LILYGO T-BEAM-S3 Software

Litlhaloso:

• Lebitso la Sehlahisoa: 7% ($ 06 8VHU *XLGH
• Lisebelisoa tse tšehelitsoeng: Mojule oa ESP32
• Software: $UGXLQR
• Phetolelo: 9

Litaelo tsa Tšebeliso ea Sehlahisoa:

Mabapi le Tataiso ena

Tokomane ena e etselitsoe ho thusa basebelisi ho theha tikoloho ea nts'etsopele ea software bakeng sa lits'ebetso tse sebelisang hardware e thehiloeng ho 7% ($06. E kenyelletsa litaelo tsa ho sebelisa $UGXLQR, ho e hlophisa ka wizate e thehiloeng ho menu, ho hlophisa le ho jarolla firmware ho Setšoantšo sa ESP32

Lintlha tsa Phatlalatso

Letsatsi: [Kenya Letsatsi]

Mofuta: 9

Lintlha tsa tokollo: Tokollo ea pele

Qala

1. Ho qala: Etsa bonnete ba hore likarolo tsohle tse hlokahalang li hokahane hantle.
2. Hokela: Theha khokahano ho Hardware.
3. Lokisa Hardware: Beha li-setting tsa Hardware.
4. Haha le ho Flash: Kopanya le ho khoasolla firmware mojuleng oa ESP32.
5. Hlokomela: Lekola boitšoaro ba sesebelisoa.

SSC Command Reference

1. op: Etsa ts'ebetso.
2. sta: Beha mokhoa oa seteishene.
3. ap: Seta sebaka sa ho kena.
4. Mac: Lokisa aterese ea MAC.
5. dhcp: Lumella DHCP.
6. ip: Beha aterese ea IP.
7. qala hape: Qala sistimi hape.

Lipotso Tse Botsoang Khafetsa (FAQ):

• P: Morero oa tataiso ee ke ofe?
  A: Tataiso ena e thusa basebelisi ho theha tikoloho ea nts'etsopele ea software bakeng sa lits'ebetso tse sebelisang hardware e thehiloeng ho 7%($06 mme e fana ka litaelo tsa ho sebelisa $UGXLQR.
• P: Ke bokella le ho khoasolla firmware mojuleng oa ESP32 joang?
  K: Ho bokella le ho khoasolla firmware, latela mehato e boletsoeng karolong ea "Build and Flash" tlas'a "Qala."

Mabapi le Tataiso ena

Tokomane ena e reretsoe ho thusa basebelisi ho theha tikoloho ea mantlha ea nts'etsopele ea software bakeng sa ho nts'etsapele lits'ebetso ba sebelisa hardware e thehiloeng ho T-BEAM-S3. Ka ex e bonoloampLeha ho le joalo, tokomane ena e bontša mokhoa oa ho sebelisa Arduino, ho kenyelletsa le wizate e thehiloeng ho menu, ho bokella Arduino le firmware download ho module ea ESP32.

Lintlha tsa Phatlalatso

Letsatsi	Phetolelo	Lintlha tsa ho lokolla
2024.04	V1.0	Khutlela pele.

Selelekela

1. T-BEAM-S3
   T-BEAM-S3 ke boto ea ntlafatso. E ka sebetsa ka boikemelo. E na le ESP32-S3 MCU e tšehetsang Wi-Fi + BLE protocol ea puisano le motherboard PCB. Mme sehlahisoa sena se na le boemo ba GPS le ts'ebetso ea LoRa. GPS chip ke Ublox MAX- M10S-00B kapa L76K(Mofuta oa boikhethelo), LoRa chip ke SX1262. Bakeng sa lits'ebetso ho tloha ho marang-rang a sensor ea matla a tlase ho isa mesebetsing e boima haholo. Motheong oa mojule ona ke chip ea ESP32-S3. ESP32-S3 e kopanya Wi-Fi (2.4 GHz sehlopha) le litharollo tsa Bluetooth 5.0 ho chip e le 'ngoe, hammoho le li-cores tse peli tse phahameng le lisebelisoa tse ling tse ngata tse fapaneng. ESP32 e fana ka sethala se matla, se kopantsoeng haholo ho fihlela litlhoko tse tsoelang pele tsa tšebeliso e nepahetseng ea matla, moralo o kopaneng, ts'ireletso. Xinyuan e fana ka lisebelisoa tsa motheo le lisebelisoa tsa software tse matlafatsang baetsi ba lits'ebetso ho aha mehopolo ea bona ho potoloha letoto la lisebelisoa tsa ESP32-S3. Moralo oa nts'etsopele ea software o fanoeng ke Xinyuan o reretsoe ho ntlafatsa ka potlako lits'ebetso tsa Internet- of-Things (loT), tse nang le Wi-Fi, Bluetooth, taolo ea matla e feto-fetohang le likarolo tse ling tsa sistimi e tsoetseng pele. Moetsi ke Shenzhen Xin Yuan Electronic Technology Co., Ltd.
2.  Arduino
   Sete ea li-software tsa marang-rang tse ngotsoeng ka Java. Arduino Software IDE e nkiloe puong ea ho sebetsa ea Processing le tikolohong e kopanetsoeng ea ntlafatso ea lenaneo la Wiring. Basebelisi ba ka nts'etsapele lits'ebetso ho Windows/Linux MacOS e thehiloeng ho Arduino. E kgothaletswa ho sebelisa Windows 10. Windows OS e 'nile ea sebelisoa e le example tokomaneng ena ka sepheo sa ho etsa papiso.
3.  Tokisetso
   Ho nts'etsapele lits'ebetso tsa ESP32-S3 o hloka:

