XPG Core Reactor II 850W Modular Power Supply User Manual

1. Selelekela

The XPG Core Reactor II 850W Modular Power Supply is engineered to deliver stable and efficient power to your computing system. Compliant with the Intel ATX 3.0 design guide and featuring an 80 PLUS Gold certification, this power supply ensures reliable performance for a wide range of PC builds. Its fully modular design simplifies cable management, contributing to a cleaner and more organized internal setup.

Figure 1: XPG Core Reactor II 850W Power Supply

2. Likahare tsa Sephutheloana

Netefatsa hore lintho tsohle tse thathamisitsoeng ka tlase li kenyelelitsoe sephutheloana sa sehlahisoa sa hau:

• XPG Core Reactor II 850W Modular Power Supply Unit
• Modular Cable Set (including 12VHPWR cable)
• Khoele ea Matla ea AC
• Mounting Screws
• Bukana ea mosebelisi (tokomane ena)

3. Likarolo

• Intel ATX 3.0 Design Guide Compliant: Equipped with a 12VHPWR (12+4) Connector for next-generation GPUs.
• Certified GOLD Efficiency: Achieves high efficiency ratings by both 80 PLUS and Cybenetics, reducing energy waste and heat generation.
• Premium Japanese Capacitors: Utilizes 100% Japanese 105℃ Capacitors for enhanced stability and long-term reliability.
• Fluid Dynamic Bearing (FDB) Fan: Features an FDB fan with intelligent fan control for quiet operation and efficient cooling.
• Available in Multiple Wattages: Models available in 1200W, 1000W, 850W, 750W, and 650W to suit various system requirements.

Figure 2: ATX 3.0 and 12VHPWR Connector Details

Figure 3: Japanese 105°C Capacitors

4. Litlhaloso

Figure 4: Cable Configuration for Core Reactor II Series

5. Seta

Follow these steps to properly install your XPG Core Reactor II 850W Power Supply:

1. Lokisetsa Sisteme ea Hau: Ensure your computer is powered off and unplugged from the wall. Open your PC case to access the power supply mounting area.
2. Kenya PSU: Secure the XPG Core Reactor II PSU into the designated power supply bay in your PC case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards an intake vent).
3. Hokela Likhoele tsa Bohlokoa:
   • 24-Pin ATX Motherboard Cable: Connect the large 24-pin cable from the PSU to the corresponding port on your motherboard.
   • CPU Power Cables: Connect the 4+4-pin or 8-pin CPU power cables to the CPU power headers on your motherboard. Modern motherboards may require two such connections.
   • GPU Power Cables: For graphics cards requiring a 12VHPWR connector, use the dedicated 12VHPWR (12+4) cable. For other GPUs, use the appropriate 6+2-pin PCI-E cables. Ensure all connections are fully seated.
   • SATA/Molex Cables: Connect SATA power cables to your storage drives (SSDs, HDDs) and Molex cables to any other peripherals requiring them.
4. Tsamaiso ea Cable: Utilize the fully modular design to connect only the necessary cables, improving airflow and aesthetics within your case. Route cables neatly to prevent obstruction.
5. Tlhahlobo ea ho Qetela: Hlahloba dikgokelo tsohle habeli ho netefatsa hore di sireletsehile. Kwala khetla ya PC ya hao.

Figure 5: Modular Cable Ports

Setšoantšo sa 6: Lehlakore View of Modular Connections

6. Litaelo tsa Ts'ebetso

After successful installation, connect the AC power cord to the PSU and then to a wall outlet. Flip the main power switch on the back of the PSU to the 'ON' position. You can then power on your computer as usual.

The XPG Core Reactor II features an intelligent FDB fan control. The fan operates silently at low loads and adjusts its speed dynamically to maintain optimal temperatures under heavier loads. This ensures efficient cooling without unnecessary noise.

Figure 7: Main Power Switch and AC Inlet

7. Tlhokomelo

To ensure the longevity and optimal performance of your power supply, consider the following maintenance tips:

• E boloke e hloekile: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air for hard-to-reach areas.
• Etsa bonnete ba hore ho na le moea o nepahetseng: Make sure your PC case has adequate airflow and that the power supply's intake and exhaust vents are not obstructed.
• Qoba ho Tlameha: Ensure your system's power consumption does not consistently exceed the PSU's rated wattage.

8. Ho rarolla mathata

If you encounter issues with your XPG Core Reactor II 850W Power Supply, try the following steps:

• Ha ho Matla:
  • Lekola hore na thapo ea motlakase ea AC e hokahane ka mokhoa o sireletsehileng ho PSU le lebota.
  • Ensure the main power switch on the PSU is in the 'ON' position.
  • Verify that the 24-pin ATX and CPU power cables are correctly and firmly connected to the motherboard.
• Ho se Tsitse ha Sistimi/Ho Thibela ka Tsela e sa Lebelloang:
  • Ensure all component power cables (GPU, CPU, etc.) are securely connected.
  • Confirm that your system's total power draw does not exceed the 850W capacity of the PSU. High-end components, especially GPUs, can have significant power spikes.
  • Hlahloba hore na ho na le moea o kenang hantle ka har'a khetla ea PC ea hau ho thibela ho chesa haholo.
• Lerata le sa tloaelehang:
  • If the fan is unusually loud, ensure it is not obstructed by cables or dust.
  • A slight buzzing noise under heavy load can sometimes occur with certain components; however, persistent loud or grinding noises may indicate a fan issue.

If issues persist after following these steps, please contact XPG customer support.

9. Tiisetso le Tšehetso

The XPG Core Reactor II 850W Modular Power Supply comes with a Warranty ea Selemo se 10, ho netefatsa ho tšepahala ha nako e telele le khotso ea kelello. Tiisetso ena e koahela mefokolo ea thepa le moetso tlas'a tšebeliso e tloaelehileng.

For technical support, warranty claims, or further assistance, please visit the official XPG websebaka kapa ikopanye le lefapha la litšebeletso tsa bareki. Boloka bopaki ba theko ea hau bakeng sa netefatso ea tiisetso.

Moetsi: ADATA

Nomoro ea Mohlala: COREREACTORII850G-BKCUS