ha ea hlalosoa
- Tshebetso Voltage: Ha ea hlalosoa
- Litekanyo (L x W x H): Ha ea hlalosoa
- Boima ba 'mele: Ha ea hlalosoa
Litaelo tsa Tšebeliso ea Sehlahisoa
- Ka kopo bala bukana ka hloko pele u sebelisa sesebelisoa.
- E sebelisoa feela ke basebetsi ba nang le litsebo 'me e lokisoe ke basebetsi ba PCE Instruments ha ho hlokahala.
- Qoba tšenyo kapa likotsi ka ho latela bukana.
- E kenyelletsa mitha ea tšimo ea motlakase e le 'ngoe PCE-EMF 30 le bukana e le 'ngoe ea mosebelisi.
- Sheba lintlha tse ka holimo bakeng sa data ea tekheniki.
- Netefatsa hore sesebelisoa se ka har'a sebaka se khothalletsoang sa ho metha ho tloha ho 0 ho isa ho 60 cm ho tloha nthong e lekantsoeng.
- Tobetsa likonopo tse loketseng ho qala mokhoa oa ho lekanya.
- Haeba sesebelisoa se lemoha hore se tletse, latela litaelo tse bukeng ea litaelo ho rarolla bothata.
- Sheba le ho khutlisa betri ha ho hlokahala ho latela litataiso tse bukeng ea tataiso.
- Haeba u na le lipotso kapa u hloka thuso, ikopanye le PCE Instruments bakeng sa tšehetso.
- Latela mekhoa e nepahetseng ea ho lahla joalokaha e hlalositsoe bukeng ea litaelo ha u lahla sesebelisoa.
LBH
- Q: Nka lekanya mitha ea tšimo ea electromagnetic joang?
- A: Litaelo tsa ho lekanya li ka fumanoa bukeng ea mosebelisi. Latela tataiso ea mohato ka mohato e fanoeng.
- Q: A na nka sebelisa sesebelisoa maemong a mocheso o feteletseng?
- A: Mefuta ea mocheso oa ho sebetsa e fanoa karolong ea data ea theknoloji. Qoba ho sebelisa sesebediswa ka ntle ho mefuta ena.
Lintlha tsa Polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Le ka mohla u se ke ua sebelisa lintho tse motsu ho tobetsa linotlolo.
- Boloka mitha sebakeng se phodileng, se omileng. Ha ho na vibration e lokelang ho etsahala sebakeng sa polokelo.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.
Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena.
Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a kakaretso a khoebo.
Likahare tsa Phano
- 1 x mitha ea tšimo ea motlakase PCE-EMF 30
- 1 x buka ea mosebelisi
Lintlha tsa Tekheniki
| RF | EF | MF | |
| Yuniti | mW/m² | V/m | mG/µT |
| Qeto | 0.01 mW/m² | 1 V/m | 0.1 mG / 0.01 µT |
| Lekhalo la litekanyo | 0.01 … 1800 mW/m² | 1 … 1999 V/ m | 0.1 … 999.9 mG
0.01 … 99.99 µT |
| Bophahamo ba motlakase | 1 MHz … 10 GHz | 5 Hz … 3500 MHz | |
| Ho lekanya sebaka | Sebaka se setle ka ho fetisisa sa ho lekanya se ka hare ho 0 ... 60 cm ho tloha nthong e lekantsoeng. U ka boela ua lekanya ho feta moeli ona empa
kheloha e ka hlaha. |
||
| Ho lekanya nako | 0.7 s | ||
| Mocheso oa ho sebetsa | 0 … 50 °C | ||
| Mongobo o sebetsang | <80% RH | ||
| Tshebetso voltage | 3.7 V | ||
| Litekanyo (L x W x H) | 147 x 69 x 31 | ||
| Boima ba 'mele | 147 g | ||
Tlhaloso
- PCE-EMF 30 e lekanya masimo a motlakase (EF), matla a khoheli (MF), le masimo a maqhubu a seea-le-moea (RF). Boemo ba kamehla ke mokhoa oa EF ha sesebelisoa se bulela 'me lipalo li bontšoa ho LCD.
- Sesebelisoa se na le sensara ea mahlaseli a motlakase e hahelletsoeng kahare mme e bonts'a boleng ba radiation skrineng sa LCD.
- U ka nka mehato e sebetsang ea thibelo khahlanong le mahlaseli a motlakase ho latela sephetho sa liteko.