• PC e na le sistimi e sebelisang Windows, Linux kapa Mac
• Toolchain ho aha Kopo ea ESP32-S3
• Arduino eo ha e le hantle e nang le API ea ESP32-S3 le mangolo a ho sebelisa Toolchain
• CH9102 serial port driver
• Boto ea ESP32-S3 ka boeona le thapo ea USB ho e hokahanya le PC

Qala

 Khoasolla software ea Arduino
Mokhoa o potlakileng oa ho kenya Arduino Software (IDE) mecheng ea Windows

1.  Tataiso ea ho Qala ka Potlako
   The websaete e fana ka thupelo ea ho qala kapele
   • Windows:
     https://www.arduino.cc/en/Guide/Windows
   • Linux:
     https://www.arduino.cc/en/Guide/Linux
     Mac OS X: https://www.arduino.cc/en/Guide/MacOSX
2. Mehato ea ho kenya Windows platform Arduino

Kenya sebopeho sa ho jarolla, khetha Windows installer ho kenya ka ho toba

Kenya software ea Arduino

Emela ho kenya

Hlophisa

1.  Khoasolla Git
   • Khoasolla sephutheloana sa ho kenya Git.exe
2.  Ho hlophisoa esale pele
   • Tobetsa letšoao la Arduino, ebe u tobetsa ka ho le letona ebe u khetha "Bula foldara moo"
   • Khetha hardware ->
   • Toeba ** Tobetsa ka ho le letona ** ->
   • Tobetsa Git Bash Mona
3.  Ho kopanya polokelo e hole
   • $ mkdir espressif
   • $ cd espressif
   • $ git clone - e pheta-phetoang https://github.com/espressif/arduino-esp32-git esp32

Hokela

O se o le teng. Ho khona ho tsoela pele, hokela boto ea ESP32-S3 ho PC, hlahloba hore na boto e bonahala tlas'a boto efe 'me u netefatse hore na puisano ea serial e sebetsa.

Teko Demo

Khetha File>> Example >> WiFi >> WiFi Scan

Kenya Sketch

1.  Khetha Boto
   Lisebelisoa <
2.  Kenya
   Sketch < Kenya
3.  SerialMonitor
   Lisebelisoa < Serial Monitor

SSC Command Reference

Mona ke lethathamo la litaelo tse tloaelehileng tsa Wi-Fi hore u leke mojule.

 op

1. Tlhaloso
   litaelo tsa Op li sebelisoa ho seta le ho botsa mokhoa oa Wi-Fi oa sistimi.
2. Example
   
   • op -Q
   • op-S -0 mohlala
     

Paramethara
Lethathamo la 6-1. op Command parameter

-Q	Botsa mokhoa oa Wi-Fi.
-S	Seta mokhoa oa Wi-Fi.
wmode	Ho na le mefuta e 3 ea Wi-Fi: • mokhoa = 1: Mokhoa oa STA • mokhoa = 2: Mokhoa oa AP • mokhoa = 3: Mokhoa oa STA + AP

 sta

1. Tlhaloso
   • Litaelo tsa sta li sebelisetsoa ho hlahloba sebopeho sa marang-rang sa STA, ho hokahanya kapa ho khaola AP, le ho botsa boemo ba ho hokahanya ha STA marang-rang.
2. Example
   
