Oceanlend Digital Fingerprint Lock User Manual

Selelekela

Thank you for choosing the Oceanlend Digital Fingerprint Lock. This innovative security device provides convenient and reliable access control for various applications, including refrigerators, doors, windows, drawers, and cabinets. Please read this manual carefully before installation and use to ensure proper operation and maximize the product's lifespan.

Likarolo tsa Bohlokoa:

• Tlhokomeliso ea Likhatiso tsa menoana: Quick and easy access with advanced biometric technology.
• Battery e ka nchafatsoang ea USB: Long-lasting power, up to 10 months on a single charge (based on 5 daily uses).
• Kenyelletso ea Mefuta-futa: Adjustable spacing for various furniture types.
• Kaho e Ts'oarellang: Made from high-quality ABS plastic and steel wire for robust security.
• Ts'ebetso e Intuitive: User-friendly design suitable for all ages.

Litaba tsa Sephutheloana

Netefatsa hore lintho tsohle li teng ka har'a sephutheloana:

• 1 x Oceanlend Digital Fingerprint Lock (White)
• 1 x thapo ea ho tjhaja USB (Mofuta-C)
• 1 x Installation Kit (Adhesive pads, screws if applicable)
• 1 x Buka ea Mosebelisi (Tokomane ena)

Sehlahisoa se Felletseview

Familiarize yourself with the components of your digital fingerprint lock.

Setšoantšo: Holimo holimo view of the Oceanlend Digital Fingerprint Lock.

Image: Dimensional diagram of the lock components.

The lock consists of two main parts: the fingerprint recognition unit and the cable attachment point. These are connected by a steel wire cable. The fingerprint unit houses the sensor, charging port, and internal battery.

Tlhophiso

1. Ho tjhaja ha Pele

Before first use, fully charge the lock. Connect the provided USB Type-C cable to the charging port on the fingerprint unit and to a standard USB power adapter (not included).

Image: Charging the lock via USB Type-C.

The indicator light will show charging status (e.g., red for charging, green for fully charged). A full charge typically takes a few hours.

2. Fingerprint Registration

The lock supports multiple fingerprints. The first fingerprint registered will be the administrator. Subsequent fingerprints will be regular users.

1. Administrator Fingerprint: Press and hold the fingerprint sensor for approximately 5 seconds until the indicator light turns blue and flashes.
2. Place your finger on the sensor, lift it, and repeat this process multiple times (usually 5-10 times) from different angles until the indicator light turns green, confirming successful registration.
3. Adding More Fingerprints: To add additional fingerprints (up to 20 total), use the administrator's registered finger to unlock the device. Then, press and hold the sensor for 5 seconds until the blue light flashes. Follow step 2 for the new fingerprint.
4. To delete all fingerprints, use the administrator's registered finger to unlock the device. Then, press and hold the sensor for 10 seconds until the red light flashes, then release. All registered fingerprints will be cleared.

Image: Registering a fingerprint for one-button unlocking.

3. Ho kenya

The lock can be installed using adhesive pads or screws (if provided and suitable for your surface). Clean the surface thoroughly before installation.

1. Determine the optimal placement for the fingerprint unit and the cable attachment point. Ensure the cable can span the desired distance without excessive tension.
2. Peel off the protective film from the adhesive pads on the back of both lock components.
3. Firmly press each component onto the clean surface for at least 30 seconds. Allow the adhesive to cure for 24 hours before applying significant force.
4. For enhanced security or on rough surfaces, use screws (if applicable) to secure the components.

Setšoantšo: Example installation on a cabinet.

The lock features adjustable ventilation spacing, allowing you to customize the installation to fit various window or door gaps. Ensure the cable is taut but not overly stressed when the lock is engaged.

Litaelo tsa Ts'ebetso

Ho notlolla

To unlock the device, simply place a registered finger on the fingerprint sensor. The indicator light will turn green, and the lock will disengage, allowing you to open the secured item.

Image: Child-friendly operation.

Ho notlela

To lock the device, simply close the secured item and ensure the cable is properly engaged between the two components. The lock will automatically secure itself.

Letšoao la Battery e tlase

When the battery is low, the indicator light may flash red or emit an audible warning. Recharge the lock promptly to ensure continuous operation.

Tlhokomelo

• Ho hloekisa: Wipe the fingerprint sensor and the lock body with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Ho tjhaja: Recharge the lock regularly, especially if it's not used frequently, to maintain battery health.
• Tlhahlobo ea Lithapo: Periodically check the steel wire cable for any signs of wear or damage. If damaged, discontinue use and contact customer support.
• Maemo a Tikoloho: Avoid exposing the lock to extreme temperatures, direct sunlight, or excessive moisture.

Ho batle phoso

Litlhaloso

Warranty le Tšehetso

Oceanlend products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the seller's return policy on the purchase platform or contact Oceanlend customer service directly through the retailer where the product was purchased.

Ka kopo, boloka bopaki ba theko ea hau bakeng sa likopo tsa tiisetso.