DRW160733AC
TS'ELISO TS'OANELO KAROLO
PS LEHLOHONOLO
TAELO MOTSAMAI
Ke leboha haholo ka ho khetha lihlahisoa tsa Autonics.
Bakeng sa polokeho ea hau, ka kopo bala tse latelang pele u li sebelisa.
Mehopolo ea Tšireletseho
※ Ka kopo ela hloko lintlha tsohle tsa polokeho bakeng sa ts'ebetso e sireletsehileng le e nepahetseng ea sehlahisoa ho qoba likotsi.
※ 
letshwao le emela tlhokomeliso ka lebaka la maemo a ikgethang ao ho ona kotsi e ka bang teng.
Tlhokomediso Ho hlōleha ho latela litaelo tsena ho ka baka kotsi e mpe kapa lefu.
Tlhokomeliso Ho hloleha ho latela litaelo tsena ho ka baka kotsi kapa tšenyo ea sehlahisoa.
Tlhokomediso
- Sesebediswa se sa sireletsehang se tlameha ho kenngwa ha o sebedisa yuniti e nang le metjhini e ka bakang kotsi e mpe kapa tahlehelo e kgolo ya moruo. (mohlala, taolo ya matla a nyutlelie, disebediswa tsa bongaka, dikepe, makoloi, diporo, difofane, disebediswa tse tukang, disebediswa tsa polokeho, disebediswa tsa botlokotsebe/thibelo ya dikoduwa, jj.)
Ho hlōleha ho latela taelo ena ho ka fella ka kotsi, kotsi kapa tahlehelo ea moruo. - Se ke oa qhaqha kapa oa fetola yuniti.
Ho hloleha ho latela taelo ena ho ka baka kotsi. - Se ke oa hokela, ho lokisa, kapa ho hlahloba yuniti ha o ntse o hoketsoe mohloling oa motlakase.
Ho hloleha ho latela taelo ena ho ka baka kotsi. - Sheba 'Likhokahano' pele u kenya mohala.
Ho hloleha ho latela taelo ena ho ka baka kotsi.
Tlhokomeliso
- Sebelisa yuniti ka har'a lintlha tse hlophisitsoeng.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa. - Sebelisa lesela le omeletseng ho hloekisa yuniti, 'me u se ke ua sebelisa metsi kapa motsoako oa tlhaho.
Ho hloleha ho latela taelo ena ho ka baka ts'okelo ea motlakase kapa mollo. - Se ke oa sebelisa yuniti sebakeng seo ho nang le khase e tukang, e ka qhomang/e senyang, mongobo, mahlaseli a letsatsi, mocheso o khanyang, thothomelo, tšusumetso, kapa letsoai.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ho phatloha. - U se ke ua fana ka matla ntle le mojaro.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa.
Ho Odara Boitsebiso
Laola Sets'oants'o sa Phallo le Ts'ebetso ea Mojaro
※1: Bakeng sa mofuta oa PS08, ha ho na diode ea zener.
※ Lintlha tse ka holimo li ka fetoha 'me mefuta e meng e ka emisoa ntle le tsebiso.
※ Etsa bonnete ba hore u latela litemoso tse ngotsoeng bukeng ea litaelo le litlhaloso tsa tekheniki (khalori, leqephe la lehae).
