Letoto la EDS-4008
Tataiso ea ho Kenya ka Potlako
Moxa EtherDevice™ Switjha
Phetolelo ea 1.1 Pulungoana 2022
Information Support Contact Information
www.moxa.com/support

Lethathamo la Pakete

EDS-4008 Series indasteri ea DIN-rail EtherDevice Switch (EDS) e romelloa ka lintho tse latelang. Haeba e 'ngoe ea lintho tsena e le sieo kapa e senyehile, ka kopo ikopanye le moemeli oa litšebeletso tsa bareki bakeng sa thuso.

• 1 EDS-4008 Ethernet switch
• Tataiso ea ho kenya kapele (e hatisitsoe)
• Karete ea tiisetso
• Tafole ea phatlalatso ea lithethefatsi
• Setifikeiti sa sehlahisoa sa tlhahlobo ea boleng (Sechaena se Nolofalitsoeng)
• Litsebiso tsa sehlahisoa (Sechaena se Nolofalitsoeng)

HLOKOMELA U ka fumana tlhaiso-leseling le khoarollo ea software maqepheng a amehang a sehlahisoa a fumanehang ho Moxa's websebaka: www.moxaok.net

Litlhophiso tsa kamehla

• Aterese ea IP: 192.168.127.253
• Subnet Mask: 255.255.255.0
• Username: admin
• Password: moxa

Phanele Views ea Letoto la EDS-4008 

1. 100BaseT(X) Letšoao la LED
2. 10BaseT(X) Letšoao la LED
3. 10/100BaseT(X) boema-kepe, Boema-kepe ba 1 ho isa ho 8
4. Sekoti sa sehokelo sa fatše
5. Li-terminal blocks bakeng sa ho kenya motlakase, ho kenya dijithale, le tlhahiso ea relay
6. Lipontšo tsa LED: STATE (S), FAULT (F), PWR1 (P1), PWR2 (P2), MSTR/HEAD (M/H), CPLR/TAIL (C/T), SYNC
7. Console port (RJ45, RS-232)
8. Boema-kepe ba polokelo ea USB (mofuta oa A, o koetsoeng hajoale)
9. Lebitso la mohlala

1. 100BaseT (X) Letšoao la LED 2. 10BaseT (X) Letšoao la LED 3. Likou tsa 10/100BaseT(X), tse 3 ho isa ho tse 8 4. Boema-kepe ba 100BaseFX (mofuta oa SC/ST), boema-kepe ba 1 le ba 2 5. Letšoao la LED la 100BaseFX 6. Sekoti se kopanyang fatše

7. Li-terminal blocks bakeng sa ho kenya matla, ho kenya digital, le tlhahiso ea relay 8. Lipontšo tsa LED: STATE (S), FAULT (F), PWR1 (P1), PWR2 (P2), MSTR/HLOOHO (M/H), CPLR/TAIL (C/T), SYNC 9. Kou ea Console (RJ45, RS-232) 10. Boema-kepe ba polokelo ea USB (mofuta oa A, o koetsoeng hajoale) 11. Lebitso la mohlala

1. 100BaseT (X) Letšoao la LED 2. 10BaseT (X) Letšoao la LED 3. Boema-kepe ba 10/100BaseT(X), boema-kepe ba 1 ho isa ho 4 4. 10/100/1000BaseT(X) boema-kepe, boema-kepe ba G3 ho isa G4 5. 1000BaseT(X) LED indicator 6. 10/100BaseT (X) Letšoao la LED 7. Likou tsa 100 / 1000BaseSFP, boema-kepe ba G1 ho ea ho G2

8. Letšoao la LED la 100/1000BaseSFP 9. Sekoti se kopanyang fatše 10. Li-terminal blocks bakeng sa ho kenya matla, ho kenya digital, le tlhahiso ea relay 11. Lipontšo tsa LED: STATE (S), FAULT (F), PWR1 (P1), PWR2 (P2), MSTR / HEAD (M / H), CPLR / TAIL (C / T), SYNC 12. Kou ea Console (RJ45, RS-232) 13. Boema-kepe ba polokelo ea USB (mofuta oa A, o koetsoeng hajoale) 14. Lebitso la mohlala 15. SmartPoE LED pontšo ea likoung tsa PoE

Phanele e ka tlase View

1. sekotjana sa karete ea microSD (hajoale se holofetse)
2. Seta botjha konopo
3. Li-switches tsa DIP bakeng sa Turbo Ring, Ring Master, le Ring Coupler

Mounting Dimensions

EDS-4008(-T)/EDS-4008-2MSC(-T)/EDS-4008-2SSC(-T) Models
Yuniti: mm(inch)

Mehlala ea EDS-4008-2MST(-T).

DIN-rail Mounting
Thepa ea DIN-rail mounting kit e ts'oaretsoe karolong e ka morao ea sesebelisoa sa EDS ha u e ntša ka lebokoseng. Hloma sesebelisoa sa EDS holim'a liporo tse holang tse sa corrosionfree tse kopanang
tekanyetso ea EN 60715.

Ho kenya
MOHATO 1-Kenya molomo o ka holimo oa seporo sa DIN ka har'a khiti e ntseng e hola ea DIN-rail.
MOHATO 2- Tobetsa sesebelisoa sa EDS ho leba seporong sa DIN ho fihlela se kena sebakeng.

Ho tloswa
MOHATO 1-Hula sekoti holim'a khiti e ntseng e phahama ka screwdriver.
MOHATO 2 & 3-Hula sesebelisoa sa EDS pele hanyane 'me u phahamisetse ho se tlosa seporong sa DIN.

HLOKOMELA Setsi sa rona sa terene sa DIN hona joale se sebelisa mokhoa oa ho lokolla kapele ho nolofalletsa basebelisi ho tlosa seporo sa DIN ho sesebelisoa sa EDS.

