MAJOR TECH PIR48 Dual PIR Motion Sensor
Selelekela
The PIR48 automatically turns on lights or any electrical device within the sensor’s rated load when motion and body heat are detected. It has dual PIR sensors for a 180° detection area in front of the sensor and a 360° detection area directly beneath the sensor. Both sensors and the adjustable settings for time and Lux level allow the PIR48 to easily integrate into new or existing installations. With an IP65 rating, the sensor is intended for indoor or outdoor installations. Installation must be done by a qualified electrician.
Litlhaloso
| Mosebetsi | Range | Mosebetsi | Range |
|---|---|---|---|
| Moqtage | 220 - 240V AC | Lebelo la Motsamao oa ho lemoha | 0.6 - 1.5m/s |
| Maqhubu a Matla | 50/60 Hz | Mocheso oa Mosebetsi | -20 ° -40 ° C |
| Ambient Light | <3 - 2000 Lux (E ka fetoha) | Mongobo o sebetsang | <93% RH |
| Nako Ho lieha | Metsotsoana e 10 (±3 sec) ho isa ho metsotsoana e 15 (±2 mots) | Tšebeliso ea Matla | Hoo e ka bang. 0.5W |
| Rated Mojaro | 1200W Incandescent/600W LED/CFL | Kenyelletso Height | 1.8 - 2.5m |
| Sebaka sa ho Fumana ka Pele | 180° | Tšireletso ea IP | IP65 Ka Hare & Kantle |
| Sebaka se ka tlase sa ho Fumana | 360° | Hlooho ea Swivel | 45° (L ho ya ho R), 180° (Hodimo/Fase) |
| Front Detection Distance | 12m Max | Tiisetso | 5 lilemo |
| Bottom Detection Distance | 6m Max | Litekanyetso | IEC 60669-1, IEC 60669-2-1, AS/NZS 60669.1, AS/NZS 60669.2.1 |
| Ho phahamisa | Lebota le Siling Mountable |
Mosebetsi
- Sensor Can Identify between day and night (Lux Mode): The consumer can adjust working state in different ambient light. It can work in the daytime and at night when it is adjusted on the “
” position (max). It can work in ambient light less than 3 LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern. - Nako-Delay e eketsoa khafetsa: Ha sensor e bona motsamao ha lebone le ntse le butse, nako ea ho bala e qala hape. Sena se bolela hore lebone le tla lula le khantšitsoe nako eohle e behiloeng ho tloha nakong ea ha e sa tsoa fumanoa.
- Nako e fetolehang ea Nako: The sensor can be set according to the consumer’s desire (10s, 30s, 90s, 3min, 7min, 15min).
Laola Setting Information
- Turn the TIME knob anticlockwise to the minimum (10s). Turn the LUX knob clockwise to the maximum ().
- Fetola matla; sensor e tla hloka metsotsoana e 30 ho futhumala. Hang ha sensor e lemoha motsamao, lamp will turn on. If no other movement is detected within the time duration set, the light will turn off within the 10 seconds ±3 sec.
- Fetola konopo ea LUX ho ea ho bonyane (3). Haeba leseli la ambient le feta 3 Lux, sensor ha e khone ho sebetsa. Haeba leseli le le leng le le ka tlase ho 3 Lux (lefifi), sensor e tla sebetsa.
Hlokomela: When testing in daylight, please turn Lux knob to Sun position, otherwise the sensor will not work!
LEBITSO LEKHOPO
KEKETSO
- Tlosa 'me u tlose bracket ea ho lokisa ho tloha setsing sa sensor.
- Kenya thapo ea motlakase sekoting se fanoeng.
- Hokela thapo ea motlakase ka har'a boloko ba theminale ho latela setšoantšo sa lithapo.
- Khetholla sebaka se loketseng sa view 'me u sebelise likoti tse kenyang li-bracket ho netefatsa hore ho na le tlhophiso e nepahetseng bakeng sa sensor ea motsamao.
- Epa masoba 'me u fafatse brakete ea ho lokisa sebakeng se tšoailoeng.
- Kopanya sensor hape ho bracket ea ho lokisa 'me u fate li-screws.
- Hang ha ts'ebetso e felile, sotha hlooho ho ea moo u batlang ho ea teng, e sireletse, 'me u bulele matla a ho etsa liteko.
Keletso ea Keletso
- Qoba ho supa sebuela linthong tse nang le bokaholimo bo khanyang, joalo ka liipone.
- Qoba ho holisa sebuela-hole haufi le mehloli ea mocheso, joalo ka lifensetere tse futhumatsang, li-air conditioning units, khanya jj.
- Qoba ho supa sesupa linthong tse ka tsamaeang moeeng, joalo ka likharetene, limela tse telele joalo-joalo.
TŠEBELETSO TSEBISO
Hlokomela
Sensor ea PIR e sebetsa ka ho lemoha ho sisinyeha ha maballo a detector a sitisoa, hangata ke ho tsamaea ha ntho kapa motho ea tsamaeang. Haeba motho a tsamaea ka kotloloho ka pel'a kapa a lebile lebaleng, sensor e kanna ea se ke ea bona motsamao. Leha ho le joalo, ha maballo a mabeli a tšeloa, sensor ea PIR e lemoha ho sisinyeha, ha e nka phetoho ea mokhoa oa mahlaseli a mahlaseli a kotsi a bakoang ke ho sitisoa ha maballo ka bobeli. Mokhoa ona o eketsa ho nepahala ha ho sibolloa le ho fokotsa menyetla ea ho fosahetse kapa ho se lemohe.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo e reriloeng |
|---|---|---|
| Leseli kapa mojaro ha o bulele ha motsamao o bonoa | Ha ho letho voltage |
|
| Leseli le potolohileng le kanna la khanya haholo |
|
|
| Control settings incorrect |
|
|
| Sensor positioning is incorrect |
|
|
| Leseli le BONA ntle le lebaka le hlakileng (Phoso ea nakoana) | Animals, birds or moving trees |
|
| Heat sources such as air conditioners, vents, heat extractor ducts or moving vehicles |
|
|
| Light fitting heat |
|
|
| PIR Sensor affected when switching On/Off lights, fans or electrical devices on the same circuit |
|
|
| Leseli le lula le ON ka linako tsohle | Control settings incorrect |
|
| Ho Qetella Bohata |
|
|
| Tšitiso ea khanya ea letsatsi |
|
Major Tech (PTY) Ltd
- Borwa Afrika: www.major-tech.com
- Australia: www.majortech.com.au
- Lengolo-tsoibila: sales@major-tech.com
- Lengolo-tsoibila: info@majortech.com.au
LBH
Can the Lux level be adjusted manually?
Yes, the Lux level on the PIR48 sensor is adjustable to meet your specific lighting requirements. Refer to the user manual for instructions on adjusting the Lux level.
What is the recommended installation height for the PIR48 sensor?
The recommended installation height for optimal performance of the PIR48 sensor is between 2 to 3 meters above the ground level. This height range ensures effective motion detection coverage.
Litokomane / Lisebelisoa
 |
MAJOR TECH PIR48 Dual PIR Motion Sensor [pdf] Buka ea Taelo PIR48 Dual PIR Motion Sensor, PIR48, Dual PIR Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor |