Buka ea Mosebetsi ea Khamera ea Evolove StrongVision Mini Trail

1. Selelekela

Thank you for choosing the Evolveo StrongVision Mini Trail Camera. This compact and robust camera is designed for wildlife observation, hunting, and security applications, offering high-resolution photos and Full HD videos with night vision capabilities. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance.

Setšoantšo sa 1.1: Pele view of the Evolveo StrongVision Mini Trail Camera. The camera features a camouflage pattern, a main lens, and an upper display panel.

2. Likahare tsa Sephutheloana

Ka kopo, sheba litaba tsa sephutheloana ho netefatsa hore lintho tsohle li teng:

• Evolveo StrongVision Mini Trail Camera
• Mounting Strap
• Sebali sa karete ea Micro SD
• Cable ea USB
• Bukana ea Mosebelisi

Setšoantšo sa 2.1: Included accessories: Evolveo StrongVision Mini camera, mounting strap, USB cable, and user manual.

3. Sehlahisoa Overview

The StrongVision Mini is a compact trail camera designed for ease of use and reliable performance. Key features include:

• High Resolution Imaging: Capture photos up to 20 MP and Full HD 1080p videos.
• Pono ea Bosiu ea Infrared: Equipped with 26 850nm IR LEDs for clear night recordings up to 20 meters.
• Lebelo le Potlakileng la ho Qhekella: Activates in just 0.8 seconds.
• Lekunutu le Leholo: 90° Passive Infrared (PIR) sensor for comprehensive coverage.
• Moralo o sa keneleng boemo ba leholimo: IP65 rated for outdoor use in various conditions.
• Boholo bo Compact: Dimensions of 105 x 85 x 40 mm for discreet placement.

Setšoantšo sa 3.1: The compact design of the Evolveo StrongVision Mini, suitable for discreet placement.

4. Seta

4.1. Ho kenya Battery

The camera requires 4 x 1.5V LR6 AA batteries. For optimal performance and extended operation, it is recommended to use high-quality alkaline or rechargeable batteries.

1. Open the camera's latch on the side and gently open the housing.
2. Fumana sebaka sa betri.
3. Kenya libeteri tse 4 tsa AA, ho netefatsa hore polarity (+/-) e nepahetse joalo ka ha ho bontšitsoe ka har'a karolo.
4. Koala sekoaelo sa karolo ea betri ka mokhoa o sireletsehileng.

4.2. Ho kenya karete ea Micro SD

A Micro SD card (up to 32 GB) is required to store photos and videos. Ensure the card is formatted before first use.

1. Ha khamera e butswe, fumana sebaka sa karete ya Micro SD.
2. Insert the Micro SD card into the slot until it clicks into place.
3. Ho tlosa, sutumelletsa karete ka hare hanyenyane ho fihlela e tsoa.

Setšoantšo sa 4.1: Battery compartment and Micro SD card slot inside the camera.

4.3. Tlhophiso ea Pele

The camera can be configured using a settings file on the Micro SD card via your computer. This allows for precise adjustment of parameters such as photo resolution, video resolution, time-lapse intervals, and more.

1. Insert the Micro SD card into your computer using the provided Micro SD card reader.
2. Fumana tlhophiso file (usually a text file or specific software) on the card.
3. Adjust desired settings according to your needs.
4. Boloka tlhophiso file back to the Micro SD card.
5. Safely eject the Micro SD card from your computer and insert it back into the camera.

4.4. Ho kenya Khamera

Use the included mounting strap to secure the camera to a tree, pole, or other suitable surface. Ensure the camera is stable and pointed towards the desired monitoring area.

Setšoantšo sa 4.2: Lehlakore view of the camera showing external ports for connectivity.

5. Ho sebetsa Khamera

5.1. Ho tima/Ho tima

After installing batteries and the Micro SD card, locate the power switch inside the camera housing. Switch it to the "ON" position to activate the camera. To turn off, switch it to "OFF".

5.2. Mekhoa ea ho sebetsa

The camera supports various operating modes, which can be configured via the settings file:

• Mokhoa oa foto: Captures still images. Resolutions include 20 MP, 16 MP, and 12 MP.
• Mokhoa oa Video: Records video clips. Resolutions include 1080p, 720p, and VGA.
• Senepe + Mokhoa oa Video: Captures a photo followed by a video clip.
• Mokhoa oa ho felloa ke nako: Takes photos at set intervals.

5.3. Motion Detection and Recording

The camera utilizes a Passive Infrared (PIR) sensor to detect motion. When motion is detected within its 90° field of view, the camera will trigger and record based on your configured settings.

• Lebelo la ho Qala: The camera activates quickly, with a trigger speed of 0.8 seconds.
• Li-LED tsa IR: For low-light or nighttime conditions, 26 850nm IR LEDs provide illumination up to 20 meters (optimal illumination 6-8 meters).
• Shot Series: Configure the number of photos taken per trigger (1, 3, 6, or 9 shots).
• Nako ea ho Pholisa: Set the delay between triggers (1, 5, 10, or 30 seconds/minutes).

5.4. Viewng Files

Ho view lifoto le livideo tse hapiloeng:

1. Turn off the camera and remove the Micro SD card.
2. Insert the Micro SD card into your computer using the card reader.
3. Access the files on the card. Photos are saved in JPEG format, and videos in AVI format.
4. Emong le emong file will include a date and time stamp.

6. Tlhokomelo

6.1. Ho hloekisa

Wipe the camera's exterior with a soft, damp cloth. Ensure the lens and PIR sensor are clean and free from dirt or debris for optimal performance. Do not use harsh chemicals or abrasive cleaners.

6.2. Phetoho ea Battery

Replace batteries when the low battery indicator appears or when performance degrades. Always replace all batteries at once with new ones of the same type.

6.3. Polokelo

When not in use for extended periods, remove the batteries to prevent leakage. Store the camera in a cool, dry place away from direct sunlight.

7. Ho rarolla mathata

• Khamera ha e sebetse:
  • Sheba polarity ea betri.
  • Netefatsa hore libeteri li tjhajiloe ka botlalo kapa li nchafalitsoe.
  • Netefatsa hore sesebelisoa sa motlakase se maemong a "ON".
• No photos/videos recorded:
  • Ensure a Micro SD card is inserted and properly formatted.
  • Check if the Micro SD card is full.
  • Verify camera settings for recording mode and trigger sensitivity.
  • Netefatsa hore sensor ea PIR ha e thijoe.
• Boleng bo bobe ba setšoantšo/video:
  • Hloekisa lense ea khamera.
  • Check resolution settings.
  • Ensure sufficient lighting for daytime shots; for night shots, ensure objects are within IR range.
• Bophelo bo bokhuts'oane ba betri:
  • Sebelisa libeteri tsa boleng bo holimo tsa alkaline kapa tse tjhajoang hape.
  • Reduce the number of photos per trigger or increase recovery time.
  • Consider external power options like the Evolveo solar panel (sold separately).

8. Litlhaloso

9. Tiisetso le Tšehetso

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Evolveo websebaka. Boloka bopaki ba hau ba theko bakeng sa likopo life kapa life tsa waranti.

Moetsi: Naxya Limited