Ho Beha Lebota (Ha ho boikhethelo)
Bakeng sa lits'ebetso tse ling, u tla fumana ho le bonolo ho beha sesebelisoa sa Moxa EDS leboteng, joalo ka ha ho bonts'itsoe lipapisong tse latelang:
MOHATO 1-Tlosa poleiti e khomaretsoeng ea DIN-rail karolong e ka morao ea sesebelisoa sa EDS, ebe u hokela lipoleiti tsa lebota ka li-screws tsa M3.

MOHATO 2—Ho hloma sesebediswa sa EDS leboteng ho hloka dikurufu tse nne. Sebelisa sesebelisoa sa EDS, se kentsoeng lipoleiti tsa lebota. Lihlooho tsa li-screws li lokela ho ba ka tlase ho 6.0 mm ka bophara, 'me li-shaft li lokela ho ba ka tlase ho 3.5 mm ka bophara, joalokaha ho bontšitsoe setšoantšong se ka ho le letona.

HLOKOMELA Pele o tiisa li-screw leboteng, etsa bonnete ba hore hlooho ea sekoti le boholo ba shank li loketse ka ho kenya sekoti ho e 'ngoe ea li-apertures tse bōpehileng joaloka lesoba la Lebota.
HLOKOMELA Se ke oa phurula li-screw ka hohle-hohle-tlohela limilimithara tse ka bang 2 ho lumella sebaka sa ho thellela lerako la lebota pakeng tsa lebota le likurufu.
MOHATO 3-Ha li-screws li se li tsitsitse leboteng, kenya li-screw heads tse 'nè ka har'a likarolo tse pharaletseng tsa li-apertures tsa keyhole, ebe u thellela sesebelisoa sa EDS tlase, joalokaha ho bontšitsoe setšoantšong se ka ho le letona. Tiisa li-screws tse 'nè bakeng sa botsitso bo eketsehileng.

Litlhoko tsa Wiring

TLHOKOMELO
Tšireletseho Pele!
Likarolo tsa tšepe tse kantle li chesa. Nka mehato e hlokahalang ea ho itšireletsa haeba ho hlokahala hore u sebetsane le sesebelisoa.
TLHOKOMELO
E le ho netefatsa ts'ebetso e ts'epahalang, ka kopo etsa bonnete ba hore mocheso oa ts'ebetso oa tikoloho ha o fete litekanyo. Ha o kenya sesebelisoa sa EDS se nang le likarolo tse ling tsa ts'ebetso ka har'a khabinete ntle le moea o qobelloang, bonyane sebaka sa 4 cm ka lehlakoreng le letšehali le le letona la switch se khothaletsoa.
TLHOKOMELO
Tšireletseho Pele!
Netefatsa hore o hakolla thapo ea motlakase pele o kenya le/kapa o hokela sesebediswa sa hao sa EDS. Bala boholo bo ka khonehang terateng e 'ngoe le e 'ngoe ea motlakase le terata e tloaelehileng. Ela hloko likhoutu tsohle tsa motlakase tse laelang boholo ba hajoale bo lumelletsoeng bakeng sa saese ka 'ngoe ea terata. Haeba hona joale ho feta litekanyetso tse phahameng, wiring e ka chesa haholo, ea baka tšenyo e kholo ho thepa ea hau.

Etsa bonnete ba hore u bala le ho latela lintlha tsena tsa bohlokoa ka tlase:

• Sebelisa litsela tse arohaneng ho tsamaisa lithapo bakeng sa motlakase le lisebelisoa. Haeba lithapo tsa motlakase le litsela tsa lisebelisoa li tlameha ho tšela, etsa bonnete ba hore lithapo li perpendicular sebakeng sa mateano.

HLOKOMELA Se ke oa kenya mehala ea mats'oao kapa likhokahano le likhoele tsa motlakase ka kotopo e tšoanang ea terata. Ho qoba tšitiso, lithapo tse nang le litšobotsi tse fapaneng tsa matšoao li lokela ho tsamaisoa ka thoko.

• U ka sebelisa mofuta oa lets'oao le fetisoang ka mohala ho fumana hore na ke lithapo life tse lokelang ho aroloa. Molao oa monoana ke hore likhoele tse nang le litšobotsi tse tšoanang tsa motlakase li ka kopanngoa hammoho.
• O lokela ho arola wiring e kenang ho tsoa ho wiring e tsoang.
• Re u eletsa hore u behe lithapo ho lisebelisoa tsohle tsa sistimi ea hau.

Ho theha Letoto la Moxa EDS

Ho beha fatše le ho tsamaisa terata ho thusa ho fokotsa litlamorao tsa lerata ka lebaka la tšitiso ea motlakase (EMI). Matha khokahanyo ea fatše ho tloha holim'a sekoti sa fatše (M4) ho ea sebakeng se fatše pele u kopanya lisebelisoa.
HLOKOMELA Mohala oa fatše o lokela ho ba bonyane bophara ba 1.5 mm².
TLHOKOMELO
Sehlahisoa sena se reretsoe ho behoa sebakeng se hloekisitsoeng hantle se kang setsi sa tšepe.
Keletso ea Mofuta oa Mohala bakeng sa Khokahano ea Wiring Relay Contact (RELAY), Digital Input (DI), le Power Inputs (P1/P2)
Sesebelisoa sa EDS se kenyelletsa li-terminals tse peli tsa 4-pins 3.5 mm pin-pitch. Ha o kenya mohala oa relay (RELAY), digital input (DI), le lisebelisoa tsa matla (P1 / P2), re fana ka tlhahiso ea ho sebelisa mofuta oa cable - AWG 18-24 le li-terminals tsa mofuta oa pini tse lumellanang.
HLOKOMELA Mohala o tlameha ho mamella bonyane 105 ° C mme boleng ba torque e lokela ho ba 4.5 lb-in (0.51 Nm).
HLOKOMELA Re fana ka maikutlo a hore bolelele ba terminal ea mofuta oa pini ke 8 mm. E le ho tiisa terata ka nepo, ① sebelisa screwdriver e nyane ea flathead ho tobetsa konopo ea ho kena ka thoko ho terminal e 'ngoe le e 'ngoe ea sehokelo sa "terminal block" pele le nakong ② ho kenya terata. ③ Lokolla screwdriver ka mor'a hore terata e kenngoe ka botlalo. Ka kopo sheba setšoantšo se ka tlase.
Ho thaepa Lebitso la Relay
Sesebelisoa sa EDS se na le sete e le 'ngoe ea tlhahiso ea relay. Lebitso lena la relay le sebelisa likhokahano tse peli tsa "terminal block" mojuleng oa matla oa EDS. Sheba karolo bakeng sa litaelo tse qaqileng tsa mokhoa oa ho hokela lithapo ho sehokelo sa li-terminal block, le mokhoa oa ho hokela sehokelo sa terminal block receptor.

