LILYGO T-Display S3 Pro 2.33inch Touch Screen LCD Display WIFI Bluetooth

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Lebitso la Sehlahiswa: T-Display-S3 Pro
• Mofuta: V1.0
• Letsatsi la ho nšoa: 2023.11
• Motlakase: Setšoantšo sa ESP32-S3
• Tikoloho ea Ntlafatso ea Software: Arduino

Litaelo tsa Tšebeliso ea Sehlahisoa

Selelekela

• T-Display-S3 Pro ke sethala sa lisebelisoa bakeng sa ho nts'etsapele lits'ebetso tse sebelisang module ea ESP32-S3 le Arduino.

T-Display-S3 Pro

• T-Display-S3 Pro e etselitsoe ho thusa ntlafatso ea software bakeng sa merero ea hardware.

Arduino

• Arduino ke tikoloho ea nts'etsopele ea software e sebelisetsoang ho hlophisa T-Display-S3 Pro.

Tokisetso

• Pele o qala, etsa bonnete ba hore o na le lisebelisoa tse hlokahalang tsa software tse kentsoeng tsamaisong ea hau.

Qala

• Latela litaelo tse fanoeng bukeng ea mosebelisi ho theha tikoloho ea mantlha ea ntlafatso ea software.

Hlophisa

• Hlophisa litlhophiso ho latela litlhoko tsa projeke ea hau u sebelisa wizate ea tlhophiso e thehiloeng ho menu.

Hokela

• Theha khokahano lipakeng tsa tikoloho ea hau ea nts'etsopele le lisebelisoa tsa T-Display-S3 Pro.

Teko Demo

• Etsa demo ho netefatsa hore hardware le software li sebetsa hantle.

Kenya Sketch

• Kenya khoutu (sekeche) mojuleng oa ESP32-S3 ka ho latela mehato e ka tlase:

Haha le ho Flash

• Kopanya khoutu ea hau ea Arduino 'me u e khantšetse mojuleng oa ESP32-S3.

Hlokomela

• Lekola ts'ebetso ea khoutu ea hau ho lokisa le ho rarolla mathata afe kapa afe.

LBH

Q: Sepheo sa T-Display-S3 Pro ke sefe?

• A: T-Display-S3 Pro e etselitsoe ho thusa basebelisi ho nts'etsapele lits'ebetso ba sebelisa module ea ESP32-S3 mmoho le Arduino.

P: Nka nchafatsa firmware joang mojuleng oa ESP32-S3?

• A: Ho nchafatsa firmware, latela mehato e boletsoeng ho tataiso ea basebelisi tlasa karolo ea "Upload Sketch".

P: A na nka sebelisa libaka tse ling tsa nts'etsopele ea software ka T-Display-S3 Pro?

• A: Tikoloho e khothaletsoang ea nts'etsopele ea software bakeng sa T-Display-S3 Pro ke Arduino, joalo ka ha ho hlalositsoe bukeng ena ea mosebelisi.
• Tokomane ena e reretsoe ho thusa basebelisi ho theha tikoloho ea mantlha ea nts'etsopele ea software bakeng sa ho nts'etsapele lits'ebetso ba sebelisa hardware e thehiloeng ho T-Display-S3 Pro.
• Ka ex e bonoloampLeha ho le joalo, tokomane ena e bontša mokhoa oa ho sebelisa Arduino, ho kenyelletsa le wizate e thehiloeng ho menu, ho bokella Arduino le ho khoasolla firmware ho module ea ESP32-S3.

Lintlha tsa Phatlalatso

• Lintlha tsa tokollo ea Date Version
  • 2023.11 V1.0 Tokollo ea pele.

Selelekela

T-Display-S3 Pro

• T-Display-S3 Pro ke boto ea nts'etsopele. E ka sebetsa ka boikemelo.
• E na le ESP32-S3 MCU e tšehetsang Wi-Fi + BLE protocol ea puisano le motherboard PCB. Skrine ke 2.33-inch IPS LCD.
• Motheong oa mojule ona ke chip ea ESP32S3R8.
• ESP32-S3 e kopanya Wi-Fi (2.4 GHz sehlopha) le tharollo ea Bluetooth 5.0 ho chip e le 'ngoe, hammoho le li-cores tse peli tse sebetsang hantle le lisebelisoa tse ling tse ngata tse fapaneng. E tsamaisoa ke theknoloji ea 40 nm, ESP32-S3 e fana ka sethala se matla, se kopantsoeng haholo ho fihlela litlhoko tse tsoelang pele tsa tšebeliso e nepahetseng ea matla, moralo o kopanetsoeng, ts'ireletso, ts'ebetso e phahameng le ts'epo.
• Xinyuan e fana ka lisebelisoa tsa mantlha tsa hardware le lisebelisoa tsa software tse matlafatsang baetsi ba lits'ebetso ho aha mehopolo ea bona ho potoloha hardware ea ESP32-S3.
• Moralo oa nts'etsopele ea software o fanoeng ke Xinyuan o reretsoe ho nts'etsapele lits'ebetso tsa Internet-of-Things (IoT), tse nang le Wi-Fi, Bluetooth, taolo ea matla e feto-fetohang, le likarolo tse ling tsa sistimi e tsoetseng pele.
• Maqhubu a maqhubu a RF ke 2.402 GHz ho isa ho 2.480 GHz.
• Moetsi oa T-Display-S3 Pro ke Shenzhen Xin Yuan Electronic Technology Co., Ltd.

