Lectrosonics DPR-A

Buka ea Mosebelisi ea Lectrosonics DPR-A Digital Plug On Transmitter

Model: DPR-A

1. Selelekela

The Lectrosonics DPR-A is a state-of-the-art digital plug-on transmitter designed for professional audio applications. It offers a unique design that seamlessly integrates with any microphone or line-level source via a standard XLR connector. This manual provides detailed instructions for the proper setup, operation, and maintenance of your DPR-A transmitter.

Key features include a wide tuning range across the UHF television band, selectable output power, and robust AES 256-CTR encryption for secure transmissions. Its external antenna ensures exceptional operating range and reliability.

2. Boitsebiso ba Bohlokoa ba Tšireletseho

Please read and follow all safety instructions carefully to prevent damage to the device or injury to yourself.

  • Do not expose the unit to water or excessive moisture.
  • Avoid extreme temperatures. Operate the device within its specified temperature range.
  • U se ke ua leka ho bula kapa ho lokisa yuniti ka bouena. Romela litšebeletso tsohle ho basebetsi ba tšoanelehang.
  • Sebelisa libeteri tse boletsoeng feela 'me u li lahlele ka nepo.
  • Netefatsa moea o nepahetseng ha o sebelisa sesebelisoa.
  • Boloka moo bana ba ka fihlang teng.

3. Likarolo tsa Sehlahisoa le Litaolo

Familiarize yourself with the various parts and controls of your DPR-A transmitter.

Lectrosonics DPR-A Digital Plug On Transmitter

Setšoantšo sa 3.1: Lectrosonics DPR-A Digital Plug On Transmitter showing the XLR connector, control panel with LCD, and antenna connector.

3.1. Front Panel Controls le Pontšo

  • Pontšo ea LCD: Shows frequency, battery status, audio levels, menu options, and other operational information.
  • MENU/SEL Button: Used to enter menus and select options.
  • KONopo EA MORA: Used to return to the previous menu or exit a setting without saving.
  • Konopo ea Matla (⑂): Press and hold to power the unit on or off.
  • hodimo (↑) le tlase (↓) Likonopo: Used to navigate menu options and adjust values.
  • PWR KEY LED: Indicates power status and key lock.
  • Audio Level Indicators (-10, -20): LEDs indicating input audio signal levels.

3.2. Lihokelo

  • XLR Connector (Male): Standard 3-pin XLR for connecting microphones or line-level audio sources.
  • Antenna Connector (SMA): For attaching the external antenna.

4. Tataiso ea ho seta

Follow these steps to prepare your DPR-A transmitter for operation.

4.1. Ho kenya Battery

  1. Locate the battery compartment (typically on the side or bottom of the unit).
  2. Bula sekwahelo sa karolo ya betri.
  3. Insert fresh batteries, observing the correct polarity (+/-) as indicated inside the compartment.
  4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

4.2. Microphone/Line Source Connection

  1. Align the XLR connector of your microphone or audio source with the XLR input on the DPR-A transmitter.
  2. Push firmly until it clicks into place, ensuring a secure connection.

4.3. Khokahano ea Antenna

  1. Screw the supplied antenna onto the SMA antenna connector on the side of the transmitter.
  2. Tighten the antenna finger-tight; do not overtighten.

5. Ts'ebetso

This section details how to operate your DPR-A transmitter.

5.1. Ho tima/Ho tima

  • Ho Matlafatsa: Tobetsa 'me u tšoare konopo ea Matla (⑂) for approximately 2 seconds until the display illuminates.
  • Ho tima: Tobetsa 'me u tšoare konopo ea Matla (⑂) for approximately 2 seconds. The display will show a power-down confirmation; release the button to confirm.

5.2. Ho tsamaya ho Menu

  • Tobetsa MENU/SEL ho kenya menu e kgolo.
  • Sebelisa le Up (↑) le Tlase (↓) buttons to scroll through menu options.
  • Tobetsa MENU/SEL again to select a highlighted option or enter a sub-menu.
  • Sebelisa Up (↑) le Tlase (↓) to change values or settings.
  • Tobetsa MENU/SEL to confirm a setting, or KHUTLANG ho tsoa ntle le ho boloka.
  • Tobetsa KHUTLANG repeatedly to return to the main operating screen.