Lesokoana:
Likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin li sebelisetsoa ho bona liketsahalo tse hlophisitsoeng ke basebelisi. Lithapo tse peli tse khomaretsoeng ho li-contacts tsa phoso li theha potoloho e bulehileng ha ketsahalo e entsoeng ke mosebedisi e hlahisoa kapa ho se na matla a ho fetola. Haeba ketsahalo e hlophisitsoeng ea mosebelisi e sa etsahale, potoloho ea phoso e lula e koetsoe.

Ho Kenya Mehala ea Matla a sa Hlokehang

Sesebelisoa sa EDS se kenyelletsa bobeli bo phahamengtage le low-voltaglihlahisoa tsa e. Bakeng sa molumo o tlasetage (mefuta ea LV) lihlahisoa, ho na le lisebelisoa tse peli tsa matla bakeng sa ho fokotsa mosebetsi; bakeng sa matla a phahamengtaglihlahisoa tsa e (HV model), ho na le motlakase o le mong feela. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.

MOHATO 1: Kenya lithapo tse Positive/Negative DC kapa Line/Neutral AC liteisheneng tsa V+/V- kapa L/N, ka ho latellana.
MOHATO 2: Ho thibela lithapo tsa DC kapa tsa AC hore li se ke tsa theoha, sebelisa screwdriver e nyane ea flatblade ho tiisa wirecl.amp dikurufu ka pele ho sehokedi sa boloko ba theminale. MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ho terminal block receptor, e ka lehlakoreng le letona la lisebelisoa tsa EDS.

Ho thaepa Lisebelisoa tsa Dijithale

Sesebelisoa sa EDS se na le sete e le 'ngoe ea lisebelisoa tsa digital (DI). DI e na le likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin ka lehlakoreng le letona la EDS. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.

MOHATO 1: Kenya lithapo tse mpe (fatše)/positive DI ho li-terminals tsa ┴/I, ka ho latellana.
MOHATO 2: Ho thibela lithapo tsa DI hore li se ke tsa theoha, sebelisa screwdriver e nyane e nang le lehare ho tiisa terata.amp konopo e ka pele ho sehokelo sa block block.
MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ho terminal block receptor, e ka lehlakoreng le letona la lisebelisoa tsa EDS.

Ho potoloha Module ea Matla

Mojule oa matla oa sesebelisoa sa EDS o ka fetoloa ho etsa hore ho be bonolo ho lumellana le ts'ebeliso ea sebaka sa hau sa tšimo.
Mohato oa 1: Tlosa li-screws tse peli tse tiisang mochine oa matla ho sesebelisoa sa EDS.
Mohato oa 2: Tlosa mojule oa matla.
Mohato oa 3: Fetolela mojule oa matla ho ea ka oache e le hore matla, kenyeletso ea dijithale, le likhokahano tse tsoang ho relay li ka isoa holimo.
Mohato oa 4: Beha mojule ho sesebelisoa sa EDS ebe u fatella li-screws tse peli ho module.

Likhokahano tsa Puisano

Sesebelisoa se seng le se seng sa EDS-4008 Series se na le mefuta e fapaneng ea likou tsa puisano:

• RJ45 console port (RS-232 interface)
• Boema-kepe ba polokelo ea USB (sehokelo sa mofuta oa A, se koetsoeng hajoale)
• sekotjana sa karete ea microSD (hajoale se holofetse)
• 10/100BaseTX Ethernet likou
• 100BaseFX (SC/ST-mofuta oa sehokelo) likoung tsa fiber
• 10/100/1000BaseT(X) likou tsa Ethernet
• 100/1000BaseSFP boema-kepe

Khokahano ea Port Port
Sesebelisoa sa EDS se na le kou e le 'ngoe ea li-console ea RJ45 (RS-232), e sebakeng se ka pele. Sebelisa RJ45-to-DB9 (sheba thapo e latelang litšoantšo tsa wiring) ho hokela koung ea khomphutha ea EDS boema-kepeng ba COM ea PC ea hau. U ka sebelisa lenaneo la "console terminal", joalo ka Moxa PCm Terminal Emulator, ho fihlella EDS e nang le sekhahla sa baud sa 115200.

RJ45 Console Port pinouts

Pin	Tlhaloso
1	DSR
2	RTS
3	-
4	TxD
5	RxD
6	GND
7	CTS
8	DTR

Khokahano ea USB
HLOKOMELA Ts'ebetso ea USB ha joale e bolokiloe 'me e ka hlokoa nakong e tlang. Hoa lokela ho hlokomeloa hore kou ena e ke ke ea sebelisoa bakeng sa ho tjhaja lisebelisoa leha e le life.

