AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ Camera User Manual

Selelekela

This manual provides detailed instructions for the setup, operation, and maintenance of your AIDA Imaging PTZ-NDI-X18B Broadcast NDI|HX FHD NDI/IP/HDMI 18X Zoom PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Setšoantšo sa 1: Pele view of the AIDA Imaging PTZ-NDI-X18B Camera, showcasing its compact design and NDI|HX branding.

Se ka Lebokoseng

• AIDA Imaging Full HD NDI|HX Broadcast PTZ Camera with 18x Optical Zoom (Black)
• Remote Control
• Bracket ea ho Beha Khamera
• Adapter ea Matla
• Motlakase oa Motlakase
• Tlhahisoleseding e Lekanyelitsoeng ea Tiisetso ea Selemo se 2

Tlhophiso

Follow these steps to set up your PTZ camera for initial use.

1. Ho phutha: Carefully remove all components from the packaging. Verify that all items listed in "What's in the Box" are present.
2. Ho hlongoa: The camera supports wall mounting. Use the provided camera mounting bracket to securely install the camera in your desired location. Ensure the mounting surface is stable and can support the camera's weight.
3. Khokelo ea Matla: Connect the power adapter to the camera's DC12V input port and then plug the power cable into a suitable power outlet.
4. Video Output Connection:
   • HDMI Output: Connect an HDMI cable from the camera's HDMI port to your display or video switcher.
   • IP/NDI Output: Connect an Ethernet cable from the camera's NDI/IP port to your network switch or router. This enables NDI|HX streaming and IP control.
5. Audio Input (Optional): If external audio is required, connect an audio source to the "Line in" port.
6. Control Connections (Optional): For RS232 control, connect appropriate cables to the IN-RS232-OUT ports.

Setšoantšo sa 2: Ka morao view of the camera showing connection ports including RS232, HDMI, Line In, NDI/IP, and DC12V power input.

Litaelo tsa Ts'ebetso

This section details the basic operation of the PTZ-NDI-X18B camera.

Ho tima/Ho tima

Once connected to power, the camera will automatically power on. To power off, disconnect the power cable.

Pan, Tilt, and Zoom (PTZ) Control

The camera features pan, tilt, and 18x optical zoom capabilities. Control can be achieved via the included remote control or through NDI|HX protocol over the network.

• Remote Control: Use the directional buttons on the remote to pan and tilt the camera. Use the zoom buttons to adjust the 18x optical zoom.
• NDI|HX Control: Connect the camera to an NDI-compatible network. Use NDI-enabled software or hardware controllers to remotely control pan, tilt, and zoom functions with low latency.

Sephetho sa Video

The camera provides simultaneous IP and HDMI outputs. This allows for flexible integration into various production workflows.

• HDMI: Provides a direct Full HD video feed to a monitor or switcher.
• NDI|HX: Streams Full HD video and audio over your network with low latency, compatible with NDI-enabled devices and software.

Image Quality Features

The camera utilizes a Full HD Progressive Scan sensor and an advanced digital image processor to deliver sharp, vivid images. It also includes a motion-compensated temporal noise reduction filter for clear video even in challenging lighting conditions.

Tlhokomelo

Tlhokomelo e nepahetseng e netefatsa bophelo bo bolelele le ts'ebetso e nepahetseng ea khamera ea hau.

• Ho hloekisa: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution. Avoid harsh chemicals or abrasive materials.
• Lisebelisoa tsa Firmware: Periodically check the AIDA Imaging website for firmware updates. Keeping the firmware current can improve performance and add new features.
• Maemo a Tikoloho: Operate the camera within recommended temperature and humidity ranges. Avoid exposing the camera to extreme temperatures, moisture, or dust.

Ho batle phoso

Haeba o kopana le mathata ka khamera ea hau, sheba mathata le litharollo tse latelang tse tloaelehileng.

• Ha ho Matla:
  • Netefatsa hore adaptara ea motlakase e hokahantsoe ka mokhoa o sireletsehileng ho khamera le soketeng ea motlakase e sebetsang.
  • Verify the power cable is not damaged.
• No Video Output (HDMI):
  • Check the HDMI cable connection at both the camera and the display/switcher.
  • Try a different HDMI cable or input port on your display.
  • Ensure the display is set to the correct input source.
• No Video Output (NDI/IP):
  • Verify the Ethernet cable is securely connected and the network is active.
  • Ensure your NDI-compatible software or hardware is properly configured to detect NDI sources on the network.
  • Check the camera's IP settings (refer to advanced network configuration documentation if needed).
• PTZ Control Not Responding:
  • For remote control, ensure batteries are functional and there are no obstructions.
  • For NDI|HX control, verify network connectivity and NDI control software settings.
• Boleng bo Fosahetseng ba Litšoantšo:
  • Ensure the lens is clean and free of dust or smudges.
  • Check lighting conditions in the environment.
  • Verify camera settings (e.g., exposure, white balance) are appropriate for the current environment.

If the problem persists, please contact AIDA Imaging customer support.

Litlhaloso

Warranty le Tšehetso

Boitsebiso ba Warranty

This AIDA Imaging PTZ-NDI-X18B camera comes with a Limited 2-Year Warranty. Please refer to the warranty card included in your product packaging for full terms and conditions.

Tšehetso ea Bareki

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact AIDA Imaging customer support through their official websaete kapa lintlha tsa ho ikopanya tse fanoeng ha u reka.

Websebaka: www.aidaimaging.com