Litlhaloso
| Mohlala | PS08-2.5DN PS08-2.5DNU
PS08-2.5DP PS08-2.5DPU PS08-2.5DN2 PS08-2.5DN2U PS08-2.5DP2 PS08-2.5DP2U |
PS12-4DN PS12-4DNU
PS12-4DP PS12-4DPU PS12-4DN2 PS12-4DN2U |
PS50-30DN PS50-30DN2 PS50-30DP PS50-30DP2 | |
| Bohole ba ho lemoha | 2.5 limilimithara | 4 limilimithara | 30 limilimithara | |
| Hysteresis | Max. 20% ea sebaka sa ho utloa | Max. 10% ea sebaka sa ho utloa | ||
| Sepheo se tloaelehileng sa kutlo | 8x8x1mm (Tšepe) | 12x12x1mm (Tšepe) | 90x90x1mm (Tšepe) | |
| Ho beha sebaka | 0 ho isa ho 1.7 mm | 0 ho isa ho 2.8 mm | 0 ho isa ho 21 mm | |
| Phepelo ea motlakase (Operating voltage) | 12-24VDC= (10-30VDC=) | |||
| Tšebeliso ea hona joale | Max. 10mA | |||
| Khafetsa ea likarabo' | 1,000Hz | 1500Hz 150Hz | ||
| Residual voltage | Boholo. 1.5V | |||
| Lerato ka Temp. | Max. ± 10% bakeng sa sebaka sa ho lemoha mocheso oa 20°C | |||
| Laola tlhahiso | Max. 100mA | Max. 200mA | ||
| Insulation resistance | Min. 50M0 (ho 500VDC megger) | |||
| Matla a dielectric | 1,500VAC 50/60Hz bakeng sa motsotso o le mong | |||
| Ho thothomela | 1 limilimithara ampmolumo ka makhetlo a 10 ho isa ho 55Hz ho e 'ngoe le e 'ngoe ea litsela tsa X, Y, Z bakeng sa lihora tse 2 | |||
| Ho tshoha | 500m/s2 (hoo e ka bang 50G) ka X, Y, Z litsela tsa makhetlo a 3 | |||
| Sesupo | Letšoao la ts'ebetso: LED e khubelu | |||
| Tikoloho -etliso | Mocheso oa tikoloho | -25 ho 70°C, Polokelo: -30 ho 80°C | ||
| Mongobo wa tikoloho | 35 ho 95% RH, Polokelo: 35 ho 95% RH | |||
| Tšireletso potoloho | Tšireletso ea polarity e khutlisetsang morao, potoloho ea tšireletso ea Surge, Tšireletso ea Overcurrent | |||
| Sebopeho sa ts'ireletso | IP67 (IEC e tloaelehileng) | |||
| thapo x2 | 02.5mm, 3-terata, lm | 04mm, 3-terata, 2m | 05mm, 3-terata, 2m | |
| AWG28, bophara ba Core: 0.08mm, Palo ea li-cores: 19, bophara ba Insulator: 00.9mm | AWG22, bophara ba Core: 0.08mm, Palo ea li-cores: 60, bophara ba Insulator: 01.25mm | |||
| Lintho tse bonahalang | Taba: Mohala o akaretsang oa Polycarbonate (grey): Polyvinyl chloride (PVC) | Taba: Cable e sa keneleng mocheso ea ABS General (grey): Polyvinyl chloride (PVC) | Taba: Polybutylene terephthalate Cable General (grey): Polyvinyl chloride (PVC) |
|
| Kamohelo |
|
|||
| Boima ba 'melex3 | Approx. 30g (hoo e ka bang 16g) | Approx. 77g (hoo e ka bang 62g) | Approx. 265g (hoo e ka bang 220g) | |
※1: Maqhubu a karabo ke boleng bo tloaelehileng. Tekanyetso e tloaelehileng ea kutlo e sebelisoa 'me bophara bo behiloe joalo ka linako tse 2 tsa sepheo se tloaelehileng sa kutlo, 1/2 ea sebaka sa ho utloa bakeng sa bohole.
※2: Se ke oa hula thapo ea Ø4mm ka matla a 30N kapa ho feta le thapo ea Ø5mm e nang le matla a 50N kapa ho feta.
E ka baka mollo ka lebaka la terata e robehileng. Ha u atolosa terata, sebelisa thapo ea AWG22 kapa ka holimo ho 200m.
※3: Boima bo kenyelletsa ho paka. Boima bo masakaneng ba yuniti feela.
※ Tikoloho e hanyetsanoa e lekantsoe ka mokhoa o sa hatseheng kapa oa ho koaleha.
Litekanyo
Tšitiso e Kopanetsoeng le Tšusumetso ka Litšepe Tse Potolohileng
- Ho kena-kenana
Ha li-sensor tse haufi le bongata li kentsoe moleng o haufi, ho se sebetse hantle ha sensor ho ka bakoa ke ho kena-kenana.
Ka hona, etsa bonnete ba ho fana ka sebaka se fokolang lipakeng tsa li-sensor tse peli, joalo ka lichate tse ka tlase.
(yuniti: mm)
- Tšusumetso ea litšepe tse potolohileng
Ha li-sensor li kentsoe holim'a tšepe ea tšepe, li-sensor li tlameha ho thibeloa ho angoa ke ntho efe kapa efe ea tšepe ntle le sepheo.