10/100BaseT(X) Khokelo ea Ethernet Port
Likou tsa 10/100BaseT(X) tse karolong e ka pele ea switch li sebelisoa ho hokela lisebelisoa tse sebelisoang ke Ethernet. Basebelisi ba bangata ba tla khetha ho lokisa likou tsena bakeng sa Auto MDI/MDI-X mode, moo pinouts ea koung e fetoloang ka bo eona ho latela mofuta oa thapo ea Ethernet e sebelisitsoeng (ho otloloha kapa ho tšela), le mofuta oa sesebelisoa ( Mofuta oa NIC kapa HUB/Switch-type) o hokahaneng le boema-kepe. Ho tse latelang, re fana ka li-pinouts bakeng sa li-port tsa MDI (NIC-type) le MDI-X (HUB/Switch-type). Hape re fana ka litšoantšo tsa lithapo tsa lithapo bakeng sa likhoele tse otlolohileng le tse tšelang Ethernet.
10/100Base T(x) RJ45 Pinouts

RJ45 (8-pin) ho ea ho RJ45 (8-pin) Ho Otloloha ka Lithapo tsa Cable 

RJ45 (8-pin) ho ea ho RJ45 (8-pin) Cross-Over Cable Wiring 

100BaseFx Ethernet Port Connection
Mohopolo o ka morao ho boema-kepe ba SC/ST le thapo o hlakile. Ha re re u hokahanya lisebelisoa tsa I le II. Ho fapana le matšoao a motlakase, matšoao a optical ha a hloke potoloho e le hore a fetise data. Ka lebaka leo, e 'ngoe ea mela ea optical e sebelisetsoa ho fetisetsa data ho tloha mochine oa I ho ea ho sesebelisoa sa II,' me mohala o mong oa optical o sebelisoa ho fetisetsa data ho tloha mochine oa II ho ea ho sesebelisoa sa I, bakeng sa phetisetso e feletseng ea duplex. Sohle seo u hlokang ho se hopola ke ho hokahanya boema-kepe ba Tx (ho fetisa) ea sesebelisoa sa I ho boema-kepe ba Rx (amohela) sesebelisoa sa II, le boema-kepe ba Rx (ho amohela) sesebelisoa sa I ho sekepe sa Tx (ho fetisa) sa sesebelisoa II. Haeba u iketsetsa thapo ea hau, re fana ka maikutlo a hore u ngole mahlakore a mabeli a mola o le mong ka litlhaku tse tšoanang (A-to-A le B-to-B, joalo ka ha ho bontšoa ke papiso e latelang, kapa A1-to-A2 le B1 -ho-B2).

TLHOKOMELO
Ena ke sehlahisoa sa Class 1 Laser/LED. Ho thibela tšenyo ea mahlo a hau, u se ke ua sheba ka ho toba lebone la laser.

1000BaseT(X) Khokelo ea Boema-kepe ba Ethernet
Lintlha tsa 1000BaseT(X) li fetisoa ka lipara tse fapaneng tsa TRD+/- holim'a lithapo tsa koporo.
MDI/MDI-X Port pinouts

Pin	Letshwao
1	TRD(0)+
2	TRD(0)-
3	TRD(1)+
4	TRD(2)+
5	TRD(2)-
6	TRD(1)-
7	TRD(3)+
8	TRD(3)-

100/1000BaseSFP (mini-GBIC) Fiber Port 

Likou tsa li-fiber tsa Gigabit Ethernet ho switch ke 100/1000BaseSFP fiber ports, tse hlokang ho sebelisa 100M kapa 1G mini-GBIC fiber transceivers ho sebetsa hantle. Moxa e fana ka khetho e felletseng ea mefuta ea transceiver bakeng sa litlhoko tse fapaneng tsa sebaka.
Mohopolo o ka morao ho boema-kepe ba LC le cable o otlolohile. Ha re re u hokahanya lisebelisoa tsa I le II; khahlanong le matšoao a motlakase, matšoao a optical ha a hloke potoloho e le hore a fetise data. Ka lebaka leo, e 'ngoe ea mela ea optical e sebelisetsoa ho fetisetsa data ho tloha mochine oa I ho ea ho sesebelisoa sa II,' me mohala o mong oa optical o sebelisoa ho fetisetsa data ho tloha mochine oa II ho ea ho sesebelisoa sa I, bakeng sa phetisetso e feletseng ea duplex.
Hopola ho hokela boema-kepe ba Tx (phetisetsa) sesebelisoa sa I ho boema-kepe ba Rx (fumana) ea sesebelisoa II, le boema-kepe ba Rx (amohela) sesebelisoa sa I boema-kepeng ba Tx (ho fetisa) ea sesebelisoa II. Haeba u iketsetsa thapo, re fana ka maikutlo a hore u ngole mahlakore a mabeli a mola o le mong ka litlhaku tse tšoanang (A-to-A le B-to-B, joalokaha ho bontšitsoe ka tlase, kapa A1-to-A2 le B1-to-B2 ).

TLHOKOMELO
Ena ke sehlahisoa sa Class 1 Laser/LED. Ho qoba ho baka tšenyo e tebileng mahlong a hau, u se ke ua sheba ka ho toba Beam ea Laser.

Seta Botjha Konopo

Ho na le mesebetsi e 'meli e fumanehang ho Konopo ea Reset. E 'ngoe ke ho seta bocha switch ea Ethernet ho li-setting tsa kamehla tsa feme ka ho tobetsa le ho ts'oara konopo ea Reset bakeng sa metsotsoana e 5. Sebelisa ntho e nchocho, joalo ka sekotwana sa pampiri se otlolohileng kapa toothpick, ho hatella konopo ea Reset. Sena se tla etsa hore STATE LED e panye hang ka motsotsoana. Kamora ho hatella konopo bakeng sa metsotsoana e 5 e tsoelang pele, STATE LED e tla qala ho panya ka potlako. Sena se bontša hore litlhophiso tsa kamehla tsa feme li kentsoe 'me u ka lokolla konopo ea reset. Mosebetsi o mong ke ho qala sesebelisoa ka ho hatella konopo ea reset bakeng sa metsotsoana e mehlano.

