Universal Tabletop TV Stand User Manual

Selelekela

Thank you for choosing the ErgoAV Universal Tabletop TV Stand, Model ERTSM1-01B. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new TV stand. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Setšoantšo: Pele view of the ErgoAV Universal Tabletop TV Stand, showcasing its sleek design with a glass base and metal support column, ready for TV mounting.

Likarolo tsa Bohlokoa

• Tšebelisano ea bokahohle: Designed to fit most 40-55 inch flat-panel TVs.
• Moroalo o Phahameng: Supports TVs weighing up to 88 lbs (40 kg).
• Tumellano ea VESA: Compatible with VESA patterns from 100x100mm to 400x400mm.
• Fetolehang Bophahamo: Features 6 different height positions for optimal viewing and soundbar placement.
• Ntlafatso ea Botsitso: Equipped with an oversized tempered glass base for a secure and stable foundation.
• Safety Straps Included: Provides additional anti-tip security to prevent accidental tipping.

Image: Diagram illustrating the universal compatibility of the TV stand, highlighting TV size range (40" to 55"), load capacity (88 lbs), and VESA range (100x100mm to 400x400mm).

Setšoantšo: Haufi view of the TV stand's mounting bracket, showing three distinct height settings labeled High (18.13"), Medium (16.16"), and Low (14.19"), indicating the adjustable height feature.

Litlhaloso

Image: Detailed diagram showing the key dimensions of the assembled TV stand, including the base width (15.74"), base depth (10.24"), overall height (23.77"), and TV bracket width (16.93") and height (16.73").

Boitsebiso ba Tšireletseho

Please read and understand all safety warnings and instructions before assembly and use. Failure to do so may result in serious personal injury or property damage.

• Weight Limit: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can cause instability and potential injury.
• Boholo ba TV: This stand is designed for TVs between 40 and 55 inches. Using a TV outside this range may compromise stability.
• Ts'ebetsong ea VESA: Ensure your TV's VESA mounting pattern falls within the supported range (100x100mm to 400x400mm).
• Sireletsehile ho Kena: Always ensure all screws and bolts are securely tightened before placing the TV on the stand. Do not overtighten.
• Mabanta a Khahlanong le Malebela: Utilize the included safety straps to anchor the TV stand to the wall, preventing accidental tipping, especially in homes with children or pets.
• Boemo ba Boemo: Place the TV stand on a flat, level, and stable surface to prevent wobbling or tipping.
• Bana le Liphoofolo: Keep children and pets away from the assembly area. Do not allow children to climb on or play with the TV stand or TV.
• Handling Glass: The base is made of tempered glass. Handle with care to avoid chipping or breaking. Do not place heavy or sharp objects on the glass.

Image: The TV stand with the included safety straps attached, demonstrating how they can be used to secure the stand and TV to a wall, enhancing stability and preventing accidental tipping.

Image: A lifestyle shot showing the TV stand with a TV placed on it, positioned on a media console in a living room setting, emphasizing its stable and safe appearance during use.

Litaba tsa Sephutheloana

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, do not attempt to assemble. Contact ErgoAV customer support for assistance.

• Tempered Glass Base
• Tšehetso Column
• TV Mounting Bracket (Horizontal Bar)
• TV Mounting Arms (Vertical Rails, 2 pcs)
• Safety Anti-Tip Straps (2 pcs)
• Hardware Kit (various screws, washers, spacers, nuts, Allen key, wrench)

Ho seta le ho Kenya

Before you begin, ensure you have a Phillips head screwdriver and a level (not included). It is recommended to have two people for assembly, especially when mounting the TV.

Step 1: Assemble the Base and Support Column

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the support column to the tempered glass base using the provided screws and Allen key. Ensure the column is centered and securely fastened.

Step 2: Attach the TV Mounting Bracket

1. Secure the horizontal TV mounting bracket to the top of the support column using the designated screws.

Step 3: Attach Mounting Arms to Your TV

1. Tseba masoba a ho kenya VESA ka morao ho TV ea hau.
2. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
3. Attach the two vertical TV mounting arms to the back of your TV. Ensure the hooks on the arms are facing upwards and the same direction. Do not overtighten.

Mohato oa 4: Kenya TV ho Stand

1. With assistance, carefully lift your TV and hook the mounting arms onto the horizontal TV mounting bracket on the stand.
2. Adjust the TV to your desired height by sliding the mounting arms up or down along the vertical slots on the horizontal bracket. Secure the TV in place using the locking screws or knobs on the mounting arms.
3. Use a level to ensure the TV is straight.

Step 5: Install Safety Straps

1. Attach one end of each safety strap to the designated points on the TV stand or the TV mounting arms.
2. Secure the other end of the straps to a wall stud or a sturdy piece of furniture using appropriate hardware (not always included, but typically screws for wood studs or anchors for drywall). This step is crucial for preventing accidental tipping.

Litaelo tsa Ts'ebetso

Once assembled, the ErgoAV Tabletop TV Stand is designed for simple operation.

• Phetoho ea Bophahamo: To change the TV's height, loosen the locking screws on the vertical mounting arms, carefully lift or lower the TV to one of the 6 pre-set height positions, and then re-tighten the locking screws securely. Always ensure the TV is level after adjustment.
• Tsamaiso ea Cable: Utilize any integrated cable management clips or channels on the support column to keep cables tidy and out of sight.

Tlhokomelo

Regular maintenance will help ensure the longevity and safety of your TV stand.

• Ho hloekisa: Sebelisa bonolo, damp cloth to clean the glass base and metal components. Avoid abrasive cleaners or solvents that could damage the finish.
• Sheba Likhokahano: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Hlahloba Mehala: Regularly inspect the anti-tip safety straps for any signs of wear or damage. Replace if compromised.

Ho batle phoso

If you encounter any issues during assembly or use, please refer to the following common problems and solutions:

• TV is Wobbly:
  • Ensure the stand is on a flat, level surface.
  • Check that all assembly screws (base to column, column to bracket, arms to TV) are securely tightened.
  • Verify the TV's weight does not exceed 88 lbs and its size is within 40-55 inches.
  • Ensure safety straps are properly installed and anchored.
• TV Does Not Fit Mounting Arms:
  • Confirm your TV's VESA pattern is within the 100x100mm to 400x400mm range.
  • Ensure you are using the correct screws and spacers for your TV's mounting holes.
• Likarolo tse sieo:
  • Carefully check all packaging materials. If parts are genuinely missing, contact ErgoAV customer support.

Warranty le Tšehetso

ErgoAV is committed to providing high-quality products. While specific warranty details are not provided in this document, please refer to the product packaging or the official ErgoAV websaete bakeng sa tlhaiso-leseling e felletseng.

For technical support, missing parts, or any questions regarding your ErgoAV Universal Tabletop TV Stand, please visit the ErgoAV Store on Amazon kapa buisana le mohlanka Buka ea mosebelisi (PDF) bakeng sa litaelo tse qaqileng haholoanyane.