Arduino

• Sete ea li-software tsa marang-rang tse ngotsoeng ka Java. Arduino Software IDE e nkiloe puong ea ho sebetsa ea Processing le tikolohong e kopanetsoeng ea ntlafatso ea lenaneo la Wiring.
• Basebelisi ba ka nts'etsapele lits'ebetso ho Windows/Linux/MacOS ho latela Arduino. E kgothaletswa ho sebelisa Windows 10. Windows OS e 'nile ea sebelisoa e le example tokomaneng ena ka sepheo sa ho etsa papiso.

Tokisetso

• Ho nts'etsapele lits'ebetso tsa ESP32-S3 o hloka:
• PC e na le sistimi e sebelisang Windows, Linux kapa Mac
• Toolchain ho aha Kopo ea ESP32-S3
• Ha e le hantle Arduino e na le API ea ESP32-S3 le mangolo a ho sebelisa Toolchain
• Boto ea ESP32-S3 ka boeona le thapo ea USB ho e hokahanya le PC

Qala

Khoasolla software ea Arduino

• Mokhoa o potlakileng oa ho kenya Arduino Software (IDE) mecheng ea Windows

Tataiso ea ho Qala ka Potlako

• The websaete e fana ka thupelo ea ho qala kapele
• Windows: https://www.arduino.cc/en/Guide/Windows
• Linux: https://www.arduino.cc/en/Guide/Linux
• Mac OS X: https://www.arduino.cc/en/Guide/MacOSX
• Mehato ea ho kenya Windows platform Arduino
• Kenya sebopeho sa ho jarolla, khetha Windows installer ho kenya ka ho toba

Kenya software ea Arduino

Hlophisa

Khoasolla Git

• Khoasolla sephutheloana sa ho kenya Git.exe

Ho hlophisoa esale pele

• Tobetsa letšoao la Arduino, ebe u tobetsa ka ho le letona ebe u khetha
• Bula foldara moo Khetha hardware ->
• Mouse Tobetsa ka ho le letona->
• Tobetsa Git Bash Mona

Ho kopanya polokelo e hole

• mkdir espressif
• cd espressif
• git clone - e pheta-pheta https://github.com/espressif/arduino-esp32.gitesp32

Hokela

O se o le teng. Ho khona ho tsoela pele, hokela boto ea ESP32-S3 ho PC, hlahloba hore na boto e bonahala tlas'a boto efe, 'me u netefatse hore na puisano ea serial e sebetsa.

Teko Demo

Khetha File>> Example >> WiFi >> WiFiScan

Kenya Sketch

Khetha Boto

Lisebelisoa <

Kenya

Sketch -> Kenya

Serial Monitor

Tools -> Serial Monitor

 SSC Command Reference

• Mona ke tse ling tsa litaelo tse tloaelehileng tsa Wi-Fi hore u leke mojule.

Tlhaloso

• litaelo tsa Op li sebelisoa ho seta le ho botsa mokhoa oa Wi-Fi oa sistimi.

Example

• op -Q
  • mokhoa oa op -S -o

Paramethara

Lethathamo la 6-1. op Taelo Parameter

Paramethara/Tlhaloso

-Q	Botsa mokhoa oa Wi-Fi.
-S	Seta mokhoa oa Wi-Fi.
mokgoa	Ho na le mefuta e 3 ea Wi-Fi: • mokhoa = 1: Mokhoa oa STA • mokhoa = 2: Mokhoa oa AP • mokhoa = 3: Mokhoa oa STA + AP

sta Tlhaloso

• litaelo tsa sta li sebelisetsoa ho hlahloba sebopeho sa marang-rang sa STA, ho hokahanya kapa ho khaola AP, le ho botsa boemo ba ho hokahanya ha STA interface ea marang-rang.