Turbo Ring DIP Switch Settings
Lisebelisoa tsa EDS ke li-switch tsa Ethernet tse laoloang ke plug-and-play. Proprietary Turbo Ring protocol e entsoe ke Moxa ho fana ka ts'epo e ntle ea marang-rang le nako ea ho hlaphoheloa kapele. Nako ea ho hlaphoheloa ea Moxa Turbo Ring e ka tlase ho 50 ms (Turbo Ring V2) - ha e bapisoa le nako ea ho hlaphoheloa ea metsotso e 3 ho isa ho e 5 bakeng sa li-switches tsa khoebo—
ho fokotsa tahlehelo e ka bakoang ke ho hlōleha ha marang-rang sebakeng sa indasteri.
Ho na le Liphetoho tse hlano tsa Hardware DIP bakeng sa Turbo Ring karolong e ka tlaase ea mochine oa EDS e ka thusang ho hlophisa Turbo Ring habonolo ka mor'a metsotsoana. Haeba u sa batle ho sebelisa sesebelisoa sa DIP sa Hardware ho seta Ring ea Turbo, u ka sebelisa a web sebatli, telnet, kapa console ho tima tšebetso ena.
HLOKOMELA Ka kopo sheba karolo ea Turbo Ring ho Buka ea Mosebelisi bakeng sa lintlha tse ling mabapi le tlhophiso le ts'ebeliso ea Turbo Ring V2.
Turbo Ring DIP Switch Settings

Tlhophiso ea kamehla bakeng sa Switch ka 'ngoe ea DIP e TIMA. Tafole e latelang e hlalosa phello ea ho beha DIP Switjha ho boemo ba ON.
Tlosa sekoaelo sa rabara karolong e ka tlaase ea sesebelisoa ho pepesa li-switches tsa DIP.

DIP Switch Settings

KOTSA 1	KOTSA 2	KOTSA 3	KOTSA 4	KOTSA 5
E boloketsoe bokamoso tshebediso	ON: E nolofalletsa ho	ON: E nolofalletsa	BULELA:	ON: E bula
	kamehla "Ring Coupling (bekapo)" koung ha DIP switjha 4 e se e butswe. OFF: E nolofalletsa ho	EDS ena e le Ring Monghadi. — TLHOKOMELISO: Sena	E nolofalletsa ea kamehla "Ring Coupling" e mong. OFF: Sena	DIP switjha 2, 3, le 4 ho lokisa Turbo Ring V2 litlhophiso. TIMA: DIP -
	default Ring Coupling (ea mantlha) kou ha DIP switjha 4 e se e butswe.	EDS e ke ke ea e-ba Ring Monghadi.	EDS e ke ke ea e-ba Ring Banyalani.	switjha 2, 3, le 4 e tla ba bokooa.

HLOKOMELA O tlameha ho bulela Turbo Ring (DIP switjha 5) pele pele o sebedisa switjha ya DIP ho kenya tshebetsong tshebetso ya Master le Coupler.
HLOKOMELA Haeba u sa lumelle li-switches tsa EDS hore e be Ring Master, protocol ea Turbo Ring e tla ikhethela switch ea EDS e nang le lethathamo le lenyenyane la liaterese tsa MAC hore e be Ring Master. Haeba ka phoso o ka etsa hore switjha e fetang e le 'ngoe e be Ring Master, li-switches tsena li tla buisana ka bo eona ho fumana hore na ke ofe eo e tla ba Ring Master.

Lipontšo tsa LED

Karolo e ka pele ea Moxa EDS-4008 Series e na le matšoao a 'maloa a LED. Mosebetsi oa LED ka 'ngoe o hlalosoa tafoleng e latelang:
Lisebelisoa tsa lisebelisoa tsa LED

LED	Mmala	Naha	Tlhaloso
TŠEBELETSO	Botala	On	Ha sistimi e se e fetile tlhahlobo ea matla a ho itlhahloba (POST) mme e se e loketse ho sebetsa.
		Ho panya (1 nako/mots.)	Tobetsa konopo ea reset bakeng sa metsotsoana e mehlano ho seta bocha ho li-setting tsa kamehla tsa feme.
		Ho panya (Makhetlo a 4 / set lao)	Ha o tobetsa konopo ea reset, hatelle metsotsoana e 5 ho khutlela ho fektheri ea kamehla.
		E tima	N/A
	Khubedu	On	Sistimi e hlolehile ho qala ts'ebetso ea ho qala • Tsamaiso Info. Bala phoso ea Fail kapa EEPROM ea tlhaiso-leseling.
PHOTO	Khubedu	On	1. Khokahano ea relay e hlahisitsoe. 2. Moeli oa sekhahla sa ho kena o fetisitsoe mme boema-kepe bo kene mokhoeng oa ho koala. 3. Khokelo e sa sebetseng ea Ring port.
		E tima	Ha sistimi e qala mme e sebetsa ka nepo kapa ketsahalo e hlophisitsoeng ke mosebelisi ha e bakoe.
P1	Amber	On	Matla a ntse a fanoa ho PWR ea motlakase.
		E tima	Matla ha a fanoe ho PWR ea motlakase.
P2	Amber	On	Matla a ntse a fanoa ho PWR ea motlakase.
		E tima	Matla ha a fanoe ho PWR ea motlakase.

LED	Mmala	Naha	Tlhaloso
MSTR/ HLOOHO (M/H)	Botala	On	Ha switjha e le Master/Head/Root of Turbo Ring/Turbo Chain/Fast RSTP.
		Ho panya (Makhetlo a 4 / set lao)	1. Phetoho e fetohile Monghali oa Turbo Ring ka mor'a hore Turbo Ring e theohe. 2. Sesebelisoa se behiloe e le Hlooho ea Turbo Chain le Turbo Chain e theohile. 3. Phetoho e behiloe e le Setho sa Ring ea Turbo mme Ring port e tsamaisanang e theohile. 4. Phetoho e behiloe e le Setho sa Turbo Chain / Mohatla 'me sekepe se tsamaisanang sa Head-end Chain se theohile.
		E tima	Ha switjha e se Monghali/Hlooho/Motso oa Ring ena ea Turbo/ Turbo Chain/Fast RSTP.
CPLR/ MOELA	Botala	On	1. Ho kopanya lesale la switjha kapa ts'ebetso e 'meli ea homing e nolofalitsoe. 2. Phetoho e behiloe e le Mohatla oa Turbo Chain.
		Ho panya (Makhetlo a 4 / set lao)	1. Sesebelisoa se behiloe ha Mohatla oa Turbo Chain le Chain e theohile. 2. Phetoho e behiloe e le Setho / Hlooho ea Turbo Chain 'me Chainport ea Tail-end e tsamaisanang e theohile.
		E tima	Ha sesebelisoa se tima karolo ea ho kopanya kapa mohatla oa Turbo Chain.
Tsamaiso LED (Ntle PWR)	Botala + Amber + Bokhubelu	Ho panya (Makhetlo a 2 / set lao)	Sesebelisoa se ntse se sibolloa / se fumaneha ke ts'ebetso ea sebaka.
Tsamaiso LED (Ntle PWR)	Botala + Amber + Bokhubelu	Fetola -> Koala Ka tatellano	Phetoho ke ho kenya / ho romela thepa a file ka ABC-02-USB kapa karete ea SD. (hajoale e holofetse)

