midiplus MS Series Active Studio Monitor
Selelekela
Thank you for choosing MS series active studio monitors. This 2-way active monitoring system consists of a silk dome tweeter and carbon fiber cone woofer, along with an efficient Class-D power amplifier. It provides a neutral tool for recording engineers and producers to analyze recordings and optimize mixing. The MS series studio monitors has three inputs: balanced XLR, 1/4″ Jack, and unbalanced RCA, as well as Bluetooth connectivity. This makes it suitable for use in both large recording studio and home studio. To ensure proper use and understanding of the monitors, please read the manual carefully and keep it in a safe place for future reference.
Litaelo tsa Bohlokoa tsa Tšireletso
Please read the following safety instructions before setting up your system. To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property. These precautions include, but are not limited to, the following:
- Bala Litaelo tsena.
- Boloka Litaelo tsena.
- Mamela Litemoso Tsohle.
- Latela Litaelo tsohle.
- Se ke oa sebelisa sesebelisoa sena haufi le metsi.
- Hloekisa feela ka lesela le omeletseng.
- Se ke oa thibela menyetla efe kapa efe ea moea. Kenya ho latela litaelo tsa moetsi.
- Se ke oa kenya haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo, kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
- Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. Agroundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Sireletsa thapo ea motlakase hore e se ke ea tsamauoa kapa e penngoa haholo-holo ho li-plug, lisebelisoa tse bonolo, le moo li tsoang teng.
- Sebelisa feela liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
- Use only with a cart,stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Tlosa sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe ka nako e telele.
- Etsa bonnete ba hore o hokela sebakeng se loketseng se nang le khokahano e sirelletsang ea motheo.
- Exposure to extremely high noise levels may cause permanent hearing loss, please pay attention to protect your hearing.
- The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation
- Lisebelisoa ha li na ho pepesetsoa ho rotha kapa ho fafatsoa le hore lintho tse tlatsitsoeng ka metsi, joalo ka li-vase, li se ke tsa beoa holim'a lisebelisoa.
- Maintain a minimum of20-30 cm distance around the apparatus for sufficient ventilation;
- Moea ha oa lokela ho sitisoa ka ho koahela masoba a moea ka lintho tse kang likoranta, masela a litafole, likharetene, joalo-joalo;
- Do not place a lighted candles on the apparatus;
TLHOKOMELO
KOTSI TŠOHO MOTLATSI
SE BULE
Lehlaseli la lehalima le nang le lets'oao la hlooho ea motsu ka har'a khutlotharo e lekanang le reretsoe ho lemosa mosebelisi ka boteng ba "volty e kotsi".tage” ka har'a sebaka se kampetsoeng sa sehlahisoa se ka bang boholo bo lekaneng ho baka kotsi ea ho tsosoa ke motlakase ho batho.
Moelelo o ka har'a khutlotharo e lekanang e reretsoe ho lemosa mosebelisi ka boteng ba litaelo tsa bohlokoa tsa ts'ebetso le tlhokomelo (ts'ebeletso) libukeng tse tsamaeang le sesebelisoa.
Only suitable for safe use in non-tropical climates.
E loketse feela ts'ebeliso e bolokehileng libakeng tse ka tlase ho 2000m ka holim'a bophahamo ba leoatle.
Front/Rear Panel Features
- 1 INPUTS: Features balanced XLR, 1/4″ Jack, and unbalanced RCA inputs.
- 3 LF TRIM switch: Adjusts the monitor’s low frequency response.
- 3 HF TRIM switch: Adjusts the monitor’s high frequency response.
- 4 VOLUME control: Controls the monitor’s volume.
- 5 Bluetooth switch: Turns the monitor’s Bluetooth ON or OFF.
- 6 AC INPUT (fuses included): Plugs the included AC power cord to here first, then insert the AC plug into the AC outlet.
- 7 Power switch: Turns the monitor’s power ON or OFF CD.
- 3 Logo LED: The two colors LED indicators the monitor’s power and Bluetooth status.
NOTE: Rapidly turning the power switch ON and OFF may cause the device’s electronics to malfunction. It is recommended to wait for at least 3 seconds after turning the power OFF before turning it ON again.
Khokahano
The monitor features balanced XLR, 1/4″ Jack, and unbalanced RCA inputs, as well as Bluetooth connectivity. To ensure optimal sound quality, use high-quality cables of the shortest length possible. Longer cables increase the chance of noise interference. Balanced cables are more resistant to noise than unbalanced cables.
NOTE: Always turn the power off before inserting and unplugging the cable.
Keletso ea XLR
The XLR input is use for balanced connection. The XLR connector is wired as follows:
1/4″ Jack Input
The 1/4″ jack input accepts both balanced TRS and unbalanced TS. The balanced TRS connector is wired as follows:
The unbalanced TS connector is wired as follows:
NOTE: The XLR and 1/4″ jack input connectors can not be used simultaneously.