   • sta -S [-s ssid] [-b bssid] [-n channel] [-h]
   • sta -Q sta -C [-s ssid] [-p password]
   • sta -D

Paramethara

Lethathamo la 6-2. sta Command Parameter

-s sid	Skena kapa o hokela Access Points ka ssid.
-b bssid	Sheba lintlha tsa ho fihlella ka bssid.
-n mocha	Hlakola kanale.
-h	Hlahisa liphetho tsa scan ninete ka ssid Access Points tse patiloeng.
-Q	Bontša stutus ea STA.
-D	E khaotsoe le Libaka tsa Phihlello tsa hajoale.

ap

1. Tlhaloso
   
   • ap litaelo li sebelisoa ho seta parameter ea AP network interface.
2. Example
   
   • ap -S [-s ssid] [-p password] [-t encrypt] [-n channel] [-h] [-m max_sta]
   • ap -Q
   • ap -L

Paramethara

Lethathamo la 6-3. ap Command Parameter

-S	Beha mokhoa oa AP.
-s sid	Seta AP ssid.
-p password	Beha password ea AP.
-t encrypt	Beha mokhoa oa encryption oa AP.
-h	Pata ssid.
-m max_sta	Beha likhokahano tse phahameng tsa AP.
-Q	Hlahisa liparamente tsa AP.
-L	Hlahisa Aterese ea MAC le Aterese ea IP ea seteishene se hokahaneng.

Mac

1. Tlhaloso
   • litaelo tsa mac li sebelisetsoa ho botsa aterese ea MAC ea sebopeho sa marang-rang.
2. Example
   • mac -Q [-o mode]

Paramethara
Lethathamo la 6-4. mac Command parameter

-Q	Hlahisa aterese ea MAC.
-o mokhoa	mode = 1: Aterese ea MAC ka mokhoa oa STA.   mode = 2: Aterese ea MAC ka mokhoa oa AP.

dhop

1. Tlhaloso
   • Litaelo tsa dhep li sebelisoa ho nolofalletsa kapa ho tima seva / moreki oa dhop.
2. Example
   
   • ip -Q [-o mode]
   • ip -S [-i ip] [-o mode] [-m mask] [-g gateway]
     

Paramethara
Lethathamo la 6-5. dhcp Command parameter

-S	Qala DHCP (Client/Server).
-E	Qetella DHCP (Client/Server).
-Q	bontša boemo ba DHCP.
-o mokhoa	mode = 1 : Moreki oa DHCP oa sebopeho sa STA.  mode = 2 : Seva ea DHCP ea AP interface.  mokhoa = 3 : bobeli.

IP

1. Tlhaloso
   • p command li sebelisetsoa ho beha le ho botsa aterese ea IP ea sebopeho sa marang-rang.
2. Example
   
   • ip -Q [-o mode]
   • ip -S [-i ip] [-o mode] [-m mask] [-g gateway]

Paramethara
Lethathamo la 6-6. ip Command Parameter

-Q	Hlahisa aterese ea IP.
-o mokhoa	mode = 1 : Aterese ea IP ea sebopeho sa STA.  mode = 2 : Aterese ea IP ea sebopeho sa AP.   mokhoa = 3 : bobeli
-S	Beha aterese ea IP.
-ke ip	Aterese ea IP.
- maske	Mask a aterese ea subnet.
-g monyako	Tsela ea kamehla.

 qala bocha

• Tlhaloso
  • reboot taelo e sebelisoa ho qala boto hape.
• Example
  
  • qala bocha
• RAM
  taelo ea pheleu e sebelisoa ho botsa boholo ba qubu e setseng tsamaisong.
• Example
  • RAM

FCC Tlhokomeliso

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se latela karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le tse latelang
maemo a mabeli:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2.  sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.
TLHOKOMELISO EA BOHLOKOA:

Hlokomela: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Phatlalatso ea Phaello ea Mahlaseli a FCC

Thepa ena e lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng . Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20cm pakeng tsa radiator le 'mele oa hau.

Litokomane / Lisebelisoa

LILYGO T-BEAM-S3 Software [pdf] Bukana ea Mosebelisi 2ASYE-T-BEAM-S3, 2ASYETBEAMS3, T-BEAM-S3 Software, T-BEAM-S3, Software

Litšupiso

• Bukana ea Mosebelisi