Lipontšo tsa Smart PoE LED

LED	Mmala	Naha	Tlhaloso
Smart PoE + LED Lipontšo	Botala	On	Ha boema-kepe bo hoketsoe ho sesebelisoa sa IEEE 802.3bt 'me se tsamaisoa ho: • Mosaeno o le mong (PD) Sehlopha sa 5 ho isa ho sa 8. • Mosaeno oa Habeli (PD) Sehlopha sa 1 ho isa ho sa 5.
		E tima	1. Ha matla a sa fanoe ho sesebelisoa sa motlakase (PD). 2. Boema-kepe ha bo kopane le sesebelisoa se tsamaisoang ke IEEE 802.3bt.
	Amber	On	Ha boema-kepe bo hoketsoe ho IEEE 802.3af/at sesebelisoa se tsamaisoang 'me se tsamaisoa ho: • Mosaeno o le mong (PD) 0 ho isa ho 4.
		Ho panya (Makhetlo a 4 / set lao)	Phepelo ea motlakase ea PoE e koetsoe ka lebaka la tekanyetso e tlase ea matla.
		E tima	1. Matla ha a fanoe ho sesebelisoa sa motlakase (PD). 2. Boema-kepe ha bo kopane le IEEE 802.3af/at standard PD.
	Khubedu	On	Ho fumanoa ha sesebelisoa se matla (PD). ho hloleha.
		Ho panya (Makhetlo a 4 / set lao)	Overcurrent e etsahetse ho sesebelisoa sa powered (PD).
		E tima	PoE e sebetsa ka mokhoa o tloaelehileng.

Lipontšo tsa li-Ports LED 

LED	Mmala	Naha	Tlhaloso
10M /100M Copper top LED	Botala	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
10M / 100M LED e tlase ea koporo	Amber	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 10Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 10Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
10M / 100M / 1000M Copper top LED	Botala	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 1000Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 1000Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
10M / 100M / 1000M LED e tlase ea koporo	Amber	On	Ha boema-kepe bo sebetsa le lihokelo ho 10/100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 10/100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa sehokelo fatshe.
100M LED ea fiber	Botala	On	Ha data ea boema-kepe e ntse e fetisoa ho 100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
100M / 1000M (SFP boema-kepe)	Botala	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 1,000Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 1,000Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
	Amber	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.

Litlhaloso

Sehokedi
RJ45 Boema-kepe	10/100BaseT(X) or 10/100/1000BaseT(X)
Likepe tsa Fiber	100BaseFx 100/1000BaseSFP
Kou ea Console	RS-232 (RJ45)
Konopo	Seta botjha konopo
Lipontšo tsa LED	BOEMO (LI-), MOLATO (F), PWR1 (P1), PWR2 (P2), MSTR/HLOOHO (M/H), CPLR/TAIL (C/T), SYNC
Lebitso la Alamo	1 ka tloaelo e bula tlhahiso ea relay ea motlakase e nang le matla a hajoale a 1 A @ 24 VDC
Input ea dijithale	Kenyelletso e le 'ngoe ea dijithale e ikhethileng: +13 ho ea ho +30V bakeng sa boemo "1" -30 ho +3V bakeng sa boemo "0" Max. hona joale ho kenya: 8 mA
Poe
TLHOKOMELISO: Ha ho hlokahala ho hokela likou tsa PoE tsa mohlala oa Power Bypass (-LVA) ho mofuta oa Power Boost (-LVB) ka har'a sistimi e ts'oanang, u se ke ua sebelisa matla a tšoanang ho matlafatsa mefuta ka bobeli.
Kakaretso ea Budget ea Matla	Power Bypass (-LVA model): 240 W @ 48 VDC power input Power Boost (-LVB model): 62 W @ 12 VDC, 150 W @ 24 VDC (120 W for -T model), 180 W @ 48 VDC
PoE Output Voltage	55 VDC
PoE Output Power	15.4 W bakeng sa maemo a 802.3af, 30 W bakeng sa 802.3at e tloaelehileng, 36 W ka mokhoa o phahameng oa matla, 60 W ho 802.3bt e tloaelehileng.
PoE Output Current	350 mA bakeng sa maemo a 802.3af, 600 mA bakeng sa maemo a 802.3, 1960 mA bakeng sa maemo a 802.3bt
Tšireletso e Felletseng ea Hona Joale Koung	Hlahisa
PoE Pinout	Mokhoa oa A: Para 1,2 (V +); Para 3,6 (V-) Mokhoa oa B: para 4,5 (V +); para 7,8 (V-)
Matla
Module ea Matla e kentsoeng esale pele	-LV/-LV-T mehlala: PWR-100–LV -HV/-HV-T mefuta: PWR-105-HV-I -LVA/-LVA-T mehlala: PWR-101-LV-BP-I -LVB/-LVB-T mehlala: PWR-103-LV-VB-I
Hlokomela	Letoto la EDS-4008 le ts'ehetsa phepelo ea motlakase ea modular. Mabitso a mohlala le li-parameter tsa matla li khethoa ke module ea matla e kentsoeng. Bakeng sa mohlalaampLe: EDS-4008-T + PWR-100-LV = EDS-4008-LV-T EDS-4008-T + PWR-105-HV-I = EDS-4008-HV-T Haeba u kenya mochine o fapaneng oa matla, sheba litlhaloso tsa mohlala o lumellanang. Bakeng sa mohlalaample, haeba u nkela sebaka sa motlakase oa EDS-4008-LV-T ka PWR-105-HV-I, bua ka litlhaloso tsa EDS-4008-HV-T.

