M5STACK AtomS3R e Kenyellelitsoe Haholo-holo Taolo e ka Rarohang
Tlhaloso
- MCU: ESP32-S3-PICO-1-N8R8 @ Xtensa dual-core 32-bit LX7, 240MHz
- Bokhoni ba Puisano: Wi-Fi, BLE, OTG/CDC ts'ebetso, emitter ea infrared, katoloso ea sensor ea I2C
- Phepelo Voltage: Ha ea hlalosoa
- Bokhoni ba ho Boloka Flash: Ha bo boleloe
- Bokhoni ba Polokelo ea PSRAM: Ha bo boleloe
- Skrine: 0.85-inch IPS skrineng
- Li-sensor: Magnetometer (BMM150), Accelerometer le Gyroscope (BMI270)
- Konopo: Konopo e ka hlophisehang ka tlase ho skrini
- Katoloso ea Sehokelo: HY2.0-4P segokanyimmediamentsi sa sebolokigolo
- Litekanyo: 24 * 24 * 12.9 mm, M2 screw lesoba ka morao bakeng sa ho lokisa
- Thempereichara ea ho sebetsa: Ha e hlalosoe
- Maqhubu a Mosebetsi oa Wi-Fi: 802.11b/g/n20:2412 MHz-2472 MHz, 802.11n40:2422 MHz-2462 MHz, 802.11b:2484 MHz
- BLE Nako ea ho sebetsa: 2402MHz-2480MHz, 2422 MHz-2462 MHz
- Matla a Phetiso ea Wi-Fi: 802.11b:17.27dBm, 802.11g:16.82dBm
- BLE Boholo ba EIRP: 21.76dBm
- Wi-Fi Maximum Conducted Peak Output Power: Ha e hlalosoe
- BLE Boholo bo Etsoang Matla a Phahamiso ea Phahamiso: 8.71dBm
- E lekantsoe Hajoale: 0.5A
- Moetsi: M5STACK TECHNOLOGY CO., LTD.
- Aterese ea moetsi: 501, Tangwei Business Building, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China
Litaelo tsa Tšebeliso ea Sehlahisoa
Qala ka Potlako
Bula Arduino IDE (Sheba ho Tataiso ea ho kenya Arduino IDE) bakeng sa boto ea nts'etsopele le software.
Hlakola Wi-Fi
Latela litaelo tse fanoeng bukeng ea mosebelisi ho fihlella tšebetso ea ho sekena ha Wi-Fi.
Skena sesebelisoa sa BLE
Sheba bukana ea mosebelisi bakeng sa mehato e felletseng ea ho skena lisebelisoa tsa BLE.
Tlhokomeliso ea FCC
Bala le ho latela temoso ea FCC e fanoeng bukeng ea mosebelisi bakeng sa ts'ebetso e bolokehileng le ho latela melao.
LBH
- P: Phallo ea matla ke engtagbakeng sa AtomS3R?
- A: Phepelo voltage bakeng sa AtomS3R ha ea hlalosoa bukeng ea mosebelisi.
- Q: Nka holisa li-sensor ho AtomS3R joang?
- A: AtomS3R e tšehetsa khokahanyo le katoloso ea li-sensor tsa I2C ka sebopeho sa HY2.0-4P.
M5AtomS3R
Mohlala: AtomS3R
2024
TLHOKOMELO
AtomS3R ke molaoli o kenyellelitsoeng haholo o kenyellelitsoeng ho latela microcontroller ea ESP32-S3. E kopanya ESP32-S3-PICO-1-N8R8 molaoli ea ka sehloohong, WiFi le BLE tshebetso, 8MB onboard FLASH, le 8MB PSRAM; skrine ea IPS ea 0.85-inch; konopo ea programmable ka tlase ho skrine; potoloho ea ka hare ea 5V ho ea ho 3.3V; BMM150 magnetometer le BMI270 accelerometer le gyroscope; sebopeho sa onboard Type-C bakeng sa phepelo ea motlakase le ho jarolla firmware; boema-kepe ba katoloso ea HY2.0-4P; GPIO tse tšeletseng le lithakhisa tsa matla ka tlase bakeng sa katoloso e bonolo. Saese ea sehlahisoa ke 24 * 24 * 12.9mm feela, e etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tse kenelletseng tsa lisebelisoa tse bohlale.