Keletso ea RCA
The RCA input is an unbalanced connection. The RCA connector is wired as follows:
Khokahano ea Bluetooth
The MS series monitors features Bluetooth with True Wireless Stereo (TWS) Technology. You can play stereo music on two MS monitors via Bluetooth.
Mokhoa oa 'nete oa Wireless Stereo pairing
- Turn on both monitors.
- Press and hold the Bluetooth button on both monitors for 1 second to activate Bluetooth, you will hear a notification sound from the monitor, the front logo LED will alternate between white and ice blue.
- If your monitor is connected to a Bluetooth device, disconnect it and ensure that it is not connected.
- To pair TWS first time, double-click the Bluetooth button on the monitor you have selected as the left channel. Both monitors will emit a notification sound once the pairing is successful. The logo LED on the right channel monitor will turn blue, while the left channel monitor will alternate between white and ice blue. These monitors will automatically pair when Bluetooth is turned on next time.
NOTE: If a monitor is connected to a phone before the TWS is paired, it will be considered the left channel. If both monitors are connected to a phone, the TWS cannot be paired. Please ensure that you pair the TWS before connecting it to a phone.
Bluetooth pairing
On your phone or another Bluetooth device, find the “MS Audio” in the list of available devices and connect to it. The monitors will emit a notification sound once the monitor is connected. The front logo LED will turn blue.
Reset Bluetooth Connections
To reset the Bluetooth connection, press and hold the Bluetooth button for at least 5 seconds. At this point, you can reconnect the TWS and Bluetooth devices.
Frequency Response Trim Switches
The MS monitors’ high-frequency and low-frequency responses can be adjusted up to l.SdB in either direction to match your room’s acoustic characteristics.
LF TRIM: Adjust the low-frequency response. Setting attenuates or boosts the range below 800 Hz by l.SdB. The [0dB] position produces a flat frequency response. HF TRIM: Adjust the high-frequency response. Setting attenuates or boosts the range above 5 kHz by l.SdB. The [0dB] position produces a flat frequency response.
Litlhaloso tsa Tekheniki
| Mohlala | MSS MS6 | ||
| Mofuta | Bi-amp Sebui se Matla a 2-tsela | ||
| Frequency Response(-3dB) | 61 Hz - 21 kHz | 56 Hz - 21 kHz | |
| Frequency Response(-6dB) | 50 Hz-22 kHz | 47Hz-22kHz | |
| Max SPL@lm (Per unit) | 103 dBSPL | 105 dBSPL | |
| Kakaretso ea Crossover | 2kHz | 2kHz | |
| HF Driver Speaker | 1, Silk Dome | ||
| LF Driver Speaker | 5.25″Carbon fiber cone I | 6.5″Carbon fiber cone | |
| Lihokelo tsa ho Kena | XLR/TRS/RCA | ||
| Kena Impedans | 8kO (Balanced)/ 8kO (Unbalanced) | ||
| High-Frequency Trim | -1.SdB, 0dB, +1.SdB | ||
| Fokotsa Maqhubu a Tlase | -1.SdB, 0dB, +1.SdB | ||
| bluetooth | Bluetooth 5.1 with True Wireless Stereo Technology | ||
| Amplifier di neng di kwalwa Power | HF: 20W + LF: sow I | HF: 20W + LF: 65W | |
| AmpMofuta oa lifier | Sehlopha-D | ||
| Sesupo | White/lce Blue LED | ||
| Matla | AC 100-240V, 50/60Hz | ||
| Litekanyo (W * H * D) | 186 * 304 * 263 limilimithara | 211 * 344 * 305 mm | |
| Boima ba 'mele | 4.9 kg I | 6.3 lik'hilograma | |
Khafetsa Response Curve
Ho batle phoso
If there is something wrong with your monitors, try the following basic checks to troubleshoot:
No power or front logo LED doesn’t light
- Check the AC outlet is live.
- Check the power cord is plugged properly.
- Sheba hore sesebelisoa sa motlakase se buletsoe.
Ha ho molumo
- Check the cable is connected properly.
- Check the source device is supplying an audio signal.
- The volume control setting might be too low, try to turn up the volume gently.
- Check the XLR and 1/4″ jack input are inserted cables, make sure only use one at a time.
Molumo kapa lerata le sothehileng
- The signal cable might be corroded, shorted, please try to replace the cable.
- Check the signal level from the source device is too high.
- Check the signal from the source device is distorted
Bluetooth cannot connect or pair
- Make sure the Bluetooth is activated, please check the front logo LED weather alternate between white and ice blue.
- Make sure the Bluetooth is not connected by other device. Please press and hold the Bluetooth button for at least 5 seconds to reset the Bluetooth connection.
Litokomane / Lisebelisoa
 |
midiplus MS Series Active Studio Monitor [pdf] Bukana ea Mosebelisi v1.0.2, v1.1.2, MS Series Active Studio Monitor, MS Series, Active Studio Monitor, Studio Monitor, Monitor |