Tlhaloso ea sesebelisoa
- A = Sebaka sa ho lemoha sa EF / MF B = LC ponts'o
- C = Senotlolo sa UNIT
- D = Karolelano/ Senotlolo sa tlhoro
- E = Bulela/tima / TSHWARA senotlolo
- F = Senotlolo sa GRAPH
- G = Senotlolo sa SOUND
- H = Senotlolo sa MODE (EF / MF / RF) I = Sokete ea ho tjhaja
- J = Sebaka sa ho lemoha RF
Hlahisa tlhaloso
- a = Pontšo ea ho tima
- b = Pontšo ea molumo
- c = Pontšo ea Paramethara
- d = Pontsho ya boleng bo mahareng/boholo e = Tekolo
- f = Ts'ebetso ea data
- g = Tataiso ea lipontšo
- h = Ho bala
- i = Yuniti
- j = Boleng bo phahameng
Tshebetso
Ho bulela mithara/ho tima
- Tobetsa konopo ea HOLD ho bulela mithara. Tobetsa o hatelle konopo ho tima mithara.
- Ka mor'a hore motlakase o bulele, motlakase o tima o tla buloa ka mokhoa oa kamehla le ho
letšoao le tla hlahisoa. Ntle le ts'ebetso efe kapa efe nakong ea metsotso e 15, mitha e tla koala ka bo eona. Tobetsa o hatelle konopo ea MODE ho koala tšebetso.
Hlokomela
Ka lebaka la tšitiso e ka bang teng ea tšimo ea motlakase tikolohong, mitha e ka bonts'a boleng bo bonyenyane kamora ho sebetsa. Sena ha se bolele hore sesebelisoa ha se na phoso.
Backlight le tlhophiso ea mebala
- Tobetsa 'me u tšoare konopo ea MG/UT (UNIT) ho fetola khanya ea lebone le ka morao pakeng tsa khanya e sa feleng le khanya e phahameng (ea kamehla: khanya e sa feleng).
- Tobetsa 'me u tšoare konopo ea GRAPH ho fetola pakeng tsa ponahalo e tšoeu le e ntšo.
Mokhoa oa ho lekanya
Bakeng sa tekanyo e tloaelehileng ea EF ka mor'a hore motlakase o khannoe, tšoara sesebelisoa se nang le karolo e ka pele ea kutlo butle se atamela mohloling oa mahlaseli a motlakase ho lekoa. Boleng bo lekantsoeng bo bontšoa haeba boleng ba mahlaseli bo le ka har'a mefuta e boletsoeng.
Tobetsa konopo ea MODE hakhuts'oane ho fetola lipakeng tsa mekhoa ea ho lekanya EF/MF/RF.
Lintlha
- Se ke oa koahela li-sensor tse kaholimo ho mithara ka letsoho la hau kapa lintho tse ling.
- Lekanya ho tloha bohole bo sireletsehileng ha lits'ebeletso tsa khatello e phahameng li ameha!
Boemo ba karolelano/boholo / bo phahameng
- Tobetsa ka bokhutšoane senotlolo sa karolelano/tlhōrō ho fetola pakeng tsa boleng ba karolelano le boholo. Boleng ba tlhoro bo bonts'itsoe ka tlase.
- AVG: karolelano ea litekanyo tse 40 ho asampmaqhubu a mang a ka bang 1000 Hz
- MAX: boholo ba boleng bo lekantsoeng ka mor'a hore motlakase o butsoe
- Peak: boleng bo lekantsoeng ba tlhoro nakong ea metsotsoana e 3
Ho fetola yuniti
Tobetsa konopo ea MG/UT hakhutšoanyane (UNIT) ho fetola yuniti ea matla a khoheli lipakeng tsa µT le mG.
Grafiken view
- Tobetsa konopo ea GRAPH hakhuts'oane ho fetola lipakeng tsa tekanyo le kerafo view.
- Tekanyo view e bonts'a boleng bo lekantsoeng le boleng ba tlhoro le kerafo view e bonts'a boleng bo lekantsoeng ba hajoale le litekanyetso tse 30 tse lekantsoeng nakong e fetileng ho graph ea bar e nchafalitsoeng ka nako ea nnete.
Tšoara data
- Tobetsa konopo ea HOLD ho tšoara/ho homisa data. Letšoao la HOLD le tla hlahisoa skrineng.
- Tobetsa konopo hape ho tsoa ho HOLD mode.
Litlhophiso tsa Zero (litekanyo tsa EF-le MF feela)
Tobetsa o tšoare konopo ea SOUND. Letšoao la "Zero Cal" le tla hlahisoa. Ka nako e ts'oanang, tobetsa konopo ea HOLD ho qeta litlhophiso tsa zero. "Zero Done" joale e tla hlahisoa.
Lintlha
- Sebaka sa motlakase sebakeng sa zero se lekanyelitsoe ho litekanyetso tsa tekanyo tse ka tlase ho 10 V / m.
- Sebaka sa makenete sa zero se lekanyelitsoe ho litekanyetso tsa 0.1 µT kapa ka tlase.
Boitsebiso bo Felletseng
- Ha boleng bo lekantsoeng bo feta tekanyo e phahameng, "OL" e tla hlahisoa, bona ka tlase.
