uwant D700 Wet Dry Vacuum Cleaner Instruction Manual

1. Litaelo tsa Bohlokoa tsa Tšireletso

Please read all safety instructions carefully before using the uwant D700 Wet Dry Vacuum Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on commercial surfaces.
• Se ke oa qoelisa sesebelisoa ka metsing kapa marong a mang.
• Beha moriri, liaparo tse hlephileng, menoana le likarolo tsohle tsa 'mele hole le libaka tse bulehileng le tse tsamaeang.
• Use only uwant recommended attachments and accessories.
• Se sebelise ho thonaka maro a tukang kapa a chang, joalo ka peterole, kapa oa sebelisa libakeng tseo e kanna ea ba teng.
• U se ke ua nka ntho leha e le efe e tukang kapa e tsubang, e kang lisakerete, lichelete kapa molora o chesang.
• Always turn off the appliance before connecting or disconnecting the brush roll or other accessories.
• Boloka sesebelisoa ka tlung sebakeng se omileng.

2. Sehlahisoa Overview

The uwant D700 is a versatile wet dry vacuum cleaner designed for efficient cleaning of various floor types. It features advanced technologies for superior performance and ease of use.

Figure 2.1: uwant D700 Wet Dry Vacuum Cleaner main unit.

Likarolo tsa Bohlokoa:

• Intelligent Stain Detection: Automatically adjusts suction and water flow based on dirt level.
• Moralo o bataletseng oa 180°: Allows cleaning under low furniture with ease.
• 2mm Edge Cleaning: D-shaped brush head ensures thorough cleaning along edges and corners.
• Push-in Self-Cleaning Station: Automated 100°C hot water wash and 75°C hot air drying for the brush roll.
• Electrolyzed Water Sterilization: Generates electrolyzed water to eliminate 99.99% of germs without chemical disinfectants.
• 20,000 Pa Suction Power: Powerful suction for both wet and dry messes.
• Bophelo bo Bolelele ba Battery: Up to 45 minutes of runtime for cleaning areas up to 300 m².

Figure 2.2: The D-shaped rotating brush offers a 6 times wider cleaning surface and 0mm edge cleaning on 3 sides.

3. Seta

3.1 Ho phutholla le ho Kopanya

Carefully remove all components from the packaging. Ensure all parts are present before assembly.

1. Kenya mofeng karolong e kholo ea vacuum cleaner ho fihlela e tobetsa hantle sebakeng sa eona.
2. Place the clean water tank and dirty water tank into their respective compartments.
3. Ensure the brush roll is correctly installed in the brush head.

Figure 3.1: Illustration of the assembly process, showing components being connected.

3.2 Tefiso ea Pele

Pele o sebedisa ka lekgetlo la pele, tjhaja sesebediswa sa ho hlwekisa ka botlalo.

1. Place the vacuum cleaner onto the self-cleaning station. The station is designed for easy push-in docking.
2. Connect the power adapter to the charging port on the station and plug it into a wall outlet.
3. The display will indicate charging status. A full charge typically takes approximately 4-5 hours.

Figure 3.2: The vacuum cleaner easily docks into its station with a single movement for charging and self-cleaning.

3.3 Ho Tlatsa Tanka ea Metsi a Hloekileng

The clean water tank supplies water for cleaning. For optimal performance, use tap water.

1. Tlosa tanka ea metsi a hloekileng ho tsoa yuniti e kholo.
2. Open the tank cap and fill with clean tap water up to the MAX line.
3. Close the cap securely and reinsert the tank into the vacuum cleaner.

Figure 3.3: Filling the clean water tank with tap water.

4. Litaelo tsa Ts'ebetso

4.1 Ho Matlafatsa/Ho tima le ho Khetha Mokhoa

Press the power button on the handle to turn the vacuum cleaner on or off. Use the mode button to switch between cleaning modes.

• Mokhoa oa Smart: The vacuum automatically detects dirt levels and adjusts suction power and water flow. Ideal for general cleaning.
• Powerful Mode: Provides maximum suction and water flow for heavily soiled areas.
• Mokhoa o omileng: Suction only, suitable for picking up dry debris without water.

Figure 4.1: The intelligent dirt detection system automatically adjusts suction and water flow for different stain levels.

4.2 Cleaning Techniques

For best results, move the vacuum cleaner slowly forward and backward over the area to be cleaned.

• Under Low Furniture: Utilize the 180° flat design by tilting the vacuum cleaner back to reach under sofas, beds, and other low-clearance areas.
• Ho hloekisa Edge: The D-shaped brush head is designed to clean within 2mm of edges, ensuring no spots are missed. Guide the vacuum along baseboards and furniture edges.
• Electrolyzed Water Function: The D700 automatically generates electrolyzed water for sterilization during cleaning. No additional disinfectants are needed.

Figure 4.2: The 180° flat design allows easy cleaning under low furniture and in tight corners.

Figure 4.3: The D-shaped rotating brush provides superior edge cleaning, reaching within 2mm of walls.

5. Tlhokomelo

Regular maintenance ensures optimal performance and extends the lifespan of your uwant D700.

5.1 Self-Cleaning Cycle

After each use, it is recommended to run the self-cleaning cycle.

1. Place the vacuum cleaner on the self-cleaning station.
2. Press the self-clean button on the handle or station.
3. The station will perform a 100°C hot water wash of the brush roll, followed by 75°C hot air drying. This process helps prevent odors and bacterial growth.

Figure 5.1: The self-cleaning station performs a 100°C hot water wash and 75°C hot air drying for thorough brush maintenance.

Figure 5.2: The ultra-silent high-temperature drying chamber ensures quick and quiet drying of the brush roll.

5.2 Ho tšolla le ho hloekisa tanka ea metsi a litšila

Empty the dirty water tank after each use to prevent odors and maintain hygiene.

1. Tlosa tanka ea metsi a litšila karolong e kholo.
2. Bula sekoahelo sa tanka 'me u tšolle metsi le lithōle tse litšila ka hloko.
3. Rinse the tank thoroughly with clean water. You can use the innovative deodorizing device to neutralize odors.
4. Lumella tanka hore e omelle ka ho feletseng pele u e kenya hape.

Figure 5.3: The innovative deodorizing device helps eliminate unpleasant odors from the dirty water tank.

5.3 Cleaning the Brush Roll and Filter

Even with self-cleaning, occasional manual cleaning of the brush roll and filter is recommended.

1. Turn off the vacuum cleaner and remove the brush roll cover.
2. Remove the brush roll. Rinse it under running water to remove any tangled hair or debris. The brush roll is IPX6 waterproof.
3. Remove the HEPA filter from the dirty water tank. Tap it gently to remove dust or rinse it if heavily soiled. Ensure it is completely dry before reinstallation.
4. Kopanya likarolo tsohle hape hang ha li omme.

Figure 5.4: The IPX6 waterproof rotating brush can be easily rinsed for deep cleaning.

6. Ho rarolla mathata

If you encounter any issues with your uwant D700, please refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact uwant customer support for assistance.

7. Litlhaloso

8. Tiisetso le Tšehetso

The uwant D700 Wet Dry Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact uwant customer service. Contact information can typically be found on the official uwant websetsheng kapa sephuthelong sa sehlahiswa.

Please have your model number (D700) and purchase date ready when contacting support.