1. Selelekela
This manual provides instructions for the safe and effective operation of the IXITAB KWS-2301C Multi-Function Digital Display DC Voltage Ammeter Power Meter. This device is designed to measure and display various electrical parameters for Type-C cell phone charging and other DC applications.
2. Boitsebiso ba Tšireletseho
- Netefatsa hore ho kenya molumotage and current are within the specified operating range (DC 4-30V, 0-12A).
- Se ke oa qhaqha kapa oa fetola sesebelisoa.
- Avoid exposure to extreme temperatures, moisture, or corrosive environments.
- Boloka moo bana ba ka fihlang teng.
- Use only with compatible Type-C devices and power sources.
3. Sehlahisoa Overview
The KWS-2301C is a compact, multi-functional tester featuring a 0.77-inch OLED HD display and a 12A high-current terminal. It is designed for real-time monitoring of charging voltage, current, power, energy, capacity, and timing.

Setšoantšo sa 3.1: Pele view of the IXITAB KWS-2301C tester, showing its compact design and OLED display.
3.1 Likarolo tsa Bohlokoa
- 0.77-inch OLED HD Display for clear visibility.
- 12A High Current Terminal for stable performance.
- Metal shell for dustproof and drop-proof durability.
- Full interface compatibility (Type-C).
- Two-way current test function.
- Real-time charging power detection and fast charging test support.

Setšoantšo sa 3.2: The KWS-2301C highlighting its 0.77-inch OLED HD display and 12A high current terminal, ensuring full interface compatibility.
4. Seta
- Kopanya Mohloli oa Matla: Insert the male Type-C connector of the KWS-2301C into a compatible DC power source (e.g., a wall charger, power bank, or computer USB-C port).
- Hokela Sesebelisoa: Insert the Type-C charging cable of the device you wish to test (e.g., cell phone, tablet) into the female Type-C port on the KWS-2301C.
- Matlafatsa: The device will automatically power on and display readings once connected.
5. Litaelo tsa Ts'ebetso
5.1 Mekhoa ea ho bontša
The KWS-2301C features two display orientations for convenient viewng.

Setšoantšo sa 5.1: The KWS-2301C demonstrating its ability to switch between two display orientations for optimal viewng.
5.2 Changing Display Orientation
To change the display orientation, tobetsa konopo habeli located on the side of the device. This will rotate the display content by 180 degrees.
5.3 Ho Hlalosa Lipalo
The OLED display shows multiple parameters simultaneously:
- Moqtage (V): E bonts'a DC vol ea hona joaletage.
- Hona joale (A): Displays the current DC ampkhalefo.
- Matla (W): Displays the real-time power consumption (Voltagex Hajoale).
- Timing (H): Records the elapsed time of the measurement.
- Bokgoni (Mah): Accumulates the total charge transferred.
- Electrical Energy (Wh): Accumulates the total energy consumed.
6. Tlhokomelo
- Ho hloekisa: Hlakola sesebelisoa ka lesela le bonolo, le omeletseng. Se ke oa sebelisa li-abrasive cleaners kapa solvents.
- Polokelo: Boloka sesebelisoa sebakeng se phodileng, se omeletseng hole le letsatsi le mocheso o feteletseng.
- Ho tšoara: The metal shell provides durability, but avoid dropping or subjecting the device to severe impacts.
7. Ho rarolla mathata
7.1 No Display/No Readings
- Ensure the device is properly connected to both the power source and the load.
- Verify that the power source is active and providing voltage within the specified range (DC 4-30V).
- Check for any damage to the Type-C connectors or cables.
7.2 Lipalo tse sa Nepahalang
- Netefatsa hore likhokahano tsohle li bolokehile ebile ha li na litšila.
- Test with a different power source or load to isolate the issue.
- Readings may vary slightly depending on cable quality and device being charged.
8. Litlhaloso

Setšoantšo sa 8.1: Dimensional drawing of the KWS-2301C, showing its compact size.
| Paramethara | Boleng |
|---|---|
| Moqtage Range | DC 4-30V |
| Range ea Hona joale | 0-12A |
| Nako ea Nako | Lihora tse 0-99 |
| Range ea Matla | 0-360W |
| Boemo ba Bokgoni | 0-99999mAh |
| Electrical Energy Range | 0-99999Wh |
| Ambient Mocheso | Ho fihlela ho 50 ° C |
| Litekanyo (L x W x H) | E ka ba 46.4 x 16.5 x 9 mm (1.83 x 0.65 x 0.35 inches) |
| Boima ba Ntho | Hoo e ka bang li-ounces tse 1.76 |
9. Tiisetso le Tšehetso
For warranty information and technical support, please refer to the documentation provided with your purchase or contact IXITAB customer service through their official channels. Specific warranty terms may vary by region and retailer.