1. Selelekela
This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.
Setšoantšo sa 1: Pele view of the Barska AX13744 Biometric Safe.
2. Boitsebiso ba Tšireletseho
- Always keep emergency keys in a secure location away from the safe. Do not store them inside the safe.
- Netefatsa hore tšireletso e kentsoe ka mokhoa o sireletsehileng ho thibela ho tlosoa ntle ho tumello.
- Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
- Regularly check battery levels to ensure proper function of the electronic lock.
- Keep the safe door closed and locked when not in use.
3. Likahare tsa Sephutheloana
Netefatsa hore lintho tsohle tse thathamisitsoeng ka tlase li kenyelelitsoe ka har'a sephutheloana sa hau:
- Barska AX13744 Safe Unit
- 2 Adjustable Shelves with Shelf Brackets
- 4 Libetri tsa AA
- Mounting Hardware (bolts, anchors)
- Set of Emergency Back-Up Keys (2 keys)
Figure 2: Included components and product dimensions.
4. Seta
4.1. Ho kenya Battery
- Locate the battery compartment on the inside of the safe door.
- Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
- Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.
4.2. Initial Access and Opening
Upon first use, open the safe using the emergency keys:
- Locate the keyhole cover on the electronic keypad.
- Remove the cover to expose the keyhole.
- Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
- Once open, you can proceed with programming fingerprints and PIN codes.
4.3. Ho phahamisa Sireletsehile
The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.
- Choose a suitable location for the safe, ensuring a stable surface.
- Mark the pre-drilled mounting points on the floor through the safe's base.
- Drill pilot holes into the floor at the marked locations.
- Position the safe over the holes and secure it using the provided bolts and anchors.
- Ensure the safe is firmly attached and does not wobble.
Setšoantšo sa 3: Hare-hare view of the safe with adjustable shelves.
5. Litaelo tsa Ts'ebetso
5.1. Biometric Fingerprint Access
The safe can store up to 160 distinct fingerprints.
- To program a fingerprint, press the programming button located inside the safe.
- Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
- Repeat the scan multiple times for better accuracy.
- To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.
5.2. Keypad PIN Code Access
The safe supports up to 2 unique PIN codes.
- To program a PIN code, press the programming button inside the safe.
- Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
- Repeat the process to confirm the PIN code.
- To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.
5.3. Emergency Key Access
In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.
Figure 4: Emergency access using a 9V battery (not included).
5.4. Sistimi ea Alamo
- Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
- Lock Out Mode: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
- Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.
5.5. Leseli la LED la ka hare
The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.
5.6. Liraka tse Fetohang
The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.
Video 1: Nako e khutšoanyane ea peleview demonstrating the advanced security features of the Barska safe, including biometric and keypad access.
6. Tlhokomelo
- Ho hloekisa: Hlakola bokantle ba sesefo ka lesela le bonolo, damp lesela. Qoba li-abrasive cleaners kapa solvents.
- Phetoho ea Betri: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
- Lock Mechanism: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.
7. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Safe does not open with fingerprint/PIN. | Low batteries, incorrect fingerprint/PIN, lockout mode activated. | Replace batteries. Re-enter correct fingerprint/PIN. Use emergency key. Wait for lockout mode to reset. |
| Keypad ha e arabele. | Libetri tse shoeleng. | Use emergency 9V battery for temporary power (see Figure 4) or emergency keys. Replace internal AA batteries. |
| Alamo e lla ho sa lebelloa. | Motion sensor triggered, tampering attempt. | Ensure safe is stable. Check for signs of tampering. Deactivate motion sensor if not needed. |
| Monyako ha o koalehe hantle. | Obstruction, misaligned bolts. | Check for items blocking the door or bolts. Ensure safe is on a level surface. |
8. Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Brand | Barska |
| Nomoro ea Mohlala | AX13744 |
| Bokhoni | 2.02 Maoto a Likhubiki |
| Litekanyo tsa Sehlahisoa (Tse ka Ntle) | 13.78"D x 26"W x 16.93"H |
| Mofuta oa Lock | Biometric, Electronic Combination Lock, Senotlolo |
| Lintho tse bonahalang | Alloy Steel |
| Ho hanyetsa Mollo | Metsotso e 30 ho 1400 ° F. |
| Mofuta oa ho Beha | Mokatong Mount |
| Likarolo Tse Khethehileng | Alarm System, Anti-Theft, Combination Lock, Fire Resistant, Sensor Light |
| Mohloli oa Matla | 4 AA Batteries (e kenyelelitsoe) |
| Boima ba Ntho | 112.3 liponto |
Figure 5: Fire resistance features of the safe.
9. Tiisetso le Tšehetso
Bakeng sa tlhahisoleseding ea waranti, ka kopo sheba ofisiri ea moetsi website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their websebaka.
Lipotso Tse Botsoang Hangata:
- Are replacement parts or accessories available for this product if needed? Ka kopo etela rona website to request keys or replacement parts.