Edifier W800BT SE

Edifier W800BT SE Wireless Over-Ear Headphones User Manual

Model: W800BT SE

Selelekela

Thank you for choosing the Edifier W800BT SE Wireless Over-Ear Headphones. This manual provides detailed instructions for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.

Litaba tsa Sephutheloana

Netefatsa hore lintho tsohle li teng ka har'a sephutheloana sa hau:

  • Edifier W800BT SE Headphones x 1
  • Cable ea ho tjhaja ea mofuta oa C ea USB x 1
  • Buka ea mosebelisi x 1

Sehlahisoa se Felletseview

Likarolo tsa Li-headphone

  • 40mm Dynamic Drivers: Equipped with titanium-coated diaphragm driver units for clear and detailed audio.
  • Bluetooth 5.4: E fana ka khokahano e tsitsitseng le e sebetsang hantle ea waelese.
  • Phokotso ea Lerata ea AI: Enhances voice clarity during calls by filtering background noise.
  • Khokahano ea Multipoint: Allows simultaneous connection to two Bluetooth devices.
  • Bophelo bo Bolelele ba Battery: Ho fihlela lihora tse 45 tsa ho bapala.
  • Ho tjhaja kapele: 15 minutes of charge provides 8 hours of playback.
  • Mokhoa oa Papali ea Latency e tlase: Reduces audio delay for gaming.
  • Moralo o Matle: Lightweight (approx. 242g), adaptive fit, pressure-relief headband, and soft earpads.
  • Moralo o sarolohang: Bakeng sa polokelo e bonolo le ho e jara habonolo.

Taolo le Maemakepe

The Edifier W800BT SE headphones feature intuitive button controls on the earcup and a USB-C port for charging.

Diagram showing the button controls on the Edifier W800BT SE headphones, including volume up/down, play/pause, track skip, mode switch, and USB-C port.

Setšoantšo: Ho felileview of headphone controls and USB-C charging port.

  • Konopo ea Phahamiso: Single press for volume up, press and hold for next track.
  • Konopo ea Multifunction: Single press for play/pause or answer/end call, double press to reject call, triple press for voice assistant.
  • Konopo ea Phatlalatso: Single press for volume down, press and hold for previous track.
  • Konopo ea ho fetola mokhoa: Single press to cycle through Music mode, Game mode, and Theatre mode.
  • Port ea USB-C: Bakeng sa ho tjhaja li-headphones.

Tlhophiso

1. Ho tjhaja Li-headphone

Before first use, fully charge the headphones. A full charge takes approximately 1.5 hours. A 15-minute quick charge provides up to 8 hours of playback.

  1. Connect the supplied USB Type-C cable to the charging port on the headphones.
  2. Hokela ntlha e 'ngoe ea thapo ho adaptara ea matla ea USB (ha e kenyelelitsoe) kapa koung ea USB ea komporo.
  3. Lebone la pontsho le tla bontsha boemo ba ho tjhaja (mohlala, bofubedu bakeng sa ho tjhaja, le tingwa ha le tjhajilwe ka botlalo).
Close-up of the Edifier W800BT SE headphone's USB-C port with a charging cable inserted.

Setšoantšo: Kou ea ho tjhaja ea USB-C.

Graphic illustrating 45 hours of playback and 15 minutes of charging for 8 hours of use on the Edifier W800BT SE headphones.

Setšoantšo: Bophelo ba betri le lintlha tsa ho tjhaja kapele.

2. Matla On/O tima

  • Matlafatsa: Press and hold the Multi-function button for approximately 3 seconds until the indicator light flashes.
  • Tlosa motlakase: Press and hold the Multi-function button for approximately 5 seconds until the indicator light turns off.

3. Bluetooth pairing

Ho hokela li-headphones ho sesebelisoa:

  1. Netefatsa hore li-headphone li tima.
  2. Press and hold the Multi-function button for approximately 5 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
  3. Sesebedisweng sa hao (smartphone, tablet, komporo), bula Bluetooth mme o batle disebediswa tse teng.
  4. Select "EDIFIER W800BT SE" from the list of found devices.
  5. Ha e se e hokahantsoe, lebone la sesupo le tla benya boputsoa butle.
Image of a Bluetooth 5.4 chip, representing the advanced connectivity of the headphones.

Image: Bluetooth 5.4 technology for stable connection.

4. Multipoint Connection

The W800BT SE headphones support connecting to two Bluetooth devices simultaneously.

  1. Pair the headphones with the first device (e.g., your smartphone) as described above.
  2. Tima Bluetooth sesebelisoa sa pele. Li-headphone li tla kena hape mokhoeng oa ho li kopanya.
  3. Pair the headphones with the second device (e.g., your laptop).
  4. Re-enable Bluetooth on the first device. The headphones will automatically connect to both devices.
  5. To switch between devices, pause playback on the currently active device and start playback on the other. For calls, the headphones will automatically switch to the device receiving the call.
Graphic showing a smartphone and a laptop connected to the Edifier W800BT SE headphones, illustrating multipoint connection.

Image: Multipoint connection with phone and laptop.

