Litaba
pata
Beijer ELECTRONICS GT-2734 Digital Output Module
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Mohlala: GT-2734 Digital Output Module
- Doc ID: 73009 2025-02
- 4 tsa digital Liphetho tsa MOS
- Max. voltage: 240 VDC / VAC
- Max. hajoale: 0.5 A
- Theminale mofuta: Clamp
- Terminal e ka tlosoang ka lintlha tse 10
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Netefatsa hore mohloli oa matla o tingoa pele o kenya.
Ho phahamisa
- Hloekisa mojule ka mokhoa o sireletsehileng seporong sa DIN u sebelisa lisebelisoa tse loketseng tsa ho kenya.
Ho kenya li-module tse khethehileng
- Latela litaelo ho kenya li-module tsa GL-9XXX, GT-XXXX, kapa GN-9XXX ha ho hlokahala.
Ho kopanya Lithapo
- Hokela lithapo lebolokong la theminale le ntshuwang ho latela sets'oants'o sa methapo se fanoeng bukeng ea tataiso.
Ho Matlafatsa
- Sebelisa matla a tšimo le likhoele tsa data hantle ho matlafatsa module.
Mabapi le Bukana ena
- Bukana ena e na le lintlha tse mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-2734 Digital Output Module. E fana ka litlhaloso tse tebileng le tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
- Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng ho supa lintlha tse amanang le polokeho kapa lintlha tse ling tsa bohlokoa.
Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELISO: Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe le tšenyo e kholo sehlahisoa.
TLHOKOMELISO: Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA: Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA: Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
- Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
- Leha ho le joalo, Beijer Electronics e ke ke ea ikarabella kapa ea ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa sena.
- Litšoantšo, mohlalaampLits'oants'o le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo.
- Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang.
Litlhoko tse akaretsang tsa polokeho
- TLHOKOMELISO: U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle.
- Qoba ho ama likarolo tsa conductive, Li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
- TLHOKOMELISO: Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
Sistimi e felileview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso.
- Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke e 'ngoe le e' ngoe ea li-module tsa adaptara ea marang-rang tse tsamaellanang, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial, joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
IO Process Data Mapping
- Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramente ea tlhophiso, le lirejistara tsa memori.
- Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
- Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso
- Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso.
- Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa li-adapter tsa netweke le li-programmable IO modules.
- Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500.
- Litokomane tsa module ka 'ngoe li hlalosa data ea parameter.
Litlhaloso
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Tlhaloso e Akaretsang
| Ho felloa ke matla | 80 mA @ 5 VDC |
| Ho felloa ke matla | 80 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho logic: Ho itšehla thajana ha Photocoupler
Matla a lebaleng: Ho se be Boinotšing |
| Matla a tšimo | Matla a lebaleng a fetela mojulung o latelang. Phepelo voltage: 24 VDC lebitso la Moqtagsebaka: 15 - 32 VDC (matla a AC ha a sebelisoe) |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Boima ba 'mele | 58 g |
| Boholo ba module | 12 mm x 99 mm x 70 mm |
| Boima ba 'mele | 58 g |
| Boholo ba module | 12 mm x 99 mm x 70 mm |
Litekanyo
Litekanyo tsa module (mm)
Litlhaloso tsa Sephetho
| Sephetho ka mojule | 4 lintlha, tse peli-directional |
| Lipontšo | 4 boemo ba tlhahiso e tala |
| Lesokoana mofuta | MOS relay (relay ea naha e tiileng) |
| Sephetho voltage range (e itšetlehile ka mojaro) | 240 VAC @ 0.5 A khanyetso
240 VDC @ 0.5 A khanyetso |
| Lesokoana mofuta | MOS relay (relay ea naha e tiileng) |
| Sephetho voltage range (e itšetlehile ka mojaro) | 240 VAC @ 0.5 A khanyetso
240 VDC @ 0.5 A khanyetso |
| Nako ea ho lieha ho tsoa (moroalo o hananang) | Max. AC/DC: 240 V
TIMA ho ON: Max. 0.6 ms ON to OFF: Max. 3 ms |
| Lintlha tse hlahisoang hajoale | Max. 0.5 A / Channel |
| Frequency range (VAC) | 47 - 63 Hz |
| Open-state leakage current | Max. 40A |
| Mofuta o tloaelehileng | Lintlha tse 4 / 2 COM |
| Open-state leakage current | Max. 40A |
| Mofuta o tloaelehileng | Lintlha tse 4 / 2 COM |
Setšoantšo sa Wiring
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Kanale ea tlhahiso 0 |
| 1 | TLHOKOMELISO 0 |
| 0 | Kanale ea tlhahiso 0 |
| 1 | TLHOKOMELISO 0 |
| 2 | Kanale ea tlhahiso 1 |
| 3 | TLHOKOMELISO 1 |
| 4 | Kanale ea tlhahiso 2 |
| 5 | TLHOKOMELISO 2 |
| 6 | Kanale ea tlhahiso 3 |
| 7 | TLHOKOMELISO 3 |
| 8 | E tloaelehileng (matla a tšimo 24 V) |
| 9 | E tloaelehileng (matla a tšimo 0 V) |
