LIORQUE Wireless Weather Station YGH6208 User Manual

Selelekela

Thank you for choosing the LIORQUE Wireless Weather Station YGH6208. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, and features a DCF radio-controlled clock with alarm functions. This manual will guide you through the setup, operation, and maintenance of your weather station.

Litaba tsa Sephutheloana

1 x LIORQUE Wireless Weather Station (Main Unit)
1 x Sensor ea kantle
3 x AAA Batteries (for Main Unit)
2 x AAA Batteries (for Outdoor Sensor)
1 x Buka ea Mosebelisi (tokomane ena)

Sehlahisoa se Felletseview

Setšoantšo sa 1: LIORQUE Wireless Weather Station Main Unit. This image shows the front view of the main display unit, highlighting its LCD screen and compact design.

Likarolo tse ka sehloohong tsa Yuniti:

4.3-inch LCD screen with backlight
Pontšo ea mocheso le mongobo ka tlung
Pontšo ea mocheso ea kantle le mongobo
Matšoao a bolepi ba leholimo
DCF radio-controlled clock with manual setting option
Double alarm clock with snooze function
Calendar and day of the week display (7 languages)
Max/Min temperature and humidity records
Air pressure display and weather trend
Pontšo ea nako ea 12/24

Likarolo tsa Sensor ea Kantle:

Wireless transmission up to 100m (open area)
Tekanyo ea mocheso le mongobo
Supports hanging or standing placement
Data updated every 30 seconds
Supports up to 3 sensors (one included)

Tlhophiso

1. Ho kenya Battery

Sensora ea Kantle: Open the battery compartment cover on the back of the outdoor sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
Yuniti e kholo: Open the battery compartment cover on the back of the main unit. Insert 3 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
The main unit will power on and display indoor readings.

2. Sensor pairing

After installing batteries in both units, the main unit will automatically search for the outdoor sensor. The outdoor temperature and humidity should appear on the main unit's display within a few minutes. If the outdoor readings do not appear:

Ensure both units are within range (up to 100m in open air).
Press the "TX" button inside the outdoor sensor's battery compartment to manually send a signal.
On the main unit, press and hold the "CHANNEL" button to initiate a manual search for the sensor.

3. Litlhophiso tsa Qalong (Nako, Letsatsi, Liyuniti)

The weather station will attempt to synchronize with the DCF radio signal for automatic time setting. This may take several hours, especially in areas with weak signals. You can manually set the time and date if needed.

Tlhophiso ea nako ka letsoho: Press and hold the "MODE" button to enter time setting mode. Use the "UP" and "DOWN" buttons to adjust values and "MODE" to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day, language for day of week).
Diyuniti tsa Mocheso: Press the "°C/°F" button to switch between Celsius and Fahrenheit.
Air Pressure Units: Press the "BARO" button to cycle through air pressure units (e.g., hPa, inHg).

Litaelo tsa Ts'ebetso

Bontša Boitsebiso

The 4.3-inch LCD screen displays various information:

Nako le Letsatsi: Nako ea hona joale, letsatsi le letsatsi la beke.
Indoor Readings: Current indoor temperature and humidity.
Outdoor Readings: Current outdoor temperature and humidity from the connected sensor.
Meteo Weather: Icons indicating predicted weather conditions (e.g., sunny, cloudy, rainy).
Khatello ea Moea: Current atmospheric pressure and trend.
Lebone le ka morao: The screen backlight activates with a light touch and returns to normal brightness after 10 seconds to conserve battery.

Mosebetsi oa Alamo Clock

The weather station features a double alarm clock with snooze.

Ho Hlophisa Lialamo: Press the "ALARM" button to view Alarm 1. Press "ALARM" again to view Alarm 2. Hold "ALARM" to enter alarm setting mode. Use "UP" and "DOWN" to adjust the hour and minute, and "ALARM" to confirm.
Ho kenya/ho tima dialamo: Leha ho le joalo viewing an alarm, press "UP" to toggle it on or off. An alarm icon will appear when active.
Mosebetsi: When an alarm sounds, press any button (except "ALARM OFF") to activate snooze. The alarm will sound again after a set interval. Press "ALARM OFF" to stop the alarm completely.

Boholo le Bonyane ba Lirekoto

The weather station records the maximum and minimum indoor/outdoor temperature and humidity values.

Press the "MAX/MIN" button once to display maximum recorded values.
Press "MAX/MIN" again to display minimum recorded values.
Press "MAX/MIN" a third time to return to current readings.
To clear records, hold the "MAX/MIN" button while viewho boloka litlaleho.

Tlhokomelo

Phetoho ea Betri: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time.
Ho hloekisa: Clean the display and unit surfaces with a soft, damp lesela. Se ke oa sebelisa li-abrasive cleaners kapa solvents.
Ho beoa ha Sensor ka ntle: For optimal performance and longevity, install the outdoor sensor in a shaded area, protected from direct sunlight and rain. Ensure it is within the 100m wireless range of the main unit.

Ho batle phoso

Bothata	Tharollo e ka khonehang
No outdoor temperature/humidity display.	Check if batteries are correctly installed in the outdoor sensor. Press the "TX" button on the outdoor sensor. Press and hold the "CHANNEL" button on the main unit to re-establish connection. Ensure the sensor is within range and not blocked by thick walls or metal objects.
Incorrect time display.	Wait for DCF signal synchronization (can take several hours). Manually set the time (refer to "Initial Settings" section). Ensure the main unit is not near sources of interference (e.g., TVs, computers).
Pontšo e lerootho kapa ha e na letho.	Replace batteries in the main unit. Netefatsa hore libeteri li kentsoe ka polarity e nepahetseng.
Ponelopele ea boemo ba leholimo e bonahala e sa nepahala.	The weather forecast is based on atmospheric pressure changes and is an estimation. It may not always match local weather services. Allow 7-14 days for the station to learn local pressure patterns for more accurate forecasts.

Litlhaloso

Mohlala: EA-6208
Lebitso: LIORQUE
Mofuta oa Pontšo: LCD
Mohloli oa Motlakase (Yuniti e ka Sehloohong): 3 x AAA libeteri (tse kenyelelitsoe)
Power Source (Outdoor Sensor): 2 x AAA libeteri (tse kenyelelitsoe)
Wireless Range: Ho fihla ho 100m (sebaka se bulehileng)
Nepahalo ea Mocheso: ±0.5 °C
Theknoloji ea Sensor: Funk (Wireless)
Likarolo tse Khethehileng: DCF Radio Clock, Alarm, Snooze, Weather Forecast, Max/Min Records, Backlight
Likarolo tse Kenyelelitsoeng: Weather Station Main Unit, Outdoor Sensor

Warranty le Tšehetso

LIORQUE products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LIORQUE websebaka. Ka kopo, boloka bopaki ba theko ea hau bakeng sa likopo tsa waranti.

LIORQUE YGH6208