Sehokedi
RJ45 Boema-kepe	10/100BaseT(X) or 10/100/1000BaseT(X)
Likepe tsa Fiber	100BaseFx 100/1000BaseSFP
Kou ea Console	RS-232 (RJ45)
Konopo	Seta botjha konopo
Lipontšo tsa LED	BOEMO (LI-), MOLATO (F), PWR1 (P1), PWR2 (P2), MSTR/HLOOHO (M/H), CPLR/TAIL (C/T), SYNC
Lebitso la Alamo	1 ka tloaelo e bula tlhahiso ea relay ea motlakase e nang le matla a hajoale a 1 A @ 24 VDC
Input ea dijithale	Kenyelletso e le 'ngoe ea dijithale e ikhethileng: +13 ho ea ho +30V bakeng sa boemo "1" -30 ho +3V bakeng sa boemo "0" Max. hona joale ho kenya: 8 mA
Poe
TLHOKOMELISO: Ha ho hlokahala ho hokela likou tsa PoE tsa mohlala oa Power Bypass (-LVA) ho mofuta oa Power Boost (-LVB) ka har'a sistimi e ts'oanang, u se ke ua sebelisa matla a tšoanang ho matlafatsa mefuta ka bobeli.
Kakaretso ea Budget ea Matla	Power Bypass (-LVA model): 240 W @ 48 VDC power input Power Boost (-LVB model): 62 W @ 12 VDC, 150 W @ 24 VDC (120 W for -T model), 180 W @ 48 VDC
PoE Output Voltage	55 VDC
PoE Output Power	15.4 W bakeng sa maemo a 802.3af, 30 W bakeng sa 802.3at e tloaelehileng, 36 W ka mokhoa o phahameng oa matla, 60 W ho 802.3bt e tloaelehileng.
PoE Output Current	350 mA bakeng sa maemo a 802.3af, 600 mA bakeng sa maemo a 802.3, 1960 mA bakeng sa maemo a 802.3bt
Tšireletso e Felletseng ea Hona Joale Koung	Hlahisa
PoE Pinout	Mokhoa oa A: Para 1,2 (V +); Para 3,6 (V-) Mokhoa oa B: para 4,5 (V +); para 7,8 (V-)
Matla
Module ea Matla e kentsoeng esale pele	-LV/-LV-T mehlala: PWR-100–LV -HV/-HV-T mefuta: PWR-105-HV-I -LVA/-LVA-T mehlala: PWR-101-LV-BP-I -LVB/-LVB-T mehlala: PWR-103-LV-VB-I
Hlokomela	Letoto la EDS-4008 le ts'ehetsa phepelo ea motlakase ea modular. Mabitso a mohlala le li-parameter tsa matla li khethoa ke module ea matla e kentsoeng. Bakeng sa mohlalaampLe: EDS-4008-T + PWR-100-LV = EDS-4008-LV-T EDS-4008-T + PWR-105-HV-I = EDS-4008-HV-T Haeba u kenya mochine o fapaneng oa matla, sheba litlhaloso tsa mohlala o lumellanang. Bakeng sa mohlalaample, haeba u nkela sebaka sa motlakase oa EDS-4008-LV-T ka PWR-105-HV-I, bua ka litlhaloso tsa EDS-4008-HV-T.

E lekantsoe Voltage	Mefuta ea -LV/-LV-T: 12/24/48 VDC, lisebelisoa tse peli tse sa hlokahaleng -HV/-HV-T mehlala: 110/220 VDC/VAC, kenyeletso e le 'ngoe Mefuta ea -LVA/-LVA-T: 48 VDC, lisebelisoa tse peli tse sa hlokahaleng Mefuta ea -LVB/-LVB-T: 12/24/48 VDC, lisebelisoa tse peli tse sa hlokahaleng
Tshebetso Voltage	-LV/-LV-T mehlala: 9.6 ho 60 VDC -HV/-HV-T mefuta: 88 ho 300 VDC, 85 ho 264 VAC -LVA/-LVA-T mehlala: 44 ho 57 VDC (> 52 VDC bakeng sa tlhahiso ea PoE + e khothalelitsoeng) -LVB/-LVB-T mehlala: 12 ho 57 VDC (> 52 VDC bakeng sa Tlhahiso ea PoE+ e khothalelitsoe)
E lekantsoe Hona Joale	-LV/-LV-T mehlala: 12-48 VDC, 1.50-0.40 A kapa 24 VDC, 0.70 A -HV/-HV-T mefuta: 110-220 VAC, 50-60 Hz, 0.30- 0.20 A kapa 110-220 VDC, 0.30-0.20 A -LVA/-LVA-T mehlala: 48 VDC, 5.42 A -LVB/-LVB-T mehlala: 12/48 VDC, 7.46/4.27 A kapa 24 VDC, 7.26 A
Tšebeliso ea Matla	Mefuta ea EDS-4008-LV(-T): 7.20 W EDS-4008-HV(-T) mefuta: 8.13 W Mefuta ea EDS-4008-2MST-LV(-T): 8.45 W EDS-4008-2MST-HV(-T) mehlala: 11.13 W EDS-4008-2MSC-LV(-T) mehlala: 8.45 W EDS-4008-2MSC -HV(-T) mehlala: 11.09 W EDS-4008-2SSC-LV(-T) mehlala: 8.98 W EDS-4008-2SSC-HV(-T) mehlala: 11.37 W EDS-4008-2GT-2GS-LV( -T) mehlala: 9.41 W Mefuta ea EDS-4008-2GT-2GS-HV(-T): 11.17 W EDS-4008-4P-2GT-2GS-LVA(-T) mefuta: Ntle le PoE: 11.22 W Ka PoE: Max. 240 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 48 VDC input Mefuta ea EDS-4008-4P-2GT-2GS-LVB(-T): Ntle le PoE: 15.84 W Ka PoE: Max. 180 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 48 VDC input; Max. 150 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 24 VDC input; Max. 62 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 12 VDC input
Inrush Current	Max. 0.8 A @ 48 VDC (0.1 – 1 ms) (E sebetsa ho mefuta ea -LV)
Tlatsa Tšireletso ea Hona Joale Ha U Kena	Hlahisa
Khutlela Polarity Tshireletso	Hlahisa
Khokahano	Li-terminals tse 2 tse ka tlosoang tse 4
Litšobotsi Tsa 'Mele
Matlo	Tšireletso ea tšepe, IP40
Boemo	EDS-4008(-T)/EDS-4008-2MSC(-T)/EDS- 4008-2SSC(-T) Mefuta: 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in)