Pontšo ea alamo
| Tlhahlobo ea boleng ba mahlaseli | E ntle | Hanyane | E matla | Feteletseng |
| RF (mW/m') | 0 …1 | 1 … 5 | 5 … 20 | 20 … 1800 |
| EF (V/m) | 0 … 40 | 40 … 75 | 75 … 100 | 100 … 1999 |
| MF (mG) | 0 … 4 | 4 … 10 | 10 … 50 | 50 … 999.9 |
| Mmala wa ho bala | Botsho/bosweu | Botsho/bosweu | Khubedu | Khubedu |
| Kenya mebala kerafong ea bar | Botala | Boputsoa | namunu | Khubedu |
Molumo oa alamo
- Molumo o tingoa ka mokhoa oa kamehla ha meter e buletsoe. Tobetsa konopo ea SOUND hakhutšoanyane ho bulela/ tima molumo. Ha o bulela molumo, the
letšoao le tla hlahisoa. - Ha tekanyo e lekantsoeng e fihla boemong ba "bonyane", meter e tla fana ka alamo. Matla a molumo a fetoha ho latela boleng bo lekantsoeng.
Betri
- Ha betri e tjhajoang e ntse e bata, e tjhaje ka nako.
- Letšoao la ho tjhaja le hlahisa 100 % ha betri e tjhajilwe ka botlalo.
Ikopanye
- Haeba u na le lipotso, litlhahiso, kapa mathata a tekheniki, ka kopo u se ke oa tsilatsila ho ikopanya le rona.
- U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
- Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe.
- Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia lokela ho lahloa e le litšila tsa ka tlung.
- Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
- E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e sebelisang lintho tse sebelisoang hape e lahlang lisebelisoa ho latela molao.
- Bakeng sa linaha tse kantle ho EU, libeteri, le lisebelisoa li tlameha ho lahloa ho latela melaoana ea lehae ea hau ea litšila.
- Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
| Jeremane | Fora | Spain |
| PCE Deutschland GmbH | PCE Instruments France EURL | PCE Ibérica SL |
| Ke Langel 26 | 23, Rue de Strasbourg | Calle Mula, 8 |
| D-59872 Mechede | 67250 Soultz-Sous-Forets | 02500 Tobarra (Albacete) |
| Deutschland | Fora | Sespaña |
| Mohala: +49 (0) 2903 976 99 0 | Mohala: +33 (0) 972 3537 17 | Mohala : +34 967 543 548 |
| Fekse: +49 (0) 2903 976 99 29 | Nomoro ea fax: +33 (0) 972 3537 18 | Fax: +34 967 543 542 |
| info@pce-instruments.com | info@pce-france.fr | info@pce-iberica.es |
| www.pce-instruments.com/deutsch | www.pce-instruments.com/french | www.pce-instruments.com/espanol |
| united kingdom | Italy | kalakuni |
| PCE Instruments UK Ltd | PCE Italia srl | PCE Teknik Cihazları Ltd.Şti. |
| Ntlo ea Trafford | Ka Pesciatina 878 / B-Interno 6 | Halkalı Merkez Mah. |
| Chester Rd, Old Trafford | Sebaka sa 55010 Gragnano | Pehlivan Sok. No.6/C |
| Manchester M32 0RS | Kapannori (Lucca) | 34303 Küçükçekmece – İstanbul |
| united kingdom | Italy | Türkiye |
| Mohala: +44 (0) 161 464902 0 | Thelefono: +39 0583 975 114 | Mohala: 0212 471 11 47 |
| Fax: +44 (0) 161 464902 9 | Fax: +39 0583 974 824 | Fekese: 0212 705 53 93 |
| info@pce-instruments.co.uk | info@pce-italia.it | info@pce-cihazlari.com.tr |
| www.pce-instruments.com/english | www.pce-instruments.com/italiano | www.pce-instruments.com/turkish |
| Netherlands | Amerika | Denmark |
| PCE Brookhuis BV | Litlhaloso tsa likarolo tsa PCE Americas Inc. | PCE Lisebelisoa Denmark ApS |
| Institutenweg 15 | 1201 Jupiter Park Drive, Suite 8 | Birk Centerpark 40 |
| Tlhaloso: 7521 PH | Jupiter / Palm Beach | 7400 Herning |
| Nederland | 33458 leq | Denmark |
| Phone: + 31 (0) 53 737 01 92 | usa | Mohala: +45 70 30 53 08 |
| info@pcebenelux.nl | Mohala: +1 561-320-9162 | kontakt@pce-instruments.com |
| www.pce-instruments.com/dutch | Fax: +1 561-320-9176 | www.pce-instruments.com/dansk |
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-EMF 30 Electromagnetic Field Meter [pdf] Bukana ea Mosebelisi PCE-EMF 30 Electromagnetic Field Meter, PCE-EMF 30, Electromagnetic Field Meter, Field Meter, Meter |