Litaelo tsa Ts'ebetso

Litaolo tsa Motheo

Ketso Tobetsa konopo
Motlakase/O tima Press and hold Multi-function button (3s for On, 5s for Off)
Bapala/Emisa Mmino Single press Multi-function button
Araba/Fetsa Pitso Single press Multi-function button
Hana Pitso Double press Multi-function button
Phahamisa Phahamiso Single press Volume Up button
Phatlalatso ea Phahamiso Single press Volume Down button
Next Track Press and hold Volume Up button
Pina e Fetileng Press and hold Volume Down button
Kenya Voice Assistant Triple press Multi-function button
Switch Mode (Music/Game/Theatre) Single press Mode Switch button

AI Bitsa Phokotso ea Lerata

The integrated AI call noise reduction algorithm and high-sensitivity microphones work to filter out ambient noise, ensuring your voice is clear during phone calls.

Graphic illustrating AI Call Noise Reduction, showing 'Noise' and 'Voice' separation.

Image: AI Call Noise Reduction in action.

Mokhoa oa Papali

Activate Game Mode for an ultra-low latency experience (0.06s), providing enhanced sound effects and perfect audio-visual synchronization for gaming.

A person playing a mobile game with the Edifier W800BT SE headphones, highlighting the 0.06s low latency.

Image: Low latency gaming experience.

Edifier ConneX App

Enhance your headphone experience by downloading the EDIFIER ConneX app. The app provides additional functions:

  • Personalized control settings
  • Preset EQ options
  • Litlhophiso tsa EQ tseo u ka li khethang
  • Schedule power off
  • "Find Your Product" feature
Screenshots of the Edifier ConneX app interface showing various settings like EQ customization and sound modes.

Image: Edifier ConneX App interface.

Tlhokomelo

  • Keep the headphones dry. Do not expose them to extreme temperatures.
  • Hloekisa li-headphones ka lesela le bonolo, le omeletseng. Qoba ho sebelisa lik'hemik'hale tse bohale kapa lintho tse senyang.
  • Boloka li-headphones sebakeng se phodileng, se omileng ha se sa sebelisoe. Moralo o ka phuthoang o lumella polokelo e kopaneng.
  • Qoba ho lihela kapa ho beha li-headphone tlas'a tšusumetso e matla.
  • Do not attempt to disassemble the headphones. This will void the warranty.

Ho batle phoso

Bothata Tharollo
Cannot power on headphones. Netefatsa hore li-headphone li tjhajiloe. Hokela mohloling oa motlakase o sebelisa thapo ea USB-C.
Ha e khone ho hokahanya le sesebelisoa sa Bluetooth.
  • Ensure headphones are in pairing mode (red and blue indicator light flashing).
  • Netefatsa hore Bluetooth e butswe sesebedisweng sa hao.
  • Suthisetsa li-headphone haufi le sesebelisoa (ka hare ho limithara tse 10).
  • Clear previous Bluetooth connections on your device and try again.
Ha ho na molumo kapa molumo o tlase.
  • Adjust volume on both the headphones and the connected device.
  • Netefatsa hore di-headphone di hokahantswe hantle le sesebediswa.
  • Leka ho kopanya li-headphone hape.
Boleng ba lentsoe ha boa hlaka.
  • Ensure there are no obstructions between the headphones and the device.
  • Move away from sources of interference (e.g., Wi-Fi routers, other Bluetooth devices).
  • Leka mehloli e fapaneng ea molumo kapa files.
Mehala ha e hlake. Ensure the microphone is not obstructed. The AI Call Noise Reduction feature is active during calls.

Litlhaloso

  • Mohlala: W800BT SE
  • Mofuta oa Bluetooth: 5.4
  • Bluetooth Profiles: A2DP, AVRCP, HFP
  • Sebaka se Sebetsang: 10 limithara
  • Yuniti ea Bakhanni: 40mm Dynamic Driver with Titanium-coated Diaphragm
  • Hangata Karabo: Up to 20 kHz (Typical range is 20Hz-20kHz)
  • Tšitiso: 32 ohm
  • Bophelo ba Battery: Ho fihla ho lihora tse 45 (ho bapala)
  • Boema-kepe ba ho tjhaja: USB Type-C
  • Nako ea ho tjhaja: Approximately 1.5 hours (full charge), 15 minutes for 8 hours playback
  • Boima ba 'mele: Hoo e ka bang 242g
  • Boholo: 3.35 x 3.15 x 3.35 inches (Product dimensions)
  • Mofuta oa Taolo: Button Control, App Control (Edifier ConneX)
  • Likarolo tse Khethehileng: AI Call Noise Reduction, Multipoint Connection, Low Latency Game Mode (0.06s), Lightweight, Foldable Design

Warranty le Tšehetso

Edifier products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included in your package or visit the official Edifier websebaka. Boloka rasiti ea hau ea theko e le bopaki ba hore u rekile.

Official Edifier Websebaka: www.edifier.com

Video ea Sehlahisoa sa Molao

Video: Sehlahisoa sa semmuso se felileview of the Edifier W800BT SE Wireless Over-Ear Bluetooth 5.4 Headphones, demonstrating key features and design.

© 2024 Mohlophisi. Litokelo tsohle li sirelelitsoe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.