Sharp GX-BT190 Crystal Clear Series Portable Bluetooth Speaker User Manual

Selelekela

Kea leboha ha u rekileasing the Sharp GX-BT190 Crystal Clear Series Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

Image: The Sharp GX-BT190 portable Bluetooth speaker, showcasing its illuminated ring and robust design, surrounded by a light mist.

Se ka Lebokoseng

Etsa bonnete ba hore lintho tsohle li teng nakong ea unboxing:

• Sebui sa Bluetooth sa Sharp GX-BT190
• Lanyard (for easy carrying)
• USB Charging Cable (Mofuta-C)
• Bukana ea mosebelisi (tokomane ena)

Sehlahisoa se Felletseview

The Sharp GX-BT190 is designed for portability and durability, featuring intuitive controls and a robust build.

Setšoantšo: Sebaka se tobileng view of the Sharp GX-BT190 speaker, highlighting the central Sharp logo and the surrounding blue LED mood light.

Likarolo tsa Bohlokoa:

• IP67 e sa keneleng metsi le e thibelang lerole: Designed to withstand immersion in water and protect against dust, allowing it to float.
• Bophelo ba Betri ea Lihora tse 15: Extended playtime for continuous music enjoyment.
• 6 LED Mood Light Modes: Dynamic lighting effects that synchronize with your music.
• Tsela ea 'Nete ea Wireless Stereo (TWS): Connect two GX-BT190 speakers for an enhanced stereo sound experience.
• Ho Letsa Ntle le Matsoho: Built-in microphone for convenient call management.
• Moralo o nkehang habonolo: Lightweight (8 ounces) with an included lanyard for easy transport.

Tlhophiso

1. Ho lefisa Sepikara

Before first use, fully charge the speaker. A full charge takes approximately 3-4 hours.

1. Locate the charging port, usually protected by a waterproof flap.
2. Open the flap and connect the supplied USB charging cable to the speaker's charging port.
3. Hokela ntlha e 'ngoe ea thapo ea USB ho adaptara ea matla ea USB (ha e kenyelelitsoe) kapa koung ea USB ea komporo.
4. The charging indicator light will illuminate. It will turn off or change color once fully charged.

2. Matla On/O tima

• Ho Matlafatsa: Press and hold the Power button for approximately 2-3 seconds until you hear an audible prompt and the LED lights activate.
• Ho tima: Press and hold the Power button again for approximately 2-3 seconds until you hear an audible prompt and the LED lights turn off.

3. Bluetooth pairing

Connect your Sharp GX-BT190 speaker to your Bluetooth-enabled device.

Image: A hand holding the Sharp GX-BT190 speaker, positioned next to a smartphone screen showing its Bluetooth settings, illustrating the pairing process.

1. Ensure the speaker is powered on and in pairing mode (the LED indicator will typically flash rapidly).
2. On your smartphone, tablet, or other Bluetooth device, go to the Bluetooth settings menu.
3. Batla available devices. You should see "SHARP GX-BT190" in the list.
4. Select "SHARP GX-BT190" to connect. Once connected, you will hear a confirmation sound, and the LED indicator will typically stop flashing and remain solid.
5. Sebui se tla leka ka bohona ho hokela hape sesebedisweng sa ho qetela se kopantsoeng ha se butswe.

4. Ho kopanya Stereo ea 'Nete e se nang Mohala (TWS)

For an immersive stereo experience, you can pair two Sharp GX-BT190 speakers together.

1. Ensure both GX-BT190 speakers are powered on and not connected to any Bluetooth device.
2. On one of the speakers (this will be your primary speaker), press and hold the TWS button (refer to speaker diagram if available, otherwise assume a dedicated button or a combination).
3. Sebui sa mantlha se tla batla sebui sa bobedi. Hang ha se hokahantsoe, o tla utloa molumo oa netefatso.
4. Now, connect your Bluetooth device to the primary speaker as described in the "Bluetooth Pairing" section. Both speakers will play audio in stereo.
5. To disconnect TWS, press and hold the TWS button on either speaker.

Ho sebetsa Sebui

1. Ho Bapala 'Mino

• Bapala/Emisa: Tobetsa konopo ea Play/Emisa hang ho bapala kapa ho emisa mmino.
• Phahamiso ea Phahamiso / Tlase: Press the Volume + button to increase volume, and the Volume - button to decrease volume.
• Pina e Latelang: Press and hold the Volume + button to skip to the next track.
• Pina e fetileng: Press and hold the Volume - button to go to the previous track.

2. Ho Letsa ho se Na Matsoho

Ha e hokahantsoe le smartphone ea hau, sebui se ka sebelisoa bakeng sa mehala e sa sebelisoeng ka matsoho.

• Araba Mohala: Press the Play/Pause button once when an incoming call rings.
• Qetella Mohala: Press the Play/Pause button once during a call to end it.
• Hana Mohala: Press and hold the Play/Pause button for 2 seconds when an incoming call rings.

3. LED Mood Lights

The speaker features 6 different LED mood light modes.

• Fetola Mokhoa: Press the Light Mode button (or a dedicated button, if available) to cycle through the different light effects.
• Tima Mabone: Continue pressing the Light Mode button until the lights turn off, or press and hold the button for 2 seconds.

4. Waterproof and Floating Functionality

Image: The Sharp GX-BT190 speaker covered in water droplets, demonstrating its IP67 waterproof rating and suitability for use near water.

The GX-BT190 is IP67 rated, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. It is also designed to float on water.

• Ensure the charging port flap is securely closed before exposing the speaker to water.
• Do not submerge the speaker for extended periods or beyond the specified depth.
• After exposure to water, wipe the speaker dry with a soft cloth before charging.

Tlhokomelo

1. Ho hloekisa

• Hlakola sebui ka bonolo, damp lesela. O se ke wa sebedisa dihlatswa tse kgohlang, jwala, kapa dihlatswa-mmele tsa dikhemikhale.
• Ensure the charging port is dry before connecting any cables.

2. Polokelo

• Beha sebui sebakeng se pholileng, se omileng hole le khanya ea letsatsi le mocheso o feteletseng.
• Haeba e boloka nako e telele, tjhaja betri ho isa ho 50% ka mor'a likhoeli tse ling le tse ling tse 'maloa ho boloka bophelo bo botle ba betri.

3. Tlhokomelo ea Battery

• Qoba ho ntsha betri ka botlalo kgafetsa.
• Se ke oa beha betri mochesong o feteletseng kapa mohatselang.

Ho batle phoso

Litlhaloso

Image: The Sharp GX-BT190 speaker displayed next to a smartphone, with measurements indicating its compact size of approximately 3.5 inches wide and 2.9 inches high.

Warranty le Tšehetso

Boitsebiso ba Warranty

The Sharp GX-BT190 speaker comes with a Waranti ea lilemo tse 1 from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims, please retain your proof of purchase.

Tšehetso ea Bareki

If you encounter any issues or have questions regarding your Sharp GX-BT190 speaker, please contact Sharp customer support. Refer to the official Sharp websaete kapa sephutheloana sa sehlahisoa sa hau bakeng sa tlhaiso-leseling ea morao-rao ea puisano.

• Before contacting support, please review karolo ea Tharollo ea mathata ea buka ena.
• Have your product model number (GX-BT190) and proof of purchase ready.