Buka ea Mosebetsi ea Mochini oa ho Suction oa AURA Livac 114R

1. Selelekela

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.

2. Litaelo tsa Tšireletso

WARNING: To reduce the risk of fire, electric shock, or injury, read and follow all instructions carefully.

• Always disconnect the power cord from the electrical outlet before servicing.
• Do not use the appliance on wet surfaces when operating in dry mode.
• U se ke ua nka maro a tukang kapa a chang, a kang peterole, kapa ua a sebelisa libakeng tseo e ka ’nang eaba li teng.
• U se ke ua nka ntho leha e le efe e tukang kapa e tsubang, e kang lisakerete, lichelete kapa molora o chesang.
• Beha moriri, liaparo tse hlephileng, menoana le likarolo tsohle tsa 'mele hole le libaka tse bulehileng le tse tsamaeang.
• Sebelisa feela joalokaha ho hlalositsoe bukeng ena. Sebelisa feela likhothaletso tse khothaletsoang ke moetsi.
• Se ke oa sebelisa thapo kapa plug e senyehileng. Haeba sesebelisoa se sa sebetse kamoo se neng se lokela ho sebetsa kateng, se lahliloe, se senyehile, se siiloe ka ntle, kapa se lahletsoe ka metsing, se khutlisetse setsing sa litšebeletso.
• U se ke ua hula kapa ua jara ka khoele, sebelisa khoele e le mofeng, koala lemati holim'a thapo, kapa ua hula khoele ho pota-pota lintlheng tse bohale kapa lihukung. Se ke oa tsamaisa sesebelisoa holim'a thapo. Beha mohala hole le libaka tse futhumetseng.
• U se ke ua qhaqha ka ho hula khoele. Ho qhaqha, tšoara polaka, eseng thapo.
• Se ke oa tšoara plug kapa sesebelisoa ka matsoho a metsi.
• Koala li-control tsohle pele o ka ntša.

3. Likarolo tsa Sehlahisoa

The AURA Livac 114R Suction Machine includes the following main components:

• Main Unit (Motor housing, dust/water container)
• Flexible Hose
• Li-Wands tsa Katoloso
• Carpet Washing Nozzle
• Sesefa sa Lerōle
• Water Tank (for carpet washing solution)
• Mohala oa Matla

Setšoantšo sa 1: Ho fetaview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.

4. Setupo le Kopano

4.1 Ho phutha

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.

4.2 Attaching the Flexible Hose

1. Locate the suction inlet on the main unit.
2. Insert the flexible hose connector firmly into the inlet until it clicks into place.

4.3 Attaching Extension Wands and Nozzles

1. Connect the desired number of extension wands to the end of the flexible hose.
2. Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.

4.4 Preparing for Carpet Washing

1. Open the extra basin (3.5 L capacity) for the cleaning solution.
2. Tlatsa basin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
3. Ensure the pump connection is secure.

5. Litaelo tsa Ts'ebetso

5.1 Dry Vacuuming (Dust Suction)

1. Ensure the dust filter is correctly installed in the 5 L dust container.
2. Connect the flexible hose and appropriate dry vacuuming nozzle.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the power button (usually green or marked with 'I') to start the motor.
5. Tsamaisa molomo holim'a bokaholimo hore o hloekisoe.
6. After use, press the power button to turn off the machine and unplug it.

5.2 Wet Vacuuming (Water Suction)

CAUTION: Remove the dust filter before wet vacuuming to prevent damage.

1. Tlosa sesepa sa lerōle.
2. Ensure the 6 L waste basin is empty and properly secured.
3. Connect the flexible hose and a suitable wet vacuuming nozzle.
4. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
5. Tobetsa konopo ea matla ho qala enjene.
6. Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
7. After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin hanghang.

5.3 Carpet Washing Function

1. Prepare the cleaning solution in the 3.5 L extra basin as described in Section 4.4.
2. Attach the carpet washing nozzle and ensure the spray hose is connected.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the main power button (for suction) and the pump power button (for spraying solution).
5. Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
6. Immediately move the nozzle over the wet area to suction up the dirty solution.
7. Work in small sections, overlapping slightly.
8. After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
9. Turn off both power buttons and unplug the machine. Empty and clean all basins.

5.4 Mosebetsi oa Mofuthu

1. Locate the blower outlet on the main unit (usually opposite the suction inlet).
2. Attach the flexible hose to the blower outlet.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Tobetsa konopo ea matla ho kenya sefutho.
5. Direct the airflow as needed for blowing dust or drying surfaces.
6. After use, press the power button to turn off the machine and unplug it.

6. Tlhokomelo

Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.

6.1 Emptying and Cleaning the Dust/Waste Basin

• After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
• Hlatsoa basin thoroughly with clean water and allow it to air dry completely before reassembling.

6.2 Ho Hloekisa Sefe ea Lerōle

• For dry vacuuming, regularly check and clean the dust filter.
• Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
• Hlakola sefe haeba se senyehile kapa se tsofetse haholo.

6.3 Cleaning the Extra Basin (Solution Tank)

• After carpet washing, empty any remaining cleaning solution.
• Rinse the 3.5 L extra basin with clean water to prevent residue buildup.

6.4 Cleaning Hoses and Nozzles

• Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
• Ensure they are dry before storage.

6.5 Polokelo

Store the appliance and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Ho rarolla mathata

8. Litlhaloso

• Mohlala: Livac 114R
• Lebitso: AURA
• Max. Matla a Enjene: 2000 W
• Matla a Suction: 1950 mmH2O
• Moqtage: 220 - 240 V AC
• Hangata: 50/60 Hz
• Ho foka ha moea: 200 m³/h
• Bokhoni ba ho hula: 1.5 L/s
• Matla a Pump: 26 W
• Khatello ea Pompo: 2.5 bar
• Waste Basin Bolumo: 6 L
• Bokhoni ba nkho ea Lerōle: 5 L
• Extra Basin Volume (Solution Tank): 3.5 L
• Boima ba Ntho: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
• Likarolo tse Khethehileng: Dry, Wet, Carpet Washing, Blower Function

9. Tiisetso le Tšehetso

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA websebaka. Boloka rasiti ea hau ea theko e le bopaki ba hore u rekile.

For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.