	Mefuta ea EDS-4008-2MST(-T): 55 x 140 x 132 mm (2.17 x 5.51 x 5.20 in) EDS-4008-2GT-2GS(-T)/EDS-4008-4P-2GT- 2GS(-T) Mefuta: 55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in)
Boima ba 'mele	Mefuta ea EDS-4008(-T): 857 g (1.89 lb) Mefuta ea EDS-4008-2MSC(-T): 886 g (1.95 lb) Mefuta ea EDS-4008-2MST(-T): 810 g (1.79 lb) Mefuta ea EDS-4008-2SSC(-T): 882 g (1.94 lb) Mefuta ea EDS-4008-2GT-2GS(-T): 795 g (1.75 lb) EDS-4008-4P-2GT-2GS(-T) mefuta: 840 g (1.85 lb)
Ho kenya	Ho hlomamisoa ka DIN-rail, ho kenya lebota (ka khiti ea boikhethelo)
Meeli ea Tikoloho
Mocheso oa ho sebetsa	-10 ho 60 ° C (14 ho 140 ° F) bakeng sa mehlala e tloaelehileng -40 ho 75 ° C (-40 ho 167 ° F) bakeng sa mefuta ea -T
Polokelo Mocheso	-40 ho isa ho 85°C (-40 ho isa ho 185°F)
Ambient Relative Humidity	5 ho isa ho 95% (ha e fokotsehe)
Bophahamo	Ho fihlela ho 2000 m Tlhokomeliso: Ka kopo ikopanye le Moxa haeba u hloka lihlahisoa tse tiisitsoeng hore li tla sebetsa hantle sebakeng se phahameng.
Litumello tsa Taolo
Indasteri Cybersecurity	IEC 62443-4-1, IEC 62443-4-2
Polokeho	UL 61010-2-201, EN 62368-1(LVD)
EMC	EN 55032/35, EN 61000-6-2/6-4
EMI	FCC Karolo ea 15 Karolo ea B Sehlopha sa A
EMS	EN 61000-4-2 (ESD) Mohato 4 EN 61000-4-3 (RS) Mohato 3 EN 61000-4-4 (EFT) Mohato 4 EN 61000-4-5 (Surge) Mohato 4 EN 61000-4-6 (CS) Mohato 3 EN 61000-4-8 Mohato oa 4
Ho tshoha	Tlhaloso: IEC 60068-2-27
Hoetla mahala	Tlhaloso: IEC 60068-2-32
Ho thothomela	Tlhaloso: IEC 60068-2-6
Sebaka se Kotsi	Sehlopha sa I Division 2, ATEX, IECEx
Sephethephethe sa Terene (Tselang)	EN 50121-4
Taolo ea Sephethephethe	NEMA TS2
Tiisetso
Tiisetso	5 lilemo

 TLHOKOMELO
Sesebelisoa sena se lumellana le Karolo ea 15 ea melao ea FCC.
Ts'ebetso e ipapisitse le maemo a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.

Boitsebiso ba Sebaka se Kotsi (ntle le mefuta ea PoE le HV)

Lintlha tsa ATEX
	II 3G Ex ec nC IIC T4 Gc
	UL 22 ATEX 2741X Ambient Range: -40°C ≤ Tamb ≤ +75°C for -T models Ambient Range: -10°C ≤ Tamb ≤ +60°C bakeng sa mehlala ntle le “-T” E lekantsoe Cable Temp. ≥ 90.4°C TEMOSO-U SE KE UA AROHANA HA U HLAHISITSOE
Setifikeiti sa IECEx No.	IECEx UL 22.0031X
Aterese ea moetsi	No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan

TLHOKOMELISO – KOTSI EA HO PHAHAMA
Se ke oa hakolla sesebelisoa sena ntle le haeba mohloli oa motlakase o tlositsoe kapa o tingoa, kapa sebaka sa ho kenya se tsejoa e le se seng kotsi.

Maemo le Litifikeiti 

Sebaka se Kotsi

Khatiso ea 60079 ea IEC 0-7 Khatiso ea 60079 ea IEC 7-5.1 Khatiso ea 60079 ea IEC 15-5 EN IEC 60079-0:2018 EN IEC 60079-7:2015+A1:2018 EN IEC 60079-15:2019

Boemo bo Ikhethileng ba Tšebeliso

• Lisebelisoa li tla sebelisoa feela sebakeng sa bonyane tekanyo ea 2 ea tšilafalo, joalo ka ha ho hlalositsoe ho IEC/EN 60664-1.
• Thepa e tla kengoa ka har'a moaho o fanang ka tšireletso e tlase ea IP 54 ho latela IEC/EN 60079-0 mme e fumaneha feela ka tšebeliso ea sesebelisoa.

© 2022 Moxa Inc. Litokelo tsohle li sirelelitsoe.
P/N: 1802040080011

Litokomane / Lisebelisoa

	MOXA EDS-4008 Series EtherDevice Switch [pdf] Tlhophiso Tataiso EDS-4008 Series EtherDevice Switch, EDS-4008 Series, EtherDevice Switch, Switch
	MOXA EDS-4008 Series EtherDevice Switch [pdf] Tlhophiso Tataiso EDS-4008 Series EtherDevice Switch, EDS-4008 Series, EtherDevice Switch, Switch

Litšupiso

• Bukana ea Mosebelisi