1. Selelekela
This manual provides detailed instructions for the installation, operation, and maintenance of your CINOTON 26W LED Wall Pack Light. Please read this manual thoroughly before installation and retain it for future reference.
Figure 1.1: CINOTON 26W LED Wall Pack Lights (6-Pack)
This image displays six individual CINOTON 26W LED Wall Pack Lights, showcasing their design and form factor. Each light features a dark grey top housing with a clear, ribbed lens, and a visible photocell sensor on the top surface.
2. Boitsebiso ba Tšireletseho
Always follow basic safety precautions when installing or servicing electrical equipment to reduce the risk of fire, electric shock, or injury to persons.
- Ensure the power supply is disconnected before installation, inspection, or removal.
- Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local code requirements.
- Do not install on surfaces that are not structurally sound.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
3. Sehlahisoa Overview
The CINOTON 26W LED Wall Pack Light is designed for outdoor security and flood lighting applications, featuring a durable construction and an integrated dusk-to-dawn sensor.
3.1 Likarolo tsa Bohlokoa
- Automated Dusk-to-Dawn Functionality: The integrated photocell sensor automatically turns the light ON at sundown/night and OFF at sunrise/daytime.
- Matla a Matla: Consumes only 26W, providing illumination equivalent to 150-250W metal halide and high-pressure sodium fixtures.
- Khanya e Phahameng: Equipped with 30 LED bulbs, delivering 3000 lumens of 5000K Daylight illumination.
- Kaho e Ts'oarellang: Features a die-cast aluminum housing with a clear lens, offering anti-corrosion and IP65 waterproof protection.
- Nako e telele ea Bophelo: Rated for 50,000 hours of operation.
- Vol. Voltage Tšebelisano: E tšehetsa voltage from 100-277Vac, compatible with standard 110Vac systems.
Figure 3.1: Dusk to Dawn Sensor Operation
This diagram illustrates the automatic operation of the dusk-to-dawn sensor. It shows the light turning off during the day (sunrise) and turning on at night (sundown), with an icon indicating a 50,000-hour lifespan and a photocell sensor.
Figure 3.2: All Weather Resistance
This image highlights the weather-resistant properties of the light, including IP65 waterproof rating, frost resistance (down to -4°F), and storm resistance, depicted with icons for rain, snowflake, and wind.
Setšoantšo sa 3.3: Litekanyo tsa Lihlahisoa
This image provides the physical dimensions of the wall pack light: 6.0 inches in length, 9.1 inches in height, and 3.6 inches in width.
4. Litlhaloso
| Tšobotsi | Boleng |
|---|---|
| Setaele sa Mohlala | 26W LED Wall Pack Light 6 Pack |
| ASIN | B0FCMBWDVH |
| Tšebeliso ea Matla | 26W |
| Flux e khanyang | 3000 Lumens |
| Mocheso oa Mobala | 5000K (Motšehare) |
| Keletso Voltage | 100-277Vac |
| Bolele ba bophelo | Lihora tse 50,000 |
| Lintlha tse sa keneleng metsi | IP65 |
| Litekanyo (L x H x W) | 6.0 x 9.1 x 3.6 lisenthimithara |
| Equivalent to HID/HPS | 150-250W |
5. Ho seta le ho kenya
Follow these steps carefully for proper installation of your wall pack light. Ensure power is OFF before beginning.
5.1 Setšoantšo sa Wiring
The fixture uses a standard 3-wire connection: Hot, Common/Neutral, and Ground.
Figure 5.1: Two Wire Layout Options
This image illustrates two wiring layout options: an interior wire layout showing the connection to a junction box with exposed wires (black, white, green), and an external wire layout showing the light mounted on a brick wall with conduit for wiring.
5.2 Mehato ea ho kenya
Refer to the following steps and the accompanying image for a visual guide.
- Tlosa lense: Remove the two screws securing the lens to the rear housing and set the lens aside.
- Loosen reflector screws: Loosen the two screws enough to allow the reflector to slide upward until the keyhole reflector releases from the screws. Remove the reflector.
- Prepare mounting holes: Knock out appropriate holes in the rear housing and fasten it to the outlet box or wall using the gasket.
- Complete wiring: Connect the fixture's wires to the power source (Hot, Common/Neutral) and ground according to local electrical codes.
- Install reflector: Reinstall the reflector by aligning it with the screws and tightening them.
- Install the lens: Reattach the lens to the housing using the two screws removed in step 1.
Figure 5.2: Easy Installation Steps
This image displays a six-panel step-by-step guide for installing the wall pack light. It shows removing the lens, loosening reflector screws, knocking out mounting holes, completing wiring, installing the reflector, and finally installing the lens.
6. Litaelo tsa Ts'ebetso
Once properly installed and powered, the CINOTON 26W LED Wall Pack Light operates automatically.
- The integrated photocell sensor detects ambient light levels.
- When the ambient light falls below a certain threshold (e.g., at dusk), the light will automatically turn ON.
- When the ambient light rises above a certain threshold (e.g., at dawn), the light will automatically turn OFF.
- Ha ho hlokahale thuso ea matsoho bakeng sa ts'ebetso ea letsatsi le letsatsi.
7. Tlhokomelo
The CINOTON 26W LED Wall Pack Light is designed for minimal maintenance due to its durable construction and IP65 rating.
- Ho hloekisa: Periodically clean the lens with a soft, damp cloth to ensure optimal light output and sensor performance. Do not use abrasive cleaners or solvents.
- Tlhahlobo: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure mounting screws remain tight.
- Ha ho na Likarolo tse ka Sebetsang: The LED module and driver are integrated and not user-serviceable. Do not attempt to open or repair the internal components.
8. Ho rarolla mathata
If you encounter issues with your wall pack light, refer to the following common problems and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Light does not turn ON at night. | No power supply; Faulty photocell; External light source interfering with sensor. | Check circuit breaker and wiring connections. Ensure photocell is not obstructed or receiving light from another source (e.g., street light, window light). |
| Light stays ON during the day. | Photocell obstructed or dirty; Faulty photocell. | Clean the photocell sensor. Ensure no obstructions are blocking sunlight from reaching the sensor. |
| Ho panyapanya kapa ho fifala. | Unstable power supply; Loose wiring connection. | Verify stable power supply. Check all wiring connections for tightness. Consult a qualified electrician if issues persist. |
| Leseli ha le khanya joalo ka ha ho ne ho lebelletsoe. | Dirty lens; Incorrect voltage. | Clean the lens. Verify input voltage is within the 100-277Vac range. |
Haeba mehato ea ho rarolla mathata e sa rarolle bothata, ka kopo ikopanye le tšehetso ea bareki.
9. Tiisetso le Tšehetso
CINOTON products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official CINOTON websebaka.
Please have your product model (B0FCMBWDVH) and purchase date available when contacting support.