Tefcold SCU1425H
Buka ea Mosebetsi ea Tefcold SCU1425H ea ho Pholisa Botlolo
Model: SCU1425H
1. Selelekela
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Tefcold SCU1425H Bottle Cooler. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The Tefcold SCU1425H is a display refrigerator designed for cooling and showcasing bottled beverages. It features a black exterior finish, black ABS interior, and vertical LED interior lighting.
Setšoantšo sa 1.1: Pele view of the Tefcold SCU1425H Bottle Cooler, showcasing its black finish and interior LED lighting with bottles arranged on shelves.
2. Litaelo tsa Tšireletso
Kamehla latela mehato ea ts'ireletso ea mantlha ha u sebelisa lisebelisoa tsa motlakase ho fokotsa kotsi ea mollo, ts'okelo ea motlakase le likotsi ho batho.
- Etsa bonnete ba hore sesebelisoa se hlophisitsoe hantle.
- Se ke oa sebelisa sesebelisoa ka thapo kapa plug e senyehileng.
- Boloka menyako ea moea e le ntle ho tšitiso.
- Se ke oa boloka lintho tse phatlohang joalo ka makotikoti a aerosol a nang le propellant e tukang ka har'a sesebelisoa sena.
- Sesebelisoa sena se reretsoe tšebeliso ea khoebo feela.
3. Ho seta le ho kenya
3.1 Ho phutha
Carefully remove the appliance from its packaging. Inspect for any shipping damage. Report any damage immediately to your supplier.
3.2 Ho bea
Place the unit on a firm, level surface. Ensure adequate ventilation around the unit. Maintain a minimum clearance of 10 cm (4 inches) from walls and other objects to allow for proper airflow and heat dissipation.
Image 3.1: Technical drawing showing the external dimensions (595 x 595 x 1990 mm) and internal dimensions (505 x 462 x 1742 mm) of the Tefcold SCU1425H.
3.3 Ho leka-lekana
The unit is equipped with adjustable feet. Use a spirit level to ensure the appliance is perfectly level before operation. This is crucial for proper door sealing and drainage.
3.4 Khokelo ea Motlakase
Connect the appliance to a suitable grounded power outlet. Refer to the specifications section for power requirements.
4. Litaelo tsa Ts'ebetso
4.1 Qalong ea ho qala
After installation, wait at least 2 hours before plugging in the unit to allow refrigerants to settle. Once plugged in, the unit will begin cooling. The internal temperature range is 2 to 10 °C.
4.2 Taolo ea Mocheso
The appliance features a mechanical temperature controller. Adjust the setting as needed to achieve the desired internal temperature within the specified range.
4.3 Loading the Unit
Distribute bottles evenly on the shelves. Do not block the internal air circulation vents. Overloading the unit or blocking airflow can impair cooling performance.
Setšoantšo sa 4.1: Hare-hare view of the Tefcold SCU1425H, showing the adjustable shelves and vertical LED lighting.
5. Tlhokomelo
5.1 Ho hloekisa
Regularly clean the interior and exterior of the unit with a mild detergent and warm water. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
5.2 Condenser Cleaning
The condenser coil should be cleaned periodically (every 3-6 months) to ensure efficient operation. Dust and debris can accumulate on the coil, reducing cooling efficiency and increasing energy consumption. Consult a qualified technician for condenser cleaning if you are unsure.
5.3 Ho kokobetsa serame
This unit features automatic defrosting. However, if excessive ice buildup occurs, manually defrost the unit by unplugging it and leaving the door open until all ice has melted. Dry the interior thoroughly before restarting.
6. Ho rarolla mathata
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Yuniti ha e pholile | No power; Thermostat set too high; Blocked condenser; Door not sealed properly. | Check power supply; Adjust thermostat; Clean condenser; Check door gasket. |
| Lerata le feteletseng | Yuniti ha e batalatse; Likarolo tse hlephileng; Thibelo ea fene. | Level the unit; Check for loose parts; Clear fan area. |
| Metsi fatše | Clogged drain tube; Excessive humidity. | Clear drain tube; Ensure proper ventilation. |
7. Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | SCU1425H |
| Litekanyo tsa Kantle (WxDxH) | 595 x 595 x 1990 limilimithara |
| Litekanyo tsa ka Hare (WxDxH) | 505 x 462 x 1742 limilimithara |
| Moqolo o felletseng | 387 Lithara |
| Molumo oa Net | 347 Lithara |
| Mocheso Range | 2 ho isa ho 10 °C |
| Sehatsetsi | R600a (Charge: 85g) |
| Tšebeliso ea Matla | 1.87 kWh/24h (683 kWh/annum) |
| Index ea Matla a Matla (EEI) | 38.9 |
| Bolumo ba EEI | 399 L |
| Boemo ba Lerata | 45 dB(A) |
| Sehlopha sa Tlelaemete | 4 |
| Lebone la ka hare | Thepa ea LED |
| Mofuta oa Defrost | Ka ho iketsa |
Image 7.1: EU Energy Label for Tefcold SCU1425H, showing energy class D, 683 kWh/annum consumption, and 399 L capacity.
For more details, visit the official EU EPREL database: https://eprel.ec.europa.eu/qr/647357
8. Tiisetso le Tšehetso
For warranty information and technical support, please contact your local Tefcold distributor or the point of purchase. Keep your purchase receipt as proof of purchase.
Information regarding spare parts availability is not directly provided in the product specifications. Please contact customer support for inquiries about spare parts.