GravaStar Mercury K1 75% Wireless Mechanical Keyboard User Manual

1. Selelekela

Thank you for choosing the GravaStar Mercury K1 75% Wireless Mechanical Keyboard. This manual provides essential information for setting up, operating, and maintaining your new keyboard. Please read it thoroughly to ensure optimal performance and longevity of your device.

2. Likahare tsa Sephutheloana

• GravaStar Mercury K1 75% Wireless Mechanical Keyboard
• Cable ea USB-C
• 2.4GHz Wireless Dongle
• Sesebelisoa sa Keycap
• Fetola Puller
• Ho hloekisa Brush
• Sample Switches × 4 (for testing different switch types)
• Bukana ea Mosebelisi

3. Seta

3.1 Ho tjhaja Keyboard

Before initial use, fully charge the keyboard using the provided USB-C cable. Connect the USB-C end to the keyboard and the USB-A end to a power source (e.g., computer USB port, wall adapter). The keyboard features an 8000mAh rechargeable battery, providing extended usage time.

3.2 Tri-Mode Connectivity

The Mercury K1 supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. Use the switch located on the back of the keyboard to select your desired mode.

Setšoantšo: Ka morao view of the GravaStar Mercury K1 keyboard highlighting the triple connection modes and switches.

Kgokelo e se nang mohala ya 3.2.1 2.4GHz

1. Locate the 2.4GHz wireless dongle stored in the keyboard's underside.
2. Hokela dongle koung ea USB e fumanehang komporong ea hau.
3. Switch the keyboard to 2.4GHz mode using the selector switch. The keyboard will automatically connect.

3.2.2 Khokahano ea Bluetooth 5.0

1. Switch the keyboard to Bluetooth mode using the selector switch.
2. On your device (PC, laptop, tablet), enable Bluetooth and search for new devices.
3. Select "GravaStar Mercury K1" from the list of available devices to pair.

3.2.3 Wired USB-C Connection

1. Hokela thapo ea USB-C e fanoeng koung ea USB-C ea keyboard.
2. Connect the other end of the cable to your computer's USB port.
3. The keyboard will automatically switch to wired mode and begin charging.

3.3 Ho Tsamaellana ha Sistimi

The Mercury K1 is compatible with both Windows and Mac operating systems. Use the dedicated switch on the keyboard to select the appropriate layout for your system.

3.4 Ergonomic Kickstands

Adjust the keyboard's typing angle using the two-layer ergonomic kickstands located on the underside for enhanced comfort during extended use.

4. Litaelo tsa Ts'ebetso

4.1 Mesebetsi ea Bohlokoa ea Motheo

The Mercury K1 features a compact 75% layout with 79 keys, designed to maximize desk space while retaining essential functionality. Standard QWERTY layout is provided.

4.2 Moqolo oa Moqolo

A multi-function rotary knob is located on the upper right of the keyboard. Rotate it to adjust volume or media settings. Pressing the knob typically mutes/unmutes audio.

4.3 RGB Lighting Control

The keyboard features dual independent RGB systems with 16.8 million colors, 11 preset effects, 10 sound-reactive modes, and 13 fully customizable settings. Use the following key combinations to control the lighting:

Image: The GravaStar Mercury K1 showcasing litlamorao tsa eona tsa mabone tsa RGB tse ka khonehang.

• Fn + R Shift: Cycle Side Light Modes
• Fn + < or >: Cycle Side Light Brightness Levels
• Fn + / or ?: Switch Side Light Colors
• Fn + , or .: Cycle Side Light Speed Settings
• Fn + |: Cycle Backlight Modes
• Fn + Tab: Switch Backlight Colors
• Fn + ← or →: Fetola Lebelo la Backlight
• Fn + ↑ or ↓: Fetola Khanya ea Backlight

4.4 Li-switch tse Chesang tse Fetohang

The Mercury K1 features hot-swappable switches, allowing for easy replacement without soldering. This enables customization of key feel and acoustics to suit personal preferences.

Setšoantšo: Ho phatloha view of a GravaStar Stellar Bloom Linear Switch, detailing its components.

5. Tlhokomelo

5.1 Ho hloekisa

Regularly clean your keyboard using the provided cleaning brush to remove dust and debris from between the keycaps. For deeper cleaning, use the keycap puller to remove keycaps and gently wipe the surface with a soft, damp cloth. Ensure the keyboard is powered off and disconnected before cleaning.

5.2 Phetolo ea Switch

To replace a switch, use the switch puller to carefully remove the existing switch. Align the pins of the new switch with the holes on the PCB and press firmly until it clicks into place. Ensure the switch is properly seated to avoid damage.

6. Ho rarolla mathata

• Keyboard ha e arabe: Ensure the keyboard is charged and powered on. Check the connection mode (wired, 2.4GHz, Bluetooth) and ensure it matches your device. For wireless connections, verify the dongle is properly inserted or Bluetooth is paired.
• Lag or disconnections in wireless mode: Move the keyboard closer to your device or 2.4GHz dongle. Avoid interference from other wireless devices. Ensure the keyboard battery is sufficiently charged.
• Mabone a RGB ha a sebetse: Check the lighting control key combinations (Fn + keys) to ensure it's not turned off or set to a very dim setting. Ensure the keyboard is powered on.
• Linotlolo tse sa ngolisoeng: If specific keys are not working, try removing and re-inserting the switch using the switch puller. If the issue persists, the switch may need replacement.

7. Litlhaloso

8. Warranty & Ts'ehetso

8.1 Boitsebiso ba Tiisetso

The GravaStar Mercury K1 keyboard comes with a 1-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

8.2 Tšehetso ea Bareki

For technical assistance, warranty claims, or general inquiries, please visit the official GravaStar website or contact their customer support team. Contact information can typically be found on the product packaging or the official websebaka.

9. Livideo tsa Sehlahisoa sa Semmuso