5.3. Khetho ea Maqhubu

The DPR-A can tune from 470.100 to 607.950 MHz.

  1. From the main menu, navigate to the "Frequency" or "Tune" option.
  2. Sebelisa le Up (↑) le Tlase (↓) buttons to adjust the frequency in 100 kHz or 25 kHz steps.
  3. Tobetsa MENU/SEL to confirm the selected frequency.

5.4. Phetoho ea Matla a Output

The transmitter offers selectable output power of 25 mW or 50 mW.

  1. Navigate to the "Power" or "RF Power" setting in the menu.
  2. Select either 25 mW or 50 mW using the Up (↑) le Tlase (↓) likonopo.
  3. Tobetsa MENU/SEL ho boloka maemo.

5.5. Encryption (AES 256-CTR)

The DPR-A supports AES 256-CTR encryption for secure communication. Refer to the detailed encryption setup instructions in the full Lectrosonics manual for key generation and synchronization procedures.

6. Tlhokomelo

Proper care and maintenance will extend the life of your DPR-A transmitter.

6.1. Ho hloekisa

  • Hlakola bokantle ba yuniti ka lesela le bonolo, le omeletseng.
  • Bakeng sa litšila tse manganga, sebelisa d hanyenyaneamp lesela le nang le sesepa se bonolo, ebe o hlakola hang-hang.
  • U se ke ua sebelisa lihlatsoi tse khorofo, li-solvent, kapa lik'hemik'hale tse matla.

6.2. Tlhokomelo ea Battery

  • Tlosa libeteri haeba yuniti e ke ke ea sebelisoa nako e telele ho thibela ho lutla.
  • Always use high-quality batteries.

6.3. Polokelo

  • Boloka transmitter sebakeng se phodileng, se omeletseng hole le letsatsi le mocheso o feteletseng.
  • Protect the unit from physical shock and vibration.

7. Ho rarolla mathata

This section addresses common issues you might encounter with your DPR-A transmitter.

BothataLebaka le ka khonehangTharollo
Yuniti ha e sebetse.Libetri tse shoeleng kapa tse kentsoeng ka phoso.Fetola libeteri kapa u hlahlobe polarity.
No audio output from receiver.Incorrect frequency setting; transmitter not powered on; microphone not connected.Verify frequency matches receiver; ensure transmitter is on; check microphone connection.
Poor operating range or signal dropouts.Antenna not properly connected; interference; low output power.Ensure antenna is securely attached; check for sources of interference; increase output power if necessary.
Pontsho e lerootho kapa ha e arabele.Low battery; extreme temperature.Replace batteries; move unit to a moderate temperature environment.

If the problem persists after trying these solutions, please contact Lectrosonics customer support.

8. Litlhaloso

Technical specifications for the Lectrosonics DPR-A Digital Plug On Transmitter.

  • Mohlala: DPR-A
  • Marang-rang: 470.100 - 607.950 MHz (UHF TV Band)
  • Mehato ea Tokiso: 100 kHz kapa 25 kHz
  • Output Power: Selectable 25 mW or 50 mW
  • Encryption: AES 256-CTR
  • Kenyo ea Molumo: Standard XLR connector (microphone/line level)
  • Sehokelo sa Antenna: Mofuta oa SMA
  • Boima ba Ntho: 2 liponto
  • ASIN: B0CPTLS5RX
  • Letsatsi la Pele la ho Fumana: La 6 Phato 2024

9. Boitsebiso ba Tiisetso

Lectrosonics products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the warranty card included with your purchase or visit the official Lectrosonics websebaka. Boloka bopaki ba hau ba theko bakeng sa likopo tsa waranti.

10. Tšehetso ea Bareki

For technical assistance, service, or additional information, please contact Lectrosonics customer support:

  • Websebaka: www.lectrosonics.com/support
  • Mohala: Sheba ho websebaka sa linomoro tsa ho ikopanya le libaka.
  • Lengolo-tsoibila: Sheba ho websebaka sa marang-rang bakeng sa liaterese tsa imeile tsa tšehetso.

When contacting support, please have your product model (DPR-A) and serial number ready.

© 2024 Lectrosonics. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.