| 4 | Kanale ea tlhahiso 2 |
| 5 | TLHOKOMELISO 2 |
| 6 | Kanale ea tlhahiso 3 |
| 7 | TLHOKOMELISO 3 |
| 8 | E tloaelehileng (matla a tšimo 24 V) |
| 9 | E tloaelehileng (matla a tšimo 0 V) |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi/tlhaloso | Mmala oa LED |
| 0 | OUTPUT kanale 0 | Botala |
| 1 | OUTPUT kanale 1 | Botala |
| 2 | OUTPUT kanale 2 | Botala |
| 3 | OUTPUT kanale 3 | Botala |
Boemo ba Channel
| Boemo | LED | E supa |
| Ha ho pontšo | E tima | Ha ho lets'oao la tlhahiso |
| Ka pontsho | Botala | Lets'oao la tlhahiso le fetisoe |
Ho etsa 'mapa oa data ho Tafole ea Litšoantšo
Boleng ba setšoantšo se hlahisoang
| Nonyana e nyane. | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 |
| Monyetla 0 | Reserved | D3 | D2 | D1 | D0 | |||
Lintlha tsa Mojule oa Output
| D3 | D2 | D1 | D0 |
Lintlha tsa parameter
Bolelele bo nepahetseng ba parametha: 2 Byte
| Nonyana e nyane. | Decimal bit | Tlhaloso | Boleng ba kamehla |
| Monyetla 0 | 00-03 | Ketso ea phoso (0-3)
0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
0 (boleng bo fosahetseng) |
| Monyetla 1 | 00-03 | Theko ea phoso (0-3)
0: E timme, 1: Bulela |
0 (e felile) |
Ho hlophisoa ha Hardware
TLHOKOMELO
- Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
- Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series.
- Sekheo se theha sebaka sa moea le ho thibela tšitiso e etsoang ke electromagnetic ho susumetsa ts'ebetso.
- Boemo ba ho instola bo nepahetse ho ea holimo le ka holimo. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
- TLHOKOMELISO: HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
- Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
- TLHOKOMELO Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
- Litaelo tse latelang li sebetsa mefuteng ena ea li-module.
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
- Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
- Namela seporong sa DIN
- Theoha ho tloha seporong sa DIN
Thaba ea GN-9XXX Module
- Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample GN-9251 kapa GN-9371, bona litaelo tse latelang:
- Namela seporong sa DIN
- Theoha ho tloha seporong sa DIN
Mount Removable Terminal Block
- Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.
- Hloma block block e ka ntshuwang
- Theola borokho bo ka ntshuwang
Hokela Lithapo ho Thibelo ea Removable Terminal Block
- Ho hokela/ho hakolla lithapo ho/ho tloha borokhong bo ka ntshuwang (RTB), sheba ditaelo tse ka tlase.
- TLHOKOMELISO: Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
- Hokela thapo
- Hakolla thapo
Matla a Tšimo le Lithako tsa Lintlha
- Puisano pakeng tsa adapter ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / matla a tšimo ea li-module tsa libese, e etsoa ka bese ea ka hare. E na le 2 Field Power Pins le 6 Data Pins.
- TLHOKOMELISO: Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.
| Tšoaea no. | Lebitso | Tlhaloso |
| P1 | Sistimi ea VCC | Phepelo ea sistimi voltage (5 VDC) |
| P2 | Sistimi ea GND | Sebaka sa tsamaiso |
| P3 | Sephetho sa token | Boema-kepe ba token ea module ea processor |
| P4 | Tlhahiso ea serial | Transmitter port port ea module ea processor |
| P5 | Tlhahiso ea serial | Boema-kepe ba ho amohela mojule oa processor |
| P6 | Reserved | E boloketsoe token ea bypass |
| P7 | Tšimong GND | Sebaka sa tšimo |
| P8 | Sebaka sa VCC | Phepelo ea masimong voltage (24 VDC) |
- Liphetho tse 4 tsa dijithale tsa MOS, max. 240 VDC/VAC, 0.5 A, cage clamp, 10 pt removable terminal
Copyright
- © 2025 Beijer Electronics AB. Litokelo tsohle li sirelelitsoe.
- Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso.
- Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena. Beijer Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena.
- Tsohle exampLes tokomaneng ena e reretsoe feela ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa. Beijer Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena e le tsa peleamples li sebelisoa lits'ebetsong tsa 'nete.
- Ka lebaka la mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng.
- Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e lumellana le litlhoko tsohle tse amehang, litekanyetso le melao mabapi le tlhophiso le polokeho.
- Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa ha thepa e boletsoeng tokomaneng ena.
- Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.
- Ntlo-kholo
- Beijer Electronics AB
- Lebokose la 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com
- +4640358600
LBH
- P: Ke lokela ho etsa eng haeba mojule o sa sebetse?
- A: Sheba likhokahano tsa motlakase 'me u netefatse hore lithakhisa tsa motlakase li hokahane hantle.
- P: A na nka fetisa palo e phahameng ka ho fetisisatage le meeli ea hona joale?
- A: Che. Ho feta meeli e boletsoeng ho ka senya module le likarolo tse hokahaneng.
Litokomane / Lisebelisoa
 |
Beijer ELECTRONICS GT-2734 Digital Output Module [pdf] Bukana ea Mosebelisi GT-2734 Digital Output Module, GT-2734, Digital Output Module, Output Module, Module |