dji Matrice 4 Thibelo Sensing Module

Litlhaloso

• Sehlahisoa: DJI Matrice 4 Thibelo Sensing Module
• Tšebelisano: Letoto la DJI Matrice 4D
• Kemiso: H1.5 and H2.5 screws
• Kenyelletso: Dock or Remote Controller
• Sebaka sa ho Lemoha: Varies, caution advised

Ho kenya

Letoto la DJI Matrice 4D

Letoto la DJI Matrice 4

• Make sure to power off the aircraft before attaching or removing the accessories.
• Tighten the screws to ensure secure installation. When installing on the aircraft for long-term use (e.g. when the aircraft is used with the dock), use the included screwdriver to tighten the screws again after installation. Use a paint marker to make a mark and check if the screws are loose.
• Make sure to attach the positioning stickers in the package on the dock cover as shown in the figure when the aircraft is used with the dock. When used with the dock, the obstacle sensing module can be regularly calibrated to maintain optimal performance. Ensure the stickers are firmly attached. Otherwise, calibration of the obstacle sensing module will be affected.
• Remove the protective cover before use. To avoid damaging the module surface, install the protective cover when not in flight. Ensure the cover clips are secure.

Tshebetso

Ha e sebelisoa le boema-kepe:

1. Power on the aircraft and make sure it is linked with the dock.
2. Download and install DJI Enterprise app. https://www.dji.com/downloads/djiapp/dji-enterprise
3. Connect the phone to the USB-C port of the dock electrical cabinet.
4. Launch DJI Enterprise app, an activation prompt will pop up when using the devices for the first time. Follow the on-screen instructions to activate.

Ha e sebelisoa le remote controller:

1. Matla ho remote controller le sefofaneng.
2. Launch DJI Pilot 2 app, an activation prompt will pop up when using the devices for the first time. Follow the on-screen instructions to activate.

Tšebeliso

1. Power on the aircraft, and the obstacle sensing module will be automatically enabled.
2. Ntlafatsa lisebelisoa tsohle ho firmware ea morao-rao.
3. Check the accessory connection status:
   • When used with the dock: Open DJI FlightHub 2 Project page, click > , the module  icon is displayed on the device panel.
   • When used with the remote controller: Run DJI Pilot 2 app, the model of the accessory (LR-01) is displayed on the homepage.
4. Make sure that there are no warning prompts before taking off.
   • The obstacle sensing module has detection blind zones, and the obstacle sensing ability may be limited depending on the obstacle size and material. In the following situations, obstacle sensing may fail. Fly with caution and take manual control if necessary.
   • Flying in special weather conditions such as rain, snow, fog, or dust.
   • Presence of fast-moving objects around the flight route (e.g., operating wind turbines, moving tower cranes, birds in flight, etc.).
   • Presence of thin branches (e.g., flying in dense forests), or dark linear objects with a diameter of less than 12 mm (e.g., thin Ethernet cables, black rubber cables) around the flight route.
   • Presence of oblique power lines when the aircraft is ascending or descending.
   • Presence of strong light interference in the flight direction (e.g., flying towards the sun).
   • The dome surface has water droplet or is severely blocked or blurry.
   • The obstacle is located within the blind spot of the Obstacle Sensing Module.
   • When flying at night, the aircraft cannot bypass obstacles, and can only brake upon obstacle detection.
   • Obstacle avoidance functions are disabled in Attitude mode or in Sport mode.
   • Maintain a flight speed of less than 15 m/s when the obstacle sensing module is in use. And the ascent/descent speed will be limited to no more than 4.5 m/s.
   • Maintain full control of the aircraft at all times and do not rely completely on the module and the app.
   • The obstacle sensing performance can be reduced when operating several accessory-installed aircraft within a short distance from each other. Fly with caution.
   • The product contains precision parts. The product may be damaged or malfunction upon impact. DO NOT drop the product.
   • The aircraft can be stored directly in the carrying case with the accessory installed. When the accessories are not in use, remove them from the aircraft and store them in the carrying case.

Sebaka sa ho Khetholla

Obstacles beyond the detection range cannot be detected. Fly with caution.

Sebaka sa ho Khetholla

Tlhokomelo le Calibration

• Keep the LiDAR dome clean. DO NOT touch it directly with your hands. Regularly clean the dome with a dry cloth. DO NOT use alcohol or other solvents for cleaning.
• When the aircraft is used with the dock, remove the obstacle sensing module and clean the port and the aircraft body every six month.
• Calibrate the obstacle sensing module regularly when prompted to maintain optimal performance.

Firmware Update

If the accessory is installed on the aircraft, the firmware will be updated along with the aircraft firmware.

Ensure that the accessories are connected to the aircraft, and all the devices are fully charged. The update methods are as follows:

• Open the DJI FlightHub 2 Devices page, select the devices and click Can Update to update the firmware all devices together.
• Qala DJI Pilot 2:
  1. Haeba firmware ea sefofane e le mofuta oa morao-rao, tlanya sekhechana sa ntlafatso ea firmware leqepheng la lapeng ho nchafatsa lisebelisoa bakeng sa ho lumellana ha firmware.
  2. Haeba firmware ea sefofane e se mofuta oa morao-rao, tlanya molaetsa oa ntlafatso ea firmware leqepheng la lapeng > Ntlafatsa Tsohle ho nchafatsa lisebelisoa tsohle.

Letoto la DJI Matrice 4D

DJI Matrice 4D Letoto / DJI  Matrice 4D
Ho lefa	Boemo	Ho lefa Boima ba 'mele(g)	Max Hovering Nako(mots)	Max Nako ea Sefofane(mots)
E laoletsoe	/	/	47	54
Thibelo Sensing Module	E lumelletsoe	235	37	40
DJI Matrice 4 Letoto / DJI  Matrice 4
Ho lefa	Boemo	Ho lefa Boima ba 'mele(g)	Max Hovering Nako(mots)	Max Nako ea Sefofane(mots)
Unloaded空	/	/	42	49
Thibelo Sensing Module	E lumelletsoe	237	28	32

RE MONA BAKENG SA WENA

Ikopanye
TŠEHETSO DJI

Litaba tsena li ka fetoha.

https://enterprise.dji.com/dock-3/downloads

Haeba u na le lipotso mabapi le tokomane ena, ka kopo ikopanye le DJI ka ho romella molaetsa ho DocSupport@dji.com.
DJI le MATRICE ke matshwao a kgwebo a DJI.
Copyright © 2025 DJI Litokelo Tsohle li Behiloe.

LBH

• P: Ke tseba joang haeba module ea ho lemoha litšitiso e sebetsa ka nepo?
  A: Ensure the module is powered on, updated to the latest firmware, and there are no warning prompts before takeoff.
• P: A na nka fetola mofuta oa ho lemoha ha mojule oa ho lemoha litšitiso?
  A: No, the detection range is fixed, and flying beyond it may result in undetected obstacles. Exercise caution at all times.

Litokomane / Lisebelisoa

	dji Matrice 4 Thibelo Sensing Module [pdf] Bukana ea Mosebelisi DJI Dock 3, Matrice 4 Obstacle Sensing Module, Matrice 4, Obstacle Sensing Module, Sensing Module, Module
	DJI Matrice 4 Thibelo Sensing Module [pdf] Bukana ea Mosebelisi Matrice 4 Obstacle Sensing Module, Matrice 4, Obstacle Sensing Module, Sensing Module, Module

Litšupiso

• Bukana ea Mosebelisi