Ka hona, etsa bonnete ba ho fana ka sebaka se fokolang joalo ka setšoantšo se nepahetseng.
Ho beha sebaka
- Sebaka sa ho lemoha se ka fetoloa ka sebopeho, boholo kapa thepa ea sepheo.
Ka hona, ka kopo, sheba sebaka sa kutlo joalo ka (a), ebe u fetisa sepheo ka har'a sebaka sa ho seta (Sa). - Setting distance(Sa)= Sehole sa kutlo(Sn) × 70% Mohlala)PS50-30DN
Ho beha sebaka(Sa)= 30mm × 0.7 = 21mm
Tlhokomeliso nakong ea Tšebeliso
- Latela litaelo ho 'Litemoso nakong ea Tšebeliso'. Ho seng joalo, e ka baka likotsi tse sa lebelloang.
- 12-24VDC phepelo ea motlakase e lokela ho ba insulated le matla a fokolangtage/hona joale kapa Sehlopha sa 2, SELV sesebelisoa sa phepelo ea motlakase.
- Sebelisa sehlahisoa, ka mor'a metsotsoana e 0.8 ea ho fana ka matla.
- Khoele e khuts'oane ka hohle kamoo ho ka khonehang 'me u lule hole le molumo o phahamengtaglithapo tsa e kapa lithapo tsa motlakase, ho thibela ho phahama le lerata le kenang.
Se ke oa sebelisa haufi le sesebelisoa se hlahisang matla a matla a makenete kapa lerata le phahameng la maqhubu (transceiver, jj.).
Haeba u kenya sehlahisoa haufi le lisebelisoa tse hlahisang matla a matla (mochine, mochini oa welding, joalo-joalo), sebelisa diode kapa varistor ho tlosa surge. - Sehlopha sena se ka sebelisoa maemong a latelang.
① Ka tlung (boemong ba tikoloho e kentsoe 'Specification')
② Altitude max. 2,000m
③ Tekanyo ea tšilafalo ea 2
④ Sehlopha sa ho kenya II
Lihlahisoa tse kholo
- Lisebelisoa tsa Photoelectric
- Li-Sensors tsa Fiber Optic
- Menyako ea Menyako
- Li-Sensors tsa Monyako
- Li-Sensors tsa Sebaka
- Li-Sensors tsa Proximity
- Li-Sensors tsa Khatello
- Li-Encoders tsa Rotary
- Lihokelo/ Sokete
- Phepelo ea Power Mode
- Lisebelisoa tsa ho laola / Lamps / Buzzers
- Li-block le li-cable tsa I / O
- Stepper Motors / Bakhanni / Batsamaisi ba Motion
- Litšoantšo tsa Graphic / Logic
- Lisebelisoa tsa Field Network
- Laser Marking System (Fiber, Co₂, Nd: YAG)
- Laser Welding / Cutting System
- Balaoli ba Mocheso
- Li-transducers tsa mocheso/Mongobo
- SSRs/Balaoli ba Matla
- Libali
- Lisebelisoa tsa nako
- Limithara tsa Panel
- Limithara tsa Tachometers/Pulse (Rate).
- Diyuniti tsa Pontsho
- Li-Sensor Controllers
Mokhatlo
http://www.autonics.com
HEADQUARTERS:
18, Bansong-ro 513 beon-gil, Haeundae-gu, Busan,
Korea Boroa, 48002
MOELE: 82-51-519-3232
E-mail: thekiso@autonics.com
DRW160733AC
Litokomane / Lisebelisoa
 |
Autonics PS08 Inductive Proximity Sensor [pdf] Buka ea Taelo PS08, PS12, PS50, PS08 Inductive Proximity Sensor, Inductive Proximity Sensor, Proximity Sensor, Sensor |
 |
Autonics PS08 Inductive Proximity Sensor [pdf] Bukana ea Mosebelisi PS08 Inductive Proximity Sensor, PS08, Inductive Proximity Sensor, Proximity Sensor, Sensor |
 |
Autonics PS08 Inductive Proximity Sensor [pdf] Buka ea Taelo PS08 Inductive Proximity Sensor, PS08, Inductive Proximity Sensor, Proximity Sensor, Sensor |
 |
Autonics PS08 Inductive Proximity Sensor [pdf] Buka ea Taelo PS08 Inductive Proximity Sensor, PS08, Inductive Proximity Sensor, Proximity Sensor, Sensor |