Example

• sta -S [-s ssid] [-b bssid] [-n channel] [-h] sta -Q
• sta -C [-s ssid] [-p password]
• sta -D

Paramethara

Tafole 6-2. sta Command Parameter

Tlhaloso ea Paramethara
-S scan	Lintlha tsa ho fihlella Scan.

-s sid	Skena kapa o hokela Access Points ka ssid.
-b bssid	Skena Lintlha tsa ho kena ka kopo.
-n mocha	Hlakola kanale.
-h	Hlahisa liphetho tsa scan ninete ka ssid Access Points tse patiloeng.
-Q	Bontša stutus ea STA.
-D	E khaotsoe le Libaka tsa Phihlello tsa hajoale.

ap Tlhaloso

• Litaelo tsa AP li sebelisoa ho seta liparamente tsa sebopeho sa marang-rang sa AP.

Example

• ap -S [-s ssid] [-p password] [-t encrypt] [-n channel] [-h] [-m max_sta]
• ap –Q
• ap –L

Paramethara Lethathamo la 6-3. ap Command Parameter

Tlhaloso ea Paramethara

-S	Beha mokhoa oa AP.
-s sid	Seta AP ssid.
-p password	Beha password ea AP.
-t encrypt	Beha mokhoa oa encryption oa AP.
-h	Pata ssid.
-m max_sta	Beha likhokahano tse phahameng tsa AP.
-Q	Hlahisa liparamente tsa AP.
-L	Hlahisa Aterese ea MAC le Aterese ea IP ea seteishene se hokahaneng.

mac Tlhaloso

• Litaelo tsa Mac li sebelisoa ho botsa aterese ea MAC ea sebopeho sa marang-rang.

Example

• mac -Q [-o mode]

Parameter Letlapa la 6-4. mac Command parameter

Tlhaloso ea Paramethara

-Q	Hlahisa aterese ea MAC.
-o mokhoa	• mokhoa = 1: Aterese ea MAC ka mokhoa oa STA. • mode = 2: Aterese ea MAC ka mokhoa oa AP.

Tlhaloso ea DHCP

• dhcp litaelo li sebelisoa ho nolofalletsa kapa ho tima seva/moreki oa DHCP.

Example

• dchp -S [-o mode]
• DHCP -E [-o mokhoa]
• DHCP -Q [-o mode]

Parameter Letlapa la 6-5. DHCP Command parameter

-S	Qala DHCP (Client/Server).
-E	Qetella DHCP (Client/Server).
-Q	bontša boemo ba DHCP.
-o mokhoa	• mokhoa = 1: Motlatsi oa DHCP oa STA interface. • mode = 2: DHCP seva sa AP interface. • mokhoa = 3: bobeli.

Tlhaloso ea IP

• litaelo tsa ip li sebelisetsoa ho beha le ho botsa aterese ea IP ea sebopeho sa marang-rang.

Example

• ip -Q [-o mode]
• ip -S [-i ip] [-o mode] [-m mask] [-g gateway]

Paramethara Lethathamo la 6-6. ip Command Parameter

-Q	Hlahisa aterese ea IP.
-o mokhoa	• mokhoa = 1: Aterese ea IP ea sebopeho sa STA. • mode = 2: IP address ea interface AP. • mokhoa = 3: bobeli
-S	Beha aterese ea IP.
-ke ip	Aterese ea IP.
- maske	Mask a aterese ea subnet.
-g monyako	Tsela ea kamehla.

• qala bocha Tlhaloso
  • reboot taelo e sebelisoa ho qala boto hape.
• Example
  • qala bocha
• RAM
  • taelo ea pheleu e sebelisoa ho botsa boholo ba qubu e setseng tsamaisong.
• Example
  • RAM

FCC Tlhokomeliso

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi,
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.

TLHOKOMELISO EA BOHLOKOA:

Hlokomela: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, tlas'a karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa tlas'a litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Polelo ea Ts'oaetso ea Mahlaseli a FCC:

Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng.

Litokomane / Lisebelisoa

LILYGO T-Display S3 Pro 2.33inch Touch Screen LCD Display WIFI Bluetooth [pdf] Bukana ea Mosebelisi T-Display S3 Pro 2.33inch Touch Screen LCD Display WIFI Bluetooth, T-Display S3, Pro 2.33inch Touch Screen LCD Display WIFI Bluetooth, Screen LCD Display WIFI Bluetooth, Display WIFI Bluetooth, WIFI Bluetooth

Litšupiso

• Bukana ea Mosebelisi