ATOMS3R
- Bokhoni ba Puisano
- Molaoli ea ka Sehloohong: ESP32-S3-PICO-1-N8R8
- Puisano e se nang mohala: Wi-Fi (WIFI), BLE Mosebetsi
- Phetiso ea Infrared: Transmitter ea infrared bakeng sa tšebelisano ea taolo ea infrared Katoloso ea Sehokelo: HY2.0-4P interface, e ts'ehetsa khokahano le katoloso ea li-sensor tsa I2C
- processor le Tshebetso
- Mohlala oa processor: Xtensa LX7 (ESP32-S3-PICO-1-N8R8)
- Bokhoni ba polokelo: 8MB Flash, 8MB PSRAM
- Maqhubu a Ts'ebetso ea processor: Xtensa® dual-core 32-bit LX7 microprocessor, ho fihla ho 240 MHz
- Pontsho le Kenyo
- Skrine: 0.85-inch IPS skrine
- Konopo: Konopo e ka reroang ka tlase ho skrini
- Li-sensor
- MagnetometerTlhaloso: BMM150
- Accelerometer le GyroscopeTlhaloso: BMI270
- Lithakhisa tsa GPIO le li-interfaces tse ka khonehang
- Grove Interface: E tšehetsa khokahano le katoloso ea li-sensor tsa I2C
- Lithakhisa tse Tlaase: Matla le lithakhisa tse 6 tsa GPIO
- Ba bang
- Sebopeho sa Onboard: Sebopeho sa mofuta oa C bakeng sa ho etsa mananeo le puisano ea serial
- Litekanyo tsa 'Mele: 24*24*12.9 mm, e nang le lesoba la screw M2 ka morao bakeng sa ho lokisoa
LIEKETSENG TS'OANELO
| Parameter le tlhaloso | Boleng | |
| MCU | ESP32-S3-PICO-1-N8R8 @ Xtensa dual-core 32-bit LX7, 240MHz | |
| Bokhoni ba Puisano | Wi-Fi, BLE, OTG/CDC ts'ebetso, emitter ea infrared, katoloso ea sensor ea I2C | |
| Phepelo Voltage | 4.5 ~ 5.5V DC | |
| Bokhoni ba polokelo ea Flash | 8MB-Flash | |
| PSRAM Bokhoni ba ho boloka | 8MB-PSRAM | |
| Skrine | Skrine sa 0.85-inch IPS, mokhanni oa GC9107, qeto ea 128 * 128 | |
| Li-sensor | BMM150 magnetometer, BMI270 accelerometer le gyroscope | |
| Konopo | 1 konopo ea mosebelisi | |
| Sebopeho sa Katoloso | HY2.0-4P segokanyimmediamentsi sa sebolokigolo bakeng sa ho hokela le ho atolosa I2C lisensara | |
| Litekanyo | 24 * 24 * 12.9 limilimithara | |
| Mocheso oa ho sebetsa | -10°C ho isa ho 40°C | |
| MIC | Wi-Fi Working Frequency | 802.11b/g/n20:2412 MHz-2472 MHz |
| 802.11n40: 2422 MHz-2462 MHz | ||
| 802.11b:2484 MHz | ||
| BLE Nako ea ho sebetsa | 2402MHz-2480MHz | |
| CE | Wi-Fi Working Frequency | 802.11b: 2412 MHz-2472 MHz |
| 802.11g: 2412 MHz-2472 MHz | ||
| 802.11n-HT20:2412 MHz-2472 MHz | ||
| 802.11n-H40: 2422 MHz-2462 MHz | ||
| Matla a ho fetisa a Wi-Fi | 802.11b:17.27dBm | |
| 802.11g:16.82dBm | ||
| 802.11n-HT20:16.17dBm | ||
| 802.11n-H40:16.22dBm | ||
| BLE Nako ea ho sebetsa | 2402MHz-2480MHz | |
| BLE Boholo EIRP | EA-5.52dBm | |
| FCC | Wi-Fi Working Frequency | 2412 MHz-2472 MHz (802.11b,g,n-HT20) |
| 2422 MHz-2462 MHz(802.11n-H40) | ||
| Wi-Fi Maximum Conducted Peak Output Power | EA-21.76dBm | |
| BLE Nako ea ho sebetsa | 2402MHz-2480MHz(BLE 1M/2M) | |
| BLE Maximum Conducted Peak Output Power | EA-8.71dBm | |
| E lekantsoe Hona Joale | 0.5A | |
| Moetsi | M5STACK TECHNOLOGY CO., LTD. | |
| Aterese ea moetsi | 501, Tangwei Business Building, Tangwei Community, Fuhai Street, | |
| Setereke sa Bao'an, Shenzhen, China | ||
Boholo ba Sehlahisoa
PHAKAMATSO
Hatisa lintlha tsa WiFi
- Bula Arduino IDE (Sheba ho https://docs.m5stack.com/en/arduino/arduino_ide bakeng sa tataiso ea ho kenya bakeng sa boto ea nts'etsopele le software)
- Tobetsa 'me u tšoare konopo ea reset metsotsoana e 2 ho fihlela lebone le letala le bulela
- Khetha boto ea ESP32S3 DEV Module le boema-kepe bo lumellanang, ebe u kenya khoutu
- Bula sebali sa serial ho bonts'a WiFi e hlahlobiloeng le tlhahisoleseling ea matla a lets'oao
Hatisa lintlha tsa BLE
- Bula Arduino IDE (Sheba ho https://docs.m5stack.com/en/arduino/arduino_ide bakeng sa tataiso ea ho kenya bakeng sa boto ea nts'etsopele le software)
- Tobetsa 'me u tšoare konopo ea reset metsotsoana e 2 ho fihlela lebone le letala le bulela
- Khetha boto ea ESP32S3 DEV Module le boema-kepe bo lumellanang, ebe u kenya khoutu
- Bula sebali sa serial ho bonts'a BLE e hlahlobiloeng le tlhaiso-leseling ea matla
FCC
FCC Tlhokomeliso
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
BOHLOKOA HLOKO
Tlhokomeliso: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa tse ling tsa mehato e latelang.
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
Phatlalatso ea Phaello ea Mahlaseli a FCC
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. SAR e ile ea lekoa bakeng sa sesebelisoa ka mokhoa oa 'mele, 'me e khona ho fihlela moeli oa SAR oa FCC.
Litokomane / Lisebelisoa
 |
M5STACK AtomS3R e Kenyellelitsoe Haholo-holo Taolo e ka Rarohang [pdf] Bukana ea Mosebelisi AtomS3R, AtomS3R e Kopantsoeng Haholo e Felletseng ka Lenaneo la Taolo, Taolo e Kenyellelitsoeng Haholo, e Kopantsoeng ka ho Fetisisa, e Kopantsoeng, Molaoli